Trying to convince myself that it could be made to look nice, but i'm just not a fan of Zinnober Red
4dr Zinnober Chromie Pictures?
Moderator: martauto
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
Anyone got any nice 4 door Zinnober chromie pictures so I can see them looking nice?
Trying to convince myself that it could be made to look nice, but i'm just not a fan of Zinnober Red
Trying to convince myself that it could be made to look nice, but i'm just not a fan of Zinnober Red
-
snakebrain
- E30 Zone Addict

- Posts: 3683
- Joined: Tue Aug 11, 2009 11:00 pm
-
petchy
- E30 Zone Regular

- Posts: 394
- Joined: Sat Mar 04, 2006 11:00 pm
- Location: South Shields
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
Still can't get it to fire
It's turning and trying, getting fuel, albeit crap and old from another tank, so will try adding some fresh in. The ht leads seem extremely tight when removing and plugging in so need to check they are actually plugging in properly later on. Cleaned the dizzy and rotor arm too but still nothing.
It literally sounds like its about to fire constantly.
Kieran, was that your 4 door? I like the rear mud flaps, I did that with my chromie and think it looks great with just the back so will probably replicate it.
It did think of getting some different wheels but not sure? Maybe paint some bbs gold with a shinny lip?
It's turning and trying, getting fuel, albeit crap and old from another tank, so will try adding some fresh in. The ht leads seem extremely tight when removing and plugging in so need to check they are actually plugging in properly later on. Cleaned the dizzy and rotor arm too but still nothing.
It literally sounds like its about to fire constantly.
Kieran, was that your 4 door? I like the rear mud flaps, I did that with my chromie and think it looks great with just the back so will probably replicate it.
It did think of getting some different wheels but not sure? Maybe paint some bbs gold with a shinny lip?
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
re. your non starting - take the transmission inspection plate off and shine a torch in the bellhousing of the gearbox to see if the little metal pick up for the flywheel sensors has broken off. If it has, you need to replace the flywheel or convert to Motoronic 1.3 if you don't fancy removing the gearbox.
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
Hartges do suit them quite well
@ Theo -
Havent had a chance to get out and play with it yet, ned to go into the unit today though so I can get some pictures of some frag to go on here so hopefully once I finish that I can have a play around again
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
If it was the pulse sensor activator, the engine would not even try to fire, it would simply crank and there would be no fuel or spark.
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
I need to check the spark properly as didnt yesterday.
I was running through the troubleshoot on the Wiki and going through the list. I asked my friend to listen to see if he could here the fuel pump so I thought it might have been that. Faffed about for ages switching it over (External one) and turns out it was working
Which wasted alot of the time which I had spare to play.
I was running through the troubleshoot on the Wiki and going through the list. I asked my friend to listen to see if he could here the fuel pump so I thought it might have been that. Faffed about for ages switching it over (External one) and turns out it was working
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Just make sure its not jumped a tooth on the timing belt due to a collapsed deflection pulley or backfire, one tooth out can cause the "trying to start" symptoms.
But equally it could be sticky injectors or a water damaged ECU.
But equally it could be sticky injectors or a water damaged ECU.
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
Its been sitting for 2 years atleast without being run. Last time it was on the road was in 2002. I'm hoping its something that doesnt cost me to put right, as in, if its the belt out a tooth then it will cost me money in replacing the fluids etc
(Tight baaarstard)
With the injectors, would removing them and soaking/cleaning them sort the issue out enough to see if its them?
With the injectors, would removing them and soaking/cleaning them sort the issue out enough to see if its them?
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
If you take the injectors out, you can soak them in WD40 (after taking the rubber o-rings off) then apply 12v across the terminals and squirt brake/carb cleaner down them. This is a get you out of jail route and it would be best to get them cleaned or replaced.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
What condition are the spark plugs? Smokey on any of them?
How much fuel in the tank? 5 litres won't be enough.
Any air leaks? If it's been sat for 10 years I'd expect a lot of the rubber to be perished by now.
Have you tried new fuel and air filters, to make sure they're not strangling it somehow? A mouse nest in the intake would have a negative effect on starting
How much fuel in the tank? 5 litres won't be enough.
Any air leaks? If it's been sat for 10 years I'd expect a lot of the rubber to be perished by now.
Have you tried new fuel and air filters, to make sure they're not strangling it somehow? A mouse nest in the intake would have a negative effect on starting
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Its a rough non running 4 door Jim, you know what you need to do !


-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
I know full wellpacerpete wrote:Its a rough non running 4 door Jim, you know what you need to do !![]()
But if it does make it back onto the road, I doubt it will be for very long as it does have some holes in the drivers rear arch
Sparks where blacked up, wire brushed them up...What condition are the spark plugs? Smokey on any of them?
How much fuel in the tank? 5 litres won't be enough.
Any air leaks? If it's been sat for 10 years I'd expect a lot of the rubber to be perished by now.
Have you tried new fuel and air filters, to make sure they're not strangling it somehow? A mouse nest in the intake would have a negative effect on starting
Fuel, I need to add some more still
Air leaks, I've had a quick check but need to go into more detail
Fuel filter, no, not yet and air filter, I havent even checked over
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Jim , in the time you spend faffing about you could have the cooont fragged , the glove box plastics super minted and the whole shooting match on the bay
Even if / when you get it running, it will still be a rotten beat up foooked quattroporte with zero chance of being road worthy and obtaining a MOT
Even if / when you get it running, it will still be a rotten beat up foooked quattroporte with zero chance of being road worthy and obtaining a MOT
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Did you hear this B7?pacerpete wrote:Even if / when you get it running, it will still be a rotten beat up foooked quattroporte with zero chance of being road worthy and obtaining a MOT
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Demlotcrew wrote:Did you hear this B7?pacerpete wrote:Even if / when you get it running, it will still be a rotten beat up foooked quattroporte with zero chance of being road worthy and obtaining a MOT
Even angry Trevor would have to begrudgingly admit that the future of this sorry turd is spreadsheet shaped !
-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
The automotive industry should make a massive collaboration to completely outlaw painted cars red....
ALL red cars look vile..! Argh!
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
All very valid points Petepacerpete wrote:Jim , in the time you spend faffing about you could have the cooont fragged , the glove box plastics super minted and the whole shooting match on the bay![]()
Even if / when you get it running, it will still be a rotten beat up foooked quattroporte with zero chance of being road worthy and obtaining a MOT
Still want to get it started though
-
petchy
- E30 Zone Regular

- Posts: 394
- Joined: Sat Mar 04, 2006 11:00 pm
- Location: South Shields
-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
Thats true 
Ideally I'll find another coupe chromie with a 325i auto fitted without any rust, but no joy so far... Still trying to convince myself to keep this El Turdio, but its red and I dont like 4 doors too much
Ideally I'll find another coupe chromie with a 325i auto fitted without any rust, but no joy so far... Still trying to convince myself to keep this El Turdio, but its red and I dont like 4 doors too much
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Is it ready yet Jim ?


-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
pacerpete wrote:Is it ready yet Jim ?![]()







