Right, I think I know the answer to this but I'll ask anyway, Over the last year I've built an M50 vanos E30 Convertible but I'm now thinking of getting an E36 Convertible so the old 30's got to go. The Spec is Shell ”“ Rear arches original and vgc ( incl inners ) as is door shut area/ lower rear qtrs etc. Had welded repair to scuttle and rear wing by ariel in 2005 and no bubbles have returned, also jacking points and small bulkhead repair ( though all good round the grommet ) whilst engine bay was stripped ( totally, incl all soundproofing , wiring etc ) for repaint ( last year ) prior to engine conversion ( photos available). Overall a great solid shell but could really do with paint now to be a real looker.
Interior- Orig Beige leather, regularly fed with Gliptone products creased but no splits in bolster or rear seat and all tilt mechs etc work, good beige carpets all in very nice indeed only non std is seat badges and light up gear knob, Pioneer stereo with Infinity component speakers in original locations. Tech 2 ( small vers) steering wheel, 6 button obc
Hood,- V very good Blue hood, couple of rub marks where horse shoe hinges touch but no holes rips repairs or leaks.
Brakes / Suspension - Mazda rx7 4 pot/ Corrado G60 disc conversion with All solid brake lines renewed and Goodrich Flexi’s throughout. Fully polybushed and running Apex rear shocks / springs at rear and Apex springs with Spax ( new last yr ) inserts in 51mm struts at the front. Wheels are 17in Alpina Reps ( with 10mm ) spacers at front to clear Calipers.
Z3 2.8 thorsen LSD ( 3.15 Ratio so not a screamer ) / E36 ZF Box with v tight Quickshift & M50 Single Vanos engine ( New clutch when fitted along with master/ slave cyls replaced)
Full Headlamp WW / intensive wash & heated jets. The main downside is that the exhaust downpipes were made up by a mate to attach to my Scorpion exhaust and are rattly and a bit leaky but at least the 328i modded manifolds are ok.
Also have Full Genuine Mtech 2 kit (not fitted ) and a Weissman Hardtop in Swartz.
I'd guess that the only way to get a decent return on this turd is to frag it as there seems to be little market for complete cars at the moment - What do you think Break or try and sell complete?
I have garage space so breaking is possible - does anyone have any idea what it would break for moneywise ?
Many Thanks
http://imageshack.us/photo/my-images/71 ... whole.jpg/
http://imageshack.us/photo/my-images/25 ... idfit.jpg/
http://imageshack.us/photo/my-images/4/ ... itted.jpg/
To Sell or to Break ?
Moderator: martauto
-
Ianb
- E30 Zone Regular

- Posts: 517
- Joined: Sun Feb 14, 2010 11:00 pm
Last edited by Ianb on Fri Aug 31, 2012 4:31 pm, edited 2 times in total.
-
Mo13
- E30 Zone Regular

- Posts: 722
- Joined: Tue Apr 03, 2012 11:00 pm
- Location: East London
Id like to see pictures of both the car and the engine conversion....
As for selling it depends on what you want for it
As for fragging it depends on how long you are willing to wait for the money to accumulate
PS how much are you looking for it whole?
As for selling it depends on what you want for it
As for fragging it depends on how long you are willing to wait for the money to accumulate
PS how much are you looking for it whole?
-
Mo13
- E30 Zone Regular

- Posts: 722
- Joined: Tue Apr 03, 2012 11:00 pm
- Location: East London
May also be interested in the tech 2 and hardtop 
