PN needed

Post Mon Sep 17, 2012 9:22 am

Anyone know the Part Number for the throttle body rubber inlet boot for the M20B25 engine (later version for the T shaped idle control valve)?

Cheers

Post Mon Sep 17, 2012 1:04 pm

You should learn to use realoem or bmwfans, all part no's are there

Is this what your looking for? http://bmwfans.info/parts/catalog/E30/2 ... ow_sensor/

Post Mon Sep 17, 2012 1:31 pm

Note that you can't determine if it's the hose you require by looking at the illustration. There's a good chance that the same picture is used for the 'L' boot, the 'T' boot and the version that doesn't have a second stub for the brake servo.

Post Sat Sep 22, 2012 9:51 am

Brianmoooore wrote:Note that you can't determine if it's the hose you require by looking at the illustration. There's a good chance that the same picture is used for the 'L' boot, the 'T' boot and the version that doesn't have a second stub for the brake servo.

Exactly the point Brianmoooore - hence on this occassion realoem is not as useful as it usually is...

Post Sat Sep 22, 2012 11:53 am

A good way to check is to find the p/n on RealOEM and then stick that into Google Images. That'll show you whether the boot has the correct elbow or not.