i want to remap my e30 but thought to upgrade the injectors before i do this its a standard 320i.
witch would be the best..?
i want to upgrade the injectors on my e30
Moderator: martauto
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
On a 320i? Absolutely no point in doing so.
Best idea is to have your current ones properly cleaned and rebuilt by Injectortune.
Best idea is to have your current ones properly cleaned and rebuilt by Injectortune.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
zeddot
- E30 Zone Newbie

- Posts: 51
- Joined: Tue Jan 24, 2012 11:00 pm
would their be any point in chucking 325 ones in there ?
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
The theory is sound, but without increasing the intake and exhaust flow there's little point. The 320 is a strangled engine, so unless you fit a six branch manifold and a big bore throttle you won't see any benefit; you'll just be flooding the engine with fuel. And if you were going to do all that work, it would be cheaper just to fit a whole 325 engine.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
zeddot
- E30 Zone Newbie

- Posts: 51
- Joined: Tue Jan 24, 2012 11:00 pm
much appreciate the help mate!
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
No problem. In terms of remap there's a seller of chips on here called Speedtouch; he offers chips to give your 320 a mild or wild performance upgrade, depending on the age of the car (needs to be post 1987, IIRC)
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
