Looks the same height as mine dude and mine is standardverde wrote:steve_k wrote:On here stance ain't about stupid camber angles, scraping your sump everywhere you go it's about getting the car sitting properly over a set of period wheels.
have a look in the photo section & you'll see what I mean.
Thats exactly why i started sub low!
Stance doesnt mean a broken sump every 13 miles.
Id call my ride stanced but its not ridiculously slammed. This is a 60/60 drop with 9Js and front and rear 5mm spacers
stance
Moderator: martauto
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
-
scjimbo
- E30 Zone Camper

- Posts: 1249
- Joined: Thu Feb 09, 2012 11:00 pm
- Location: Gloucester
Fair play that's where mine came from, well just up the road. Not too bad of a journey. H plate it post facelift unless im very much mistaken and I often am.alebongo wrote:ive got to go to west sussex,(mrs is not lookin foward to the road trip,) to pick the motor up,its a 320i se ,2dr on a H ,silver
Keep your eyes peeled for the old tin worm on it. That would be my advice to you mate.
-
alebongo
- E30 Zone Newbie

- Posts: 14
- Joined: Sat Apr 30, 2011 11:00 pm
-
alebongo
- E30 Zone Newbie

- Posts: 14
- Joined: Sat Apr 30, 2011 11:00 pm
this is my cover on face book just rightsuchy wrote:Yes! Wheels are a bit big for me and not my cup of tea but yes it sits and fits right.Rav335uk wrote:This is STANCED
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Looks the same height as mine dude and mine is standard
[/quote]
Parked on an angle
Il probably get coils this Xmas
This is sitting flat suchy, still look the same?

Parked on an angle
Il probably get coils this Xmas
This is sitting flat suchy, still look the same?

Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
scjimbo
- E30 Zone Camper

- Posts: 1249
- Joined: Thu Feb 09, 2012 11:00 pm
- Location: Gloucester
What tyres are those verde? They the good ol nan kang ditchfinders?verde wrote:steve_k wrote:On here stance ain't about stupid camber angles, scraping your sump everywhere you go it's about getting the car sitting properly over a set of period wheels.
have a look in the photo section & you'll see what I mean.
Thats exactly why i started sub low!
Stance doesnt mean a broken sump every 13 miles.
Id call my ride stanced but its not ridiculously slammed. This is a 60/60 drop with 9Js and front and rear 5mm spacers
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
That's just slammed. Stance is when it sits right and wheels fit right. The name has just been diluted to now mean pretty much any scrap that has been ghetto dropped alsoBATTS91 wrote:I class stanced as rediculously low and stoopid rear beg camber ! Personally i dont call mine stanced !
Done right and properly useable is the aim. Take springs out and run sh*t steels does not a stanced car make...
-
scjimbo
- E30 Zone Camper

- Posts: 1249
- Joined: Thu Feb 09, 2012 11:00 pm
- Location: Gloucester
verde wrote:Looks the same height as mine dude and mine is standard
Parked on an angle
Il probably get coils this Xmas
This is sitting flat suchy, still look the same?
[/quote]Fair play Verde I've never seen your motor like that. Good work!
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
verde wrote:Looks the same height as mine dude and mine is standard
Parked on an angle
Il probably get coils this Xmas
This is sitting flat suchy, still look the same?
[/quote]Is that really -60 on the front? I would've thought tyre/arch gap would've been smaller?
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Thanks jimbo...that was a while back, its got tinted windows and 5mm spacers on the back now
Well thats what I was told suchy but I was also told it was chipped...which it wasnt, and that it had no rust...which it had some.
Could anybody ellaborate on that? is it lowered 60 front by the looks of it? Its too high for my liking
Well thats what I was told suchy but I was also told it was chipped...which it wasnt, and that it had no rust...which it had some.
Could anybody ellaborate on that? is it lowered 60 front by the looks of it? Its too high for my liking
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
scjimbo
- E30 Zone Camper

- Posts: 1249
- Joined: Thu Feb 09, 2012 11:00 pm
- Location: Gloucester
I doubt it is 60 at the front mate, it only looks marginally lower than mine, and mines a real monster truck.
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
Don't they all!!! Rust that isverde wrote:Well thats what I was told suchy but I was also told it was chipped...which it wasnt, and that it had no rust...which it had some.
-
capnmchl
- E30 Zone Camper

- Posts: 1141
- Joined: Mon Feb 20, 2012 11:00 pm
- Location: Exeter, Devon
^ I got a 75/50 kit from FK. The front dropped about 40mm and the rear about 10mm. So I've learnt some springs don't do what they say.verde wrote:Thanks jimbo...that was a while back, its got tinted windows and 5mm spacers on the back now
Well thats what I was told suchy but I was also told it was chipped...which it wasnt, and that it had no rust...which it had some.
Could anybody ellaborate on that? is it lowered 60 front by the looks of it? Its too high for my liking
I would say your front is a bit lower than mine, so it's probably a 40-50mm drop, taking into account your A's are most likely 16 and you appear to be running a 215/45.? Your rear is a lot more low than mine though.
Mine just looks silly as a result
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Hmmm fuck knows. I wanted one of those FK kits aswell, they look the absolute tits
This was on that kit but its bagged now
I wonder if i should risk buying 60mm front springs or just get coils which i know will properly work..I want rake aswell, my rear is lowered like 70 +

This was on that kit but its bagged now
I wonder if i should risk buying 60mm front springs or just get coils which i know will properly work..I want rake aswell, my rear is lowered like 70 +

Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
BATTS91
- E30 Zone Squatter

- Posts: 1764
- Joined: Sat May 01, 2010 11:00 pm
- Location: clacton on sea essex
Thats cool euan ^^^
So who would class mine as "stanced" then ??

So who would class mine as "stanced" then ??

-
capnmchl
- E30 Zone Camper

- Posts: 1141
- Joined: Mon Feb 20, 2012 11:00 pm
- Location: Exeter, Devon
I just got one of the spring and shock sets. It was really cheap as new, but I can see why now.verde wrote:Hmmm **** knows. I wanted one of those FK kits aswell, they look the absolute tits
This was on that kit but its bagged now
I wonder if i should risk buying 60mm front springs or just get coils which i know will properly work..I want rake aswell, my rear is lowered like 70 +
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
hahaha the way you worded that is like you just slammed down your pint and stood up in the pub like " OIIIIII!!!.....which one of you bastards called my ride stanced...."
Yeah no wonder man.,..il just buy coils
Yeah no wonder man.,..il just buy coils
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
Personally I'd just call it slammed as it's too low in the rear to be 'stanced'...BATTS91 wrote:Thats cool euan ^^^
So who would class mine as "stanced" then ??
-
BATTS91
- E30 Zone Squatter

- Posts: 1764
- Joined: Sat May 01, 2010 11:00 pm
- Location: clacton on sea essex
Tops
front needs to go a tad lower , i shall be doing that when my back pain gives me a break seeming as my road has finally been surfaced , thinking A set of dare rs :p
-
Blitz
- Married to the E30 Zone

- Posts: 11151
- Joined: Mon Jan 30, 2006 11:00 pm
- Location: East London+Basildon
-
steve_k
- E30 Zone Team Member

- Posts: 8044
- Joined: Fri May 23, 2008 11:00 pm
- Location: in the vale of mansfield
Thats how my sport look's/sit's, just a little bit higher at the front (shame it ain't got the same lump under the bonnetRav335uk wrote:This is STANCED
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
-
Gert_8
- Married to the E30 Zone

- Posts: 11302
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
That's nice. I can live with that.steve_k wrote:Thats how my sport look's/sit's, just a little bit higher at the front (shame it ain't got the same lump under the bonnetRav335uk wrote:This is STANCED
)

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
Easy to get this look- drop an M30 lump in on standard set up and hey-prestosteve_k wrote:Thats how my sport look's/sit's, just a little bit higher at the front (shame it ain't got the same lump under the bonnetRav335uk wrote:This is STANCED
)
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Lol.

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
Oh yeah laughing now aren't you! You've been through the pain of finding suspension to withstand the tonnage!Rav335uk wrote:Lol.
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Rav335uk wrote:This is STANCED
That is retarded and unusable, as soon as you go round a corner the arches will skin the tyres, as soon as you put something in the boot or have a couple of passengers the arches will skin the tyres, unless your building a car purely to take pictures of it its just plain retarded.
IMO as soon as an arch touches a tyre you need one of these -

-
steve_k
- E30 Zone Team Member

- Posts: 8044
- Joined: Fri May 23, 2008 11:00 pm
- Location: in the vale of mansfield
@danthe, I have no probs with tyres touching the arch lip while cornering as the fron on mine is raised a enough to clear it.
as for the back end?? No probs with two folk on the back seat & a full boot & still no scaping. It's sll about getting it just "right".
@suchy. That blue "sport" IIRC has an M60 under the bonnet (still lighter than an M30 anchor though lol).
as for the back end?? No probs with two folk on the back seat & a full boot & still no scaping. It's sll about getting it just "right".
@suchy. That blue "sport" IIRC has an M60 under the bonnet (still lighter than an M30 anchor though lol).
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
I can't think of an car engine that is heavier than an M30?steve_k wrote:@suchy. That blue "sport" IIRC has an M60 under the bonnet (still lighter than an M30 anchor though lol).
For those kids out there who don't know what we're talking about, here is an M30 engine;

And this is Rav's mechanic experimenting on French scrap trying to get the spring rates correct before fitting to Rav's tug. He had to install vents in the bonnet because of some minor clearance issues;
[

And here is a rare archive picture from BMW of a brand new M30 being delivered to it's factory;

-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
suchy wrote:I can't think of an car engine that is heavier than an M30?steve_k wrote:@suchy. That blue "sport" IIRC has an M60 under the bonnet (still lighter than an M30 anchor though lol).
For those kids out there who don't know what we're talking about, here is an M30 engine;
And this is Rav's mechanic experimenting on French scrap trying to get the spring rates correct before fitting to Rav's tug. He had to install vents in the bonnet because of some minor clearance issues;
ha ha ha that made me laugh
[
And here is a rare archive picture from BMW of a brand new M30 being delivered to it's factory;
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Epic donks suchy

Definitely, its a thin line between normality and facial tattoo typessteve_k wrote:@danthe, I have no probs with tyres touching the arch lip while cornering as the fron on mine is raised a enough to clear it.
as for the back end?? No probs with two folk on the back seat & a full boot & still no scaping. It's sll about getting it just "right".
-
Gert_8
- Married to the E30 Zone

- Posts: 11302
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
That + Rav's weight = I'm surprised the thing moves at all!suchy wrote:I can't think of an car engine that is heavier than an M30?steve_k wrote:@suchy. That blue "sport" IIRC has an M60 under the bonnet (still lighter than an M30 anchor though lol).
For those kids out there who don't know what we're talking about, here is an M30 engine;
And this is Rav's mechanic experimenting on French scrap trying to get the spring rates correct before fitting to Rav's tug. He had to install vents in the bonnet because of some minor clearance issues;
]

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
Yeah but it's all about the torque with an M30. Not built with speed in mind, but it will tow an office blockGert_8 wrote: That + Rav's weight = I'm surprised the thing moves at all!![]()
-
Gert_8
- Married to the E30 Zone

- Posts: 11302
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
Ah, now it all makes sense!suchy wrote:Yeah but it's all about the torque with an M30. Not built with speed in mind, but it will tow an office blockGert_8 wrote: That + Rav's weight = I'm surprised the thing moves at all!![]()

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
Praise BMW Archive Dept. I just posted their pictures (oh and one from Rav's build thread)DanThe wrote:Epic donks suchy![]()
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
This is a Russian tractor unit that was fitted with an M30 also, you get more of a feel for it's torque;
[youtube][/youtube]
[youtube][/youtube]





