m52 water level

Moderator: martauto

shedrool83
Old Skooler
Old Skooler
Posts: 4395
Joined: Thu May 10, 2007 11:00 pm
Location: Dundee Scotland

Post Tue Sep 11, 2012 6:55 am

Think i have a leak on the coolant system some where.
The water level in me e36 328 rad drops around 100ml after a while(from full to the brim) which stops my fan kicking in.

Will check the heater matrix pipes the next time i'm at the garage as cant see water anywhere else .

But just wondering where does the water level sit in yours?
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49359
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Sep 11, 2012 9:43 am

How do you know what the level is in the rad? You can only see into the bottle, and about 100mm down there sounds reasonable.
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue Sep 11, 2012 9:48 am

Shouldnt be filled to the top mate, if it is then the coolant will come out of the cap.
There is a level indicator on the side of the tank
Heater valve is the most common leak
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49359
Joined: Mon Jan 10, 2005 11:00 pm

Post Tue Sep 11, 2012 9:58 am

DanThe wrote: There is a level indicator on the side of the tank
I wouldn't even rely on that when the radiator is fitted in a car other than the one BMW intended.
As long as there's a reasonable depth of coolant in the bottle, and the level stays constant over a period of weeks, then there's not a lot to worry about.
shedrool83
Old Skooler
Old Skooler
Posts: 4395
Joined: Thu May 10, 2007 11:00 pm
Location: Dundee Scotland

Post Tue Sep 11, 2012 4:25 pm

May problem is the fan doesnt kick in when its meant to unless the bottle on the side of the rad is pratically full.
Image
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue Sep 11, 2012 6:26 pm

Sounds like a problem with the cap, or the bleed screw on top of the rad, take it out and check the rubber O ring is still intact, otherwise try a different cap
shedrool83
Old Skooler
Old Skooler
Posts: 4395
Joined: Thu May 10, 2007 11:00 pm
Location: Dundee Scotland

Post Wed Sep 12, 2012 7:04 am

I'll have a look Dan.
Image