E30 Dyno Graphs Required for New Wiki Page

[Kedge]

Folks,

I've started a new wiki page. The idea is to have as many dyno graphs as possible so people can easily find information showing gains and losses from different mods/engines etc etc. Even if yours is just a standard engine it'd still be great to have!

Anyone that's got a graph from a run they've done, can you post it on here with as much detail as possible.

Much appreciated.

Here's the page - http://www.e30zone.net/e30zonewiki/inde ... yno_Graphs

[bss325i]

'89 325i Sport with low compression ration 8.8:1 M20B25.

Before and after BTB2 manifold, no other mods.

[Rav335uk]

'89 325i Sport with low compression ration 8.8:1 M20B25.

Before and after BTB2 manifold, no other mods.

That can't be right Baz, only 0.2 bhp increase with the Manifold change

[teamalsoran]

Uploaded with ImageShack.us

two for the price of one here!

the lower powered graph was my 240bhp 2.5 litre m10, custon accratlie pistons in a 2.5 s14 bottom end, m10 121 head 12.1CR schrick 336 cam, 50mm jenvey throttle bodies.

upper powered graph is a 2.6 litre 275bhp s14, 95.34mm wosner pistons 11.5:1, 91mm stroke steel crank, ported head, schrick 292/284 cams

[Rav335uk]

^^^^WOW^^^^^^

[Kedge]

Cheers Barry, saves me looking for that one

Impressive results there teamalsoran, soem serious effort and coin involved there!!

[bss325i]

That can't be right Baz, only 0.2 bhp increase with the Manifold change

Are you blind?

[teamalsoran]

Uploaded with ImageShack.us

2.0 m10, ported 121 head 12.1 cr, lester owen reduced overlap 336 cam, 45mm jenveys

[Duke137]

That can't be right Baz, only 0.2 bhp increase with the Manifold change

Are you blind?

Ravin it

[Rav335uk]

That can't be right Baz, only 0.2 bhp increase with the Manifold change

Are you blind?

Take a look at what your posted, It shows only 2 figures.

[bss325i]

Look at the lines man!

[magpie]

my chipped m42




nippy little screamer

[teamalsoran]

Uploaded with ImageShack.us

2.4litre s14 turbo, 2.3 215bhp top end, custom pistons, t38 turbo, huge intercooler and not much boost!

spikes in graph low down was a gearchange.

[Kedge]

my chipped m42




nippy little screamer

What chip was it dude?

We need as much information on spec as possible otherwise it's too vague add to the Wiki as people won't know exactly what they're looking at.

[magpie]

it's an evolve 18 bhp chip with k&n panel filter the rest is standard.

[blondboy84]

'89 325i Sport with low compression ration 8.8:1 M20B25.

Before and after BTB2 manifold, no other mods.

That can't be right Baz, only 0.2 bhp increase with the Manifold change

is it really torque just 175Nm???

and bhp is from 172 to 185 ;)

[magpie]

here's craigeeb's m50 turbo

[maggspower]

'89 325i Sport with low compression ration 8.8:1 M20B25.

Before and after BTB2 manifold, no other mods.

That can't be right Baz, only 0.2 bhp increase with the Manifold change

is it really torque just 175Nm???

and bhp is from 172 to 185 ;)

The graph is plotted with ftlb measuring the torque. So if the figure is 175ftlb that is 237nm

[Rav335uk]

Look at the lines man!

Calm down Bazza, Chill !!

[bss325i]

is it really torque just 175Nm???

and bhp is from 172 to 185 ;)

No, torque is lbft and went from 170 or there abouts to over 190.

BHP went from 171 to 185.

[teamalsoran]

Uploaded with ImageShack.us

2.2 litre m10 turbo, schrick 284 cam, t34 turbo

[teamalsoran]

lots of lines on above graph, thats high and low boost settings

[Dezzy]

here's craigeeb's m50 turbo

Now thats


Mine is a handfull, Craig's must be off it! Very good work!

[leeparkes]

I have a dodgy looking print out but the figure is reliable.

Engine is Alpina B10, basically a tuned M30.
Spec is...

Mahle pistons
M5 rods
Flowed head with Hemi chambers
Larger valves
268 cam
Remapped ECU

257hp @ 5450rpm 285 lb/ft @ 4200rpm

[e30topless]

'89 325i Sport with low compression ration 8.8:1 M20B25.

Before and after BTB2 manifold, no other mods.

That can't be right Baz, only 0.2 bhp increase with the Manifold change

it is sporting a hottuning fannymould Rav

sorry Bazzle

[Rav335uk]

'89 325i Sport with low compression ration 8.8:1 M20B25.

Before and after BTB2 manifold, no other mods.

That can't be right Baz, only 0.2 bhp increase with the Manifold change

it is sporting a hottuning fannymould Rav

sorry Bazzle

[Speedtouch]

I think you'll find the before was the stock 171 bhp (the red line underneath), and after, 185.5/7bhp.

[bss325i]

it is sporting a hottuning fannymould Rav

sorry Bazzle

Christ that gag is as old as mosses!

And, Rav you went to the effort of a supersize ROFL for that?

You're easily amused.

[Rav335uk]

it is sporting a hottuning fannymould Rav

sorry Bazzle

Christ that gag is as old as mosses!

And, Rav you went to the effort of a supersize ROFL for that?

You're easily amused.

It was the largest one I could find Bazza

[leeparkes]

Christ that gag is as old as mosses!

So is Rav.

[Rav335uk]

Christ that gag is as old as mosses!

So is Rav.

Mature is the Word Lee

[magpie]

A+ for effort rav.

good gains Barry

[bss325i]

[magpie]

Christ that gag is as old as mosses!

So is Rav.

Mature is the Word Lee

like cheese !

[Rav335uk]

^^^^^You're older than me Mick^^^^^^^^