any one know where i can get hold of a flex disk? seem to be few about to find? any brands recommended??
cheers
Guilbo FLEX DISK
Moderator: martauto
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Readily available from BMW, and Lemforder is supplied by Meatballs82 at Eurocarparts.
-
jessieparsons1
- E30 Zone Newbie
- Posts: 111
- Joined: Tue Oct 09, 2007 11:00 pm
Cheers Brianmooooore...
i was kinda suspecting a motorfactors to stock them but wasn't 100% sure! Thanks for the reply tho buddy!
i was kinda suspecting a motorfactors to stock them but wasn't 100% sure! Thanks for the reply tho buddy!
-
capri_rob
- Married to the E30 Zone
- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
Propshaft or steering coupling ?
You can definately get Lemforder ones from Matt - Main dealer ones are stupid money - I think I paid about £70
To be fair though it did appear to be the 22 year old 145k original that I took off so you wont need to replace it again in a hurry
You can definately get Lemforder ones from Matt - Main dealer ones are stupid money - I think I paid about £70
To be fair though it did appear to be the 22 year old 145k original that I took off so you wont need to replace it again in a hurry
e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Make sure you fit the new one with the arrows adjacent to each bolt hole pointing towards the flange it is bolted to, or it will last about a month.
-
jessieparsons1
- E30 Zone Newbie
- Posts: 111
- Joined: Tue Oct 09, 2007 11:00 pm
Right next problem! E30 flex disk I ordered is the wrong size, assumed that it hadn't been changed with my engine conversion 
. The part that I need fits to a M52 engine and gearbox assembly, and then to what’s marked as a Z3m front prop shaft. I have taken the part numbers off the flex disk and when I called my local motor factors they quoted me to a E36 M3?? And that this part is not made buy any aftermarket manufactures? I find this very hard to believe”¦ so to the ZONE for answers!
The flex disk has a BMW print on it as well as the following refrances
2 226 527 (part number)
GAB 82
SGF
Dimensions”¦.
35mm long
132mm wide
96mm length across 2 bolt holes
47mm centre hole width
Any help would be greatly appreciated!
Jack
. The part that I need fits to a M52 engine and gearbox assembly, and then to what’s marked as a Z3m front prop shaft. I have taken the part numbers off the flex disk and when I called my local motor factors they quoted me to a E36 M3?? And that this part is not made buy any aftermarket manufactures? I find this very hard to believe”¦ so to the ZONE for answers! The flex disk has a BMW print on it as well as the following refrances
2 226 527 (part number)
GAB 82
SGF
Dimensions”¦.
35mm long
132mm wide
96mm length across 2 bolt holes
47mm centre hole width
Any help would be greatly appreciated!
Jack
-
DanThe
- E30 Zone Team Member
- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Just ask for one from a late E36 328i, ZF gearbox
-
jessieparsons1
- E30 Zone Newbie
- Posts: 111
- Joined: Tue Oct 09, 2007 11:00 pm
Just sorted that out, got thrown off by a useless motor factors...
Cheers for the help tho!
Cheers for the help tho!