M3 convershion

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
Soggy
E30 Zone Newbie
E30 Zone Newbie
Posts: 16
Joined: Thu Mar 15, 2012 11:00 pm
Location: Rochdale

Post Thu Sep 27, 2012 10:07 pm

Ayup folks, I've got a 325m-sport that I've done a e36 2.8 convershion on, it's prety awesome but it's started to smoke it's nut's off now so I've managed to source a 3.Ltr M3 engine/lum/ecu's and just wounderd if any one had done it, I'm going to strip the car over winter to a shell, and then have it fully painted, oh and sort any rusty bits of which I'm shore there's plenty, I believe the brake servo may be a bit of a problem? I all ready put a smaller one on for the 328 convershion and just wounderd if any one had any suggestions? One friend suggested getting a pedal box and doing away with the servo all together? Any help would be greatly appreciated.

Cheers soggy ;-)
Nobby_N
Old Skooler
Old Skooler
Posts: 3954
Joined: Sat Mar 24, 2007 11:00 pm
Location: Boston Lincs Mainly being a Coont

Post Thu Sep 27, 2012 10:10 pm

Where you from mate? England? Hi btw
User avatar
Soggy
E30 Zone Newbie
E30 Zone Newbie
Posts: 16
Joined: Thu Mar 15, 2012 11:00 pm
Location: Rochdale

Post Thu Sep 27, 2012 10:12 pm

Well funny, yer England, Manchester :D
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Thu Sep 27, 2012 10:32 pm

Plenty of guys have done the conversion.
All in here

http://www.e30zone.net/modules.php?name ... forum&f=58
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
BATTS91
E30 Zone Squatter
E30 Zone Squatter
Posts: 1764
Joined: Sat May 01, 2010 11:00 pm
Location: clacton on sea essex

Post Fri Sep 28, 2012 1:05 am

From what i hear you dont want to use a pedal box/ servo delete on a road car im sure a couple of guys here have tryed and said its not advisable ;)
jmc330i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6621
Joined: Mon Jan 10, 2005 11:00 pm
Location: Somerset

Post Fri Sep 28, 2012 7:56 am

What servo have you fitted for 2:8 conversion?
Chances are it will be fine for the S50 conversion if you either mod the plenum or move the servo over closer to the inner wing.

Either way, it will still be tight for space with S50 plenum. And as above, a pedal box isn't recommended for road use.
James
'91 325i Sport
'93 318i touring 16v
User avatar
Soggy
E30 Zone Newbie
E30 Zone Newbie
Posts: 16
Joined: Thu Mar 15, 2012 11:00 pm
Location: Rochdale

Post Fri Sep 28, 2012 8:24 am

I used a Clio servo, I was thinking of maybe a remote servo? I'm going to start striping it soon so I might just offer it up and see just how tight it is.
jmc330i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6621
Joined: Mon Jan 10, 2005 11:00 pm
Location: Somerset

Post Fri Sep 28, 2012 8:44 am

You won't need a remote servo, and that's quite a lot of work. I used the slightly larger Golf servo (in the standard position) and modded the plenum.

If you move the Clio servo over, I expect you would only need to remove a small bit of the plenum corner, if any at all.
James
'91 325i Sport
'93 318i touring 16v
User avatar
Soggy
E30 Zone Newbie
E30 Zone Newbie
Posts: 16
Joined: Thu Mar 15, 2012 11:00 pm
Location: Rochdale

Post Fri Sep 28, 2012 9:01 am

Yer I think it would be best to offer it up first and see how much room there is, if I have to move the servo over it shouldn't cause a grate problem as I will have all the trim out anyway, I take it you have done the convershion?
jmc330i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6621
Joined: Mon Jan 10, 2005 11:00 pm
Location: Somerset

Post Fri Sep 28, 2012 9:21 am

Yeah, about 4-5 years ago. Sold it a couple years ago though :(

Moving the servo over isn't difficult. It gives enough room for the standard E30 servo to be used with your current conversion, so coupled with the smaller servo, should be great help trying to get S50 plenum in.
Have a look through the engine swap forum, the info is in there somewhere.
James
'91 325i Sport
'93 318i touring 16v