retrim dilemma
Moderator: martauto
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet
I have a pair of recaro "highbacks" in houndstooth that I want to get retrimmed in the anthracite that I already have in my car. The cloth from a saloon rear seat will just about cover the base and back of the recaros but there's no plain grey large enough for the bolsters and head rests. Is there any other model BMW that has some plain grey large enough to cover these parts?
-
snakebrain
- E30 Zone Addict

- Posts: 3683
- Joined: Tue Aug 11, 2009 11:00 pm
E23 comfort seats maybe? daimlerman has some experience of this kind of drama - he might be the man to talk to..
-
maggspower
- Turbo Farmer Tractor Driver
- Posts: 2376
- Joined: Wed Oct 12, 2005 11:00 pm
- Location: Nowhere near South Wales, ok butt
I have almost the exact same problem. It seems as though the recaros have the largest bolsters of all the seats
A good trimmer may have a very good match of the fabric, but I understand if that is not good enough, however you could have the back seats retrimmed to match.
I have looked into using sport bolsters, they are not big enough but any join could possibly be hidden behind the seat squab, you would have to use the corresponding bolster for each one.
Or as above find another model with larger doner bolsters
Sorry for not being more help.
PMed

A good trimmer may have a very good match of the fabric, but I understand if that is not good enough, however you could have the back seats retrimmed to match.
I have looked into using sport bolsters, they are not big enough but any join could possibly be hidden behind the seat squab, you would have to use the corresponding bolster for each one.
Or as above find another model with larger doner bolsters
Sorry for not being more help.
PMed
-
bab-91
- Married to the E30 Zone

- Posts: 7174
- Joined: Thu Jan 06, 2011 11:00 pm
- Location: Northern Ireland
BLASPHEMY!!Cloggy Saint wrote:I have a pair of recaro "highbacks" in houndstooth that I want to get retrimmed in the anthracite
-
toby
- E30 Zone Addict

- Posts: 3609
- Joined: Thu Aug 11, 2005 11:00 pm
- Location: Kent
(I'm just going to raise a few questions and do a search for you because I'm sure this cloth would be available.)
Isn't the cloth available on a roll from somewhere? It wouldn't be a good investment to recover seats in old cloth which wasn't particularly durable in the first place. It won't last as long as you want.
Is the houndstooth in bad condition? Could you go the other way and replace the rear seats with houndstooth?
Isn't the cloth available on a roll from somewhere? It wouldn't be a good investment to recover seats in old cloth which wasn't particularly durable in the first place. It won't last as long as you want.
Is the houndstooth in bad condition? Could you go the other way and replace the rear seats with houndstooth?

-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
is there anywhere to get houndstooth from on the roll ? id like to get some to keep for the future
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
Tourings never came with houndstooth so he couldn't source any and it'd just look wrong.toby wrote: Is the houndstooth in bad condition? Could you go the other way and replace the rear seats with houndstooth?
The houndstooth Recaro material will have good value if it's in good condition!
-
toby
- E30 Zone Addict

- Posts: 3609
- Joined: Thu Aug 11, 2005 11:00 pm
- Location: Kent

-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
BMW, but pretty sure it's NLA now. Although there was a guy at one point in the USA who could make any pattern. Rav is probably best to ask about that though.polsta wrote:is there anywhere to get houndstooth from on the roll ? id like to get some to keep for the future
-
bab-91
- Married to the E30 Zone

- Posts: 7174
- Joined: Thu Jan 06, 2011 11:00 pm
- Location: Northern Ireland
I was considering re trimming my houndstooth seats

The Internet - It has proven to be worthless, and is nothing but a repository for perverts.
IG - bab91
IG - bab91
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
come on rav where are yaKedge wrote:BMW, but pretty sure it's NLA now. Although there was a guy at one point in the USA who could make any pattern. Rav is probably best to ask about that though.polsta wrote:is there anywhere to get houndstooth from on the roll ? id like to get some to keep for the future
maybe we could do a zone bulk buy and buy a whole roll or get one made and all club in
-
bab-91
- Married to the E30 Zone

- Posts: 7174
- Joined: Thu Jan 06, 2011 11:00 pm
- Location: Northern Ireland
I would definitely be interested in this!polsta wrote:come on rav where are yaKedge wrote:BMW, but pretty sure it's NLA now. Although there was a guy at one point in the USA who could make any pattern. Rav is probably best to ask about that though.polsta wrote:is there anywhere to get houndstooth from on the roll ? id like to get some to keep for the future
maybe we could do a zone bulk buy and buy a whole roll or get one made and all club in
-
capri_rob
- Married to the E30 Zone

- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
My trimmer used the plain grey from the rear touring side-squabs and a scrap comfort seat to retrim one of my sport seat bolsters - still had to put a small join in it though 

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
Ed, try these they are in your neck of the woods (so to speak)
http://www.westtrading.nl/overzicht.asp ... anguage=UK
ferg
(if it turns out all good, let me know as I would still like to buy some 0150 anthracite cloth which it appears these guys do)
http://www.westtrading.nl/overzicht.asp ... anguage=UK
ferg
(if it turns out all good, let me know as I would still like to buy some 0150 anthracite cloth which it appears these guys do)
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
Cloggy Saint
- Old Skooler

- Posts: 8027
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: zummerzet


