Restoration painting or anodising
Moderator: martauto
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
Ive found a local company that is going to dip then re finish all the fittings from my car-nuts,bolts,screws,brackets etc, il get some sort of rust proof finish hopefully and they have said theyl come back like new
but im also thinking- the fuel lines cover inside rear arch, head lamp holder unit things, and the head lamp rings- do you think they would benefit from the same process ? rather than blasting and painting, dipped then then some sort of smooth black anodised rust proof finish for the fuel cover and head lamp unit, then some sort of silver/chrome finish for the rings ?
when brand new were the head lamp rings a silver painted or a chrome finish ?
but im also thinking- the fuel lines cover inside rear arch, head lamp holder unit things, and the head lamp rings- do you think they would benefit from the same process ? rather than blasting and painting, dipped then then some sort of smooth black anodised rust proof finish for the fuel cover and head lamp unit, then some sort of silver/chrome finish for the rings ?
when brand new were the head lamp rings a silver painted or a chrome finish ?
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Head lamp rings are not expensive, they come with a powder/plastic coating and generally last very well.
When you say 'dip' what do you mean exactly? If its just an acid cleaning dip you wont get the results you would from sandblasting, more so if any parts have rust on them. Anodising and chrome plating is a much more expensive process and the prep work is what costs
When you say 'dip' what do you mean exactly? If its just an acid cleaning dip you wont get the results you would from sandblasting, more so if any parts have rust on them. Anodising and chrome plating is a much more expensive process and the prep work is what costs
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
Doesn't an anodised coating scratch off fairly easily as well?
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
i dont think so kedge, its just finishing metal and all sorts of coats can be done,i presume some more durable/rust proof etc than others
basicly- i went to a fittings place today with a load in a box, he looked at them and said they are not too bad and would be expensive to replace them all, most anyway they do not have as are a bmw custom fitting part, and that he has just restored a daimler himself and used these guys for his old fittings, he pointed me in the direction of them, said they will dip them to remove the crap and re finsh them and theyl come back like new, they charge by weight and estimated a £10/15 cost for the lot
http://www.macrodevelopments.co.uk/
, the other parts that are painted i mentioned, was just an idea on top of that , ie instead of blasting and powder coating the filler neck and head lamp unit, if they could dip and anodise them in a similar durable finish ?
basicly- i went to a fittings place today with a load in a box, he looked at them and said they are not too bad and would be expensive to replace them all, most anyway they do not have as are a bmw custom fitting part, and that he has just restored a daimler himself and used these guys for his old fittings, he pointed me in the direction of them, said they will dip them to remove the crap and re finsh them and theyl come back like new, they charge by weight and estimated a £10/15 cost for the lot
http://www.macrodevelopments.co.uk/
, the other parts that are painted i mentioned, was just an idea on top of that , ie instead of blasting and powder coating the filler neck and head lamp unit, if they could dip and anodise them in a similar durable finish ?
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Looks like a proper company, as long as they do a proper rust removal process before any coatings are applied you wont have a problem, you need to be careful though as a lot of places will just dunk them in a quick cleaning acid and the coatings wont stick properly, they will flake and rust through again after the first winter
-
snakebrain
- E30 Zone Addict

- Posts: 3683
- Joined: Tue Aug 11, 2009 11:00 pm
Anodising does wear off, especially if it's on a surface that will experience friction with another surface. Ask anyone who owns a 5 year old Maglite..
It's best used on aluminium. I'm not even sure that you can anodise steel?
It's best used on aluminium. I'm not even sure that you can anodise steel?
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
i have no idea hence the thread, but read the different finishes they do, and have pictures of screws and bolts there, so im sure they would have something suitable
the 65 odd year old fella who told me to go there, was i presume the owner of this shop, so he must know what he is on about look what they specialise in
http://www.cpfastenings.co.uk/
the 65 odd year old fella who told me to go there, was i presume the owner of this shop, so he must know what he is on about look what they specialise in
http://www.cpfastenings.co.uk/
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
all these sort of bits is what i want done, so its either that or new from bmw


-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
i think they were £20 odd each plus vat when i enquired last year- not cheap really when its nearing a ton !DanThe wrote:Head lamp rings are not expensive, they come with a powder/plastic coating and generally last very well.
s
i have a spre set here anyway, dependign on price and i take the fittings to the above place, i might just take a set and ask what they can do if they can get a real durable finish and maybe something chrome looking ?
-
goosiegander
- Zonegoose
- Posts: 2544
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: East Anglia
Google aerocoat, they do chrome in a can for the rings, generally wheel refinishers and based in Norfolk, website is well worth a look,

-
Rich320I
- E30 Zone Camper

- Posts: 1272
- Joined: Tue Dec 06, 2011 11:00 pm
- Location: Worcester
is it not possible polsta, to derust those bits using the method Brian Moore detailed on here (electrolosis) and then get them coated. at least youd know the derusting had been carried out then.
-
snakebrain
- E30 Zone Addict

- Posts: 3683
- Joined: Tue Aug 11, 2009 11:00 pm
http://www.bmminiparts.com/Search.aspxpolsta wrote:all these sort of bits is what i want done, so its either that or new from bmw
Loads on here..
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
isnt that what that company would do ? look at their website,im sure they would do that ?Rich320I wrote:is it not possible polsta, to derust those bits using the method Brian Moore detailed on here (electrolosis) and then get them coated. at least youd know the derusting had been carried out then.
-
Rich320I
- E30 Zone Camper

- Posts: 1272
- Joined: Tue Dec 06, 2011 11:00 pm
- Location: Worcester
yeah mate looks like thats the process they undertake,
i was just thinking out loud, as others have mentioned if theres any rust left then it will soon come through the new coating.
and im abit tight fisted so was thinking it may be cheaper to do it yourself mate
i was just thinking out loud, as others have mentioned if theres any rust left then it will soon come through the new coating.
and im abit tight fisted so was thinking it may be cheaper to do it yourself mate
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
well look at the website cpfasteners and what they sell, the chap in there looked at mine, told me to take them there theyl bring them up like new and charge £10/15 for the lot , surely hel know what hes on about as he sells fittings himself and mentioned the daimler, he also even knew things (if true or not useless fact of the day ?) that bmw made all fittings themself in germany until 1988 and afterwards they were produced in various countries all over the world, i think also some of these fittings are nla like the rear bumper rubber trimm clips for pre facelift ?
-
Rich320I
- E30 Zone Camper

- Posts: 1272
- Joined: Tue Dec 06, 2011 11:00 pm
- Location: Worcester
ha even im not that tight, i thought it would be alot more £ to get them dipped and recoated, good price then mate if thats the sort fo money it would cost.
that is a most interesting fact RE: the fixing and fastenings, should i find myself in a OEM BMW related pub quiz (sure they pop up from time to time) at least il know one answer
that is a most interesting fact RE: the fixing and fastenings, should i find myself in a OEM BMW related pub quiz (sure they pop up from time to time) at least il know one answer
-
hennabm
- Old Skooler

- Posts: 1395
- Joined: Sun Jul 08, 2007 11:00 pm
- Location: Edinburgh
On the earlier car a number of the parts and nuts/bolts etc were finished in yellow passivate.
The later cars were finished in a zinc type passivate.
I've had a few parts re-passivated over the years and to maintain their durability I have sprayed them in 2pack lacquer.
The later cars were finished in a zinc type passivate.
I've had a few parts re-passivated over the years and to maintain their durability I have sprayed them in 2pack lacquer.
'82 323i henna
'90 320iSE sterling silver No more!
'10 116d Sport Red - MkI
'12 1.4 Punto Easy Exotica Red
'11 X3 3.0d SE
'89 240 DL Estate
'90 320iSE sterling silver No more!
'10 116d Sport Red - MkI
'12 1.4 Punto Easy Exotica Red
'11 X3 3.0d SE
'89 240 DL Estate
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
would zinc plating be similar ?
from their website-
Zinc is primarily used as a coating for steel and provides excellent corrosion protection, although it can be plated onto other metals.
Thicknesses of up to 25 microns are normal and passivation treatments make the plating resistant to finger marking, while also providing a good base for painting.
The passivation finishes include Clear, Colour (iridescent), Black and Olive drab.
from their website-
Zinc is primarily used as a coating for steel and provides excellent corrosion protection, although it can be plated onto other metals.
Thicknesses of up to 25 microns are normal and passivation treatments make the plating resistant to finger marking, while also providing a good base for painting.
The passivation finishes include Clear, Colour (iridescent), Black and Olive drab.
-
hennabm
- Old Skooler

- Posts: 1395
- Joined: Sun Jul 08, 2007 11:00 pm
- Location: Edinburgh
Hi
yes zinc plating is the same. You will find most nut/bolt suppliers will do bright zinc dull zinc and what looks like a chrome finish. The yellow passivate finish is very hard to find.
I have bought just standard metric set screws and nuts in yellow passivate in a box from Frosts but the more specialist type like you are wanting, I have to buy in zinc and then take to my passivater friend.
I use a place in Hull called Alliance Electro plating.
For the bits you show I would buy new from BMW as it will probably be cheaper than cleaning and recoating the ones you have.
HTH
yes zinc plating is the same. You will find most nut/bolt suppliers will do bright zinc dull zinc and what looks like a chrome finish. The yellow passivate finish is very hard to find.
I have bought just standard metric set screws and nuts in yellow passivate in a box from Frosts but the more specialist type like you are wanting, I have to buy in zinc and then take to my passivater friend.
I use a place in Hull called Alliance Electro plating.
For the bits you show I would buy new from BMW as it will probably be cheaper than cleaning and recoating the ones you have.
HTH
'82 323i henna
'90 320iSE sterling silver No more!
'10 116d Sport Red - MkI
'12 1.4 Punto Easy Exotica Red
'11 X3 3.0d SE
'89 240 DL Estate
'90 320iSE sterling silver No more!
'10 116d Sport Red - MkI
'12 1.4 Punto Easy Exotica Red
'11 X3 3.0d SE
'89 240 DL Estate
-
fearlessphil
- E30 Zone Newbie

- Posts: 190
- Joined: Mon Jun 25, 2012 11:00 pm
i little know trick that i have used several times to unbelievable effect is apple cider vinager! soak the parts for 24 hours then wash off with warm soapy water bingo Not a apeck of rust on them at all! they are quite pourus after though so heat em up till cherry red with a blow lamp then dip them im motor oil (oil blacking) they come out all nice and black and rust resistant! simples!
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
awsome tip il keep that in mind as a back up after taking them to that company 1st and see what they say
-
alan1272
- E30 Zone Regular

- Posts: 414
- Joined: Sat Mar 04, 2006 11:00 pm
- Location: dyserth, north wales
why not have a bash at it yourself? saw some chaps using a kit similar to this on their rally build, with very good results.
http://www.gaterosplating.co.uk/Zinc-Plating-kit.php
http://www.gaterosplating.co.uk/Zinc-Plating-kit.php
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
homebrew zinc plating kit £60, a trial and error non proffessional go at it and hours of messing about and mess, vs a £15 proffessional job quater of the cost and no time or messing about ! although if was doing lots and regular it would be worth investing and learning it
-
alan1272
- E30 Zone Regular

- Posts: 414
- Joined: Sat Mar 04, 2006 11:00 pm
- Location: dyserth, north wales
-
scjimbo
- E30 Zone Camper

- Posts: 1249
- Joined: Thu Feb 09, 2012 11:00 pm
- Location: Gloucester
http://www.thisoldtractor.com/gtbender/zinc.htm
I might have a bash at this with the power supply I bought for the electrolysis bath.
I might have a bash at this with the power supply I bought for the electrolysis bath.
-
scjimbo
- E30 Zone Camper

- Posts: 1249
- Joined: Thu Feb 09, 2012 11:00 pm
- Location: Gloucester
Mind you real heros go for cad plating.



