Leather reconnolising
Moderator: martauto
-
Adtheant
- E30 Zone Newbie

- Posts: 49
- Joined: Tue Aug 14, 2012 11:00 pm
- Location: Kent
Hi, does anybody know of a good place to have a set of blue leather E30 seats reconnolised/refurbished? Preferably in the Kent area. Also does anybody have a rough idea of the cost? Thanks
-
Gavla
- E30 Zone Squatter

- Posts: 1586
- Joined: Tue Dec 06, 2011 11:00 pm
I looked into this about a year ago and remember it being very expensive compared to doing it myself.
I bought everything I needed from liquidleather.com and a small compressor. If you do it yourself and follow the instructions 100% your seats will look brand new. Just one thing I would suggest is put a few thin coats on rather than be tempted with thicker coats to save time. Set aside the week end to do a proper job i.e give the seats a proper clean and feed on Saturday morning and colour them on Sunday morning, fit them Sunday afternoon / evening.
Let me know if you need any other info.
I bought everything I needed from liquidleather.com and a small compressor. If you do it yourself and follow the instructions 100% your seats will look brand new. Just one thing I would suggest is put a few thin coats on rather than be tempted with thicker coats to save time. Set aside the week end to do a proper job i.e give the seats a proper clean and feed on Saturday morning and colour them on Sunday morning, fit them Sunday afternoon / evening.
Let me know if you need any other info.
-
Adtheant
- E30 Zone Newbie

- Posts: 49
- Joined: Tue Aug 14, 2012 11:00 pm
- Location: Kent
That's great, thank you. It's not for my car, it's for my friend so i shall pass on the info. 
-
Gavla
- E30 Zone Squatter

- Posts: 1586
- Joined: Tue Dec 06, 2011 11:00 pm
The compressor was a mini hobby one, did the job but honestly I would rather rent a bigger one for the day from HSS Hire or similar as it would be much quicker.diable wrote:@Gavla, what compressor did you buy and what did you dilute your liquid leather with and by what %
The first coat I diluted 1:1 the second coat was about 3 parts scuff master to 1 part water.
Hope that helps.
