exhaust wrap
Moderator: martauto
-
steve_k
- E30 Zone Team Member

- Posts: 8044
- Joined: Fri May 23, 2008 11:00 pm
- Location: in the vale of mansfield
Right then folks,
been thinking about wrapping my 6 branch manifold & system.
now I know i'm going to have to take the manifold off but i'd like to know is how hard/easy is it to wrap the manifold? I've never done it before so bear with me lol.
been thinking about wrapping my 6 branch manifold & system.
now I know i'm going to have to take the manifold off but i'd like to know is how hard/easy is it to wrap the manifold? I've never done it before so bear with me lol.
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
it's easy ,just keep it tight and buy extra metal ties as they don't send enough with the wrap.
you'll work it out as you go along,do one tube at a time and individually ending in a place you can continue from picking up the other tubes as you go if that makes sense
you'll work it out as you go along,do one tube at a time and individually ending in a place you can continue from picking up the other tubes as you go if that makes sense

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
[manifold]

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
rich318i
- E30 Zone Addict

- Posts: 2393
- Joined: Wed Oct 26, 2005 11:00 pm
- Location: Brands :) :)
100% good stuff
-
steve_k
- E30 Zone Team Member

- Posts: 8044
- Joined: Fri May 23, 2008 11:00 pm
- Location: in the vale of mansfield
Cheers mick 
already got some extra matel cable ties on order.
thankfully the manifold is a magnex 6 branch so shouldn't be to hard to do lol.
already got some extra matel cable ties on order.
thankfully the manifold is a magnex 6 branch so shouldn't be to hard to do lol.
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
i ought to mention that it smokes like fook for a while on the first heat so don't call the fire brigade 

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
steve_k
- E30 Zone Team Member

- Posts: 8044
- Joined: Fri May 23, 2008 11:00 pm
- Location: in the vale of mansfield
Evening folk's.
looks like i'll finally be doing this at the weekend
I forgot to ask in my OP do I need to wet the wrap before/as I fit it?
same as you do with holts exhaust repair bandage??
T.I.A folks.
looks like i'll finally be doing this at the weekend
I forgot to ask in my OP do I need to wet the wrap before/as I fit it?
same as you do with holts exhaust repair bandage??
T.I.A folks.
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
-
steve_k
- E30 Zone Team Member

- Posts: 8044
- Joined: Fri May 23, 2008 11:00 pm
- Location: in the vale of mansfield
C'mon surely someone must know?? Lol.
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
-
penton08
- E30 Zone Camper

- Posts: 1206
- Joined: Sat May 10, 2008 11:00 pm
I wet mine before fitting and it has not hurt it!! As Mick said though it smoked like fook on the first start up 
-
steve_k
- E30 Zone Team Member

- Posts: 8044
- Joined: Fri May 23, 2008 11:00 pm
- Location: in the vale of mansfield
cheer's for that dudepenton08 wrote:I wet mine before fitting and it has not hurt it!! As Mick said though it smoked like fook on the first start up
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
-
ajay
- E30 Zone Camper

- Posts: 1041
- Joined: Fri Nov 24, 2006 11:00 pm
My old manifold dry wrapped, as said above it will smoke a lot once heated the first time and don,t breave the fumes either.
. Oh yeah make sure you have enough wrap!
. Oh yeah make sure you have enough wrap!-
steve_k
- E30 Zone Team Member

- Posts: 8044
- Joined: Fri May 23, 2008 11:00 pm
- Location: in the vale of mansfield
Cheer's ajay
got 10 meters of it but if I need anymore it's cheap enough lol.
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
Is it worth doing this with a M52 manifold?
-
miniblob
- E30 Zone Addict

- Posts: 3153
- Joined: Thu Jan 05, 2006 11:00 pm
- Location: Croydon/Uckfield
I didn't wet mine before I wrapped my old manifold, which could be why I thought it was a horrible job and had little splinters of the fibreglass stuff everywhere!!!!
327 Touring with bass!!!
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
>>> WWW.DNRVINYL.CO.UK >>> UK GARAGE SPECIALIST >>>
>>> WWW.DNRVINYL.COM >>> FREE MIX DOWNLOADS!!! >>>
-
Rancid
- E30 Zone Regular

- Posts: 342
- Joined: Sat Feb 04, 2012 11:00 pm
- Location: Bournemouth, Dorset
When I did a manifold a few years ago I wet the wrap before use, it prevents the fibreglass strands from coming loose so quickly and easily meaning your skin will be less irritated.
In addition to that though, wear gloves & long sleeves to lessen the itchiness that follows
In addition to that though, wear gloves & long sleeves to lessen the itchiness that follows
Formerly known as Rancido64.
e30less at present, working on that one....
-> Xbox360 Halo freak, GT: a wild Rancid
Mobile Phone Technical Support:
Got a problem with your mobile phone?
PM me and I'll do my best to help
e30less at present, working on that one....
-> Xbox360 Halo freak, GT: a wild Rancid
Mobile Phone Technical Support:
Got a problem with your mobile phone?
PM me and I'll do my best to help

