refurb the front grill??..

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

kangman
E30 Zone Squatter
E30 Zone Squatter
Posts: 1935
Joined: Mon May 24, 2010 11:00 pm
Location: Heathrow

Post Sat Sep 08, 2012 8:26 pm

My grills are grey rather then black..
can i fix this by using something? or painting it? or do i jus have to replace it
User avatar
bigredbmw
Zone Supporter
Posts: 1197
Joined: Tue Aug 05, 2008 11:00 pm
Location: newcastle upon tyne , howdon

Post Sat Sep 08, 2012 8:30 pm

you could take them off and paint them .....
Image
FinalD
E30 Zone Camper
E30 Zone Camper
Posts: 1098
Joined: Wed Apr 25, 2012 11:00 pm
Location: Bristol

Post Sat Sep 08, 2012 8:30 pm

Mine are the same faded grey rubbish. On some spares I had (badly painted by someone else) I tried some AutoGlym dye but it is far too shiny so I'm thinking of testing out a can of Plasti-Kote in a satin or something finish. Will require gentle sanding prep I expect but don't really see the point in buying some new ones/someone else's.
maggspower
Turbo Farmer Tractor Driver
Posts: 2376
Joined: Wed Oct 12, 2005 11:00 pm
Location: Nowhere near South Wales, ok butt

Post Sat Sep 08, 2012 8:35 pm

Heat gun. Be careful :D
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Sep 08, 2012 8:45 pm

Bear in mind that the things are 20+ years old....a rattle can of satin black can make a difference,but it is best started with a gentle rub down and a plastic primer coat.
Youth is wasted on the young.
Green
E30 Zone Squatter
E30 Zone Squatter
Posts: 1698
Joined: Wed Mar 17, 2010 11:00 pm
Location: Santa Pod

Post Sat Sep 08, 2012 9:18 pm

I used a plastic trim paint similar to this

http://www.ebay.co.uk/itm/Bumper-trim-B ... 816wt_1037

I just scotch padded them down with warm soapy water then sprayed them

I did the same with the plastic bumper trims which bought them up brilliantly.
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Sep 08, 2012 10:47 pm

maggspower wrote:Heat gun. Be careful :D
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sat Sep 08, 2012 10:53 pm

Painting plastic trim never looks right, especially when it starts to flake off
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Sat Sep 08, 2012 10:54 pm

DanThe wrote:Painting plastic trim never looks right, especially when it starts to flake off

Only when it's not done right, otherwise it's fine. :D
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Sat Sep 08, 2012 11:00 pm

Ive found this stuff works well.

Image

Painting them looks great but give it 12 months and they can look tatty.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sat Sep 08, 2012 11:09 pm

Rav335uk wrote:
DanThe wrote:Painting plastic trim never looks right, especially when it starts to flake off

Only when it's not done right, otherwise it's fine. :D
That narrows it down to 1% then :)
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Sat Sep 08, 2012 11:10 pm

Buy back to.black. Im.gunna hit my shadow line tomorrow aswell as grilles I think
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
zaust
Zone day release
Posts: 13007
Joined: Sun Jan 09, 2005 11:00 pm
Location: Somewhere in Hertfordshire , or press Ctrl + W

Post Sun Sep 09, 2012 9:09 am

verde wrote:Buy back to.black. Im.gunna hit my shadow line tomorrow aswell as grilles I think
no no no, your shadow line round the windows use a mild polishing compound and the plastic trim as above use a heat gun.
M30 Tech 1 Touring on gas.
Image
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Sun Sep 09, 2012 9:44 am

zaust wrote:
verde wrote:Buy back to.black. Im.gunna hit my shadow line tomorrow aswell as grilles I think
no no no, your shadow line round the windows use a mild polishing compound and the plastic trim as above use a heat gun.
What polish would you suggest
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
zaust
Zone day release
Posts: 13007
Joined: Sun Jan 09, 2005 11:00 pm
Location: Somewhere in Hertfordshire , or press Ctrl + W

Post Sun Sep 09, 2012 10:10 am

I use evo or g3 mild. But any will do as long as its mild.
M30 Tech 1 Touring on gas.
Image
BATTS91
E30 Zone Squatter
E30 Zone Squatter
Posts: 1764
Joined: Sat May 01, 2010 11:00 pm
Location: clacton on sea essex

Post Sun Sep 09, 2012 10:21 am

So how would using a heat gun bring the colour back ?? How about a hairdryer lol hot enough ??
zaust
Zone day release
Posts: 13007
Joined: Sun Jan 09, 2005 11:00 pm
Location: Somewhere in Hertfordshire , or press Ctrl + W

Post Sun Sep 09, 2012 10:43 am

The heat brings the oil in the plastic back to the surface. And no a hair dryer won't do it lol.
M30 Tech 1 Touring on gas.
Image
User avatar
greg124
E30 Zone Regular
E30 Zone Regular
Posts: 668
Joined: Tue Apr 03, 2007 11:00 pm
Location: In the pub

Post Sun Sep 09, 2012 11:12 am

I use silicon oil on all the black plastic bits. Just smear it on and buff.
Looks good for about 6 months before it needs doing again
Schadenfreude - the German's haven't got a word for that.
BATTS91
E30 Zone Squatter
E30 Zone Squatter
Posts: 1764
Joined: Sat May 01, 2010 11:00 pm
Location: clacton on sea essex

Post Sun Sep 09, 2012 11:29 am

Ahhhh i gots ya now, see ive used fresh engine oil on a rag before and it lasts a good few month
TPS
E30 Zone Team Member
E30 Zone Team Member
Posts: 13119
Joined: Fri Mar 06, 2009 11:00 pm
Location: Hampshire

Post Sun Sep 09, 2012 11:32 am

Peanut Butter
Image
1991 325i Touring Alpine White II
1994 318i Touring Sterling Silver
fearlessphil
E30 Zone Newbie
E30 Zone Newbie
Posts: 190
Joined: Mon Jun 25, 2012 11:00 pm

Post Sun Sep 09, 2012 12:37 pm

just about to say peanut butter works a treat!!
TPS
E30 Zone Team Member
E30 Zone Team Member
Posts: 13119
Joined: Fri Mar 06, 2009 11:00 pm
Location: Hampshire

Post Sun Sep 09, 2012 1:48 pm

Make sure you use the Smooth stuff, not the Crunchy variety, makes a great sandwich filler as well!
Image
1991 325i Touring Alpine White II
1994 318i Touring Sterling Silver
User avatar
Jozi
E30 Zone Addict
E30 Zone Addict
Posts: 3076
Joined: Thu Nov 22, 2007 11:00 pm
Location: Dublin, Ireland

Post Sun Sep 09, 2012 1:55 pm

Don't go near silicone based products if you have a respray coming up, your painter wont thank you for it.

I used a permanent trim restorer called Gtechniq C4

The difference is quite noticeable:
Image

I was going to repaint my shadowline until I thought of going over it with the polishing machine, good to read it can be done.
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Sun Sep 09, 2012 6:35 pm

jozi hows it looks weeks/months later ? does it fade again ?

theres also that other stuff which is ment to be the business ,called forever black

ive repainted scutte grills before, sand,plastic prime, light sand, few coats of satin, looked great and no flaking after a few months
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Sep 09, 2012 6:46 pm

Forget the 'forever black', peanut butter, paint, and any other assorted snake oils. You've been told how the professionals do it, and that's with a heat gun. Practice first though, as the margin between 'restored to black' and ' molten mess' isn't that great, although great enough.
User avatar
Jozi
E30 Zone Addict
E30 Zone Addict
Posts: 3076
Joined: Thu Nov 22, 2007 11:00 pm
Location: Dublin, Ireland

Post Sun Sep 09, 2012 7:53 pm

I've no idea how long it last, I've no E30 to try it on. It's non destructive, if it doesn't last trying it with heat might be the next option
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Sun Sep 09, 2012 8:53 pm

ive tried a heat gun, personly i thought it was rubbish, although only a 1st stab at it, its not easy and on things like grills with lots of nooks and crannies its even harder

how much is a brand new grill from bmw ?