Educate me?
Moderator: martauto
-
reepers13
- E30 Zone Newbie

- Posts: 116
- Joined: Thu Aug 09, 2012 11:00 pm
- Location: Surrey
Coilovers for e30 setup?
Fronts use traditional collies right
But on the rear the spring is seperate so is it then a shock/coil setup?
Or are these eBay kits coilovers on the rear too ie fully heigh adjustable?
My aim; drift use, camber caster and toe adjustment.
Solution; convert to e36 setup? I'd rather keep e30 if I could
Thanks
Fronts use traditional collies right
But on the rear the spring is seperate so is it then a shock/coil setup?
Or are these eBay kits coilovers on the rear too ie fully heigh adjustable?
My aim; drift use, camber caster and toe adjustment.
Solution; convert to e36 setup? I'd rather keep e30 if I could
Thanks
-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
you wanna fit ebay coilovers for drift use?
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
Depends, cheap nasty eBay coilovers use a separate spring with an adjustable spring perch. Procier coilovers use a traditional set up and mount on the shock absorber mountings
-
reepers13
- E30 Zone Newbie

- Posts: 116
- Joined: Thu Aug 09, 2012 11:00 pm
- Location: Surrey
Bc collies use what setup?
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
theres a set for sale on here for 300 notes
-
reepers13
- E30 Zone Newbie

- Posts: 116
- Joined: Thu Aug 09, 2012 11:00 pm
- Location: Surrey
Ooo where?polsta wrote:theres a set for sale on here for 300 notes
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
there's nothing wrong with the separate spring and damper setup, if done properly. just a lot of cheap generic kits can't seem to get their head around it and you end up with a bit of a missmatch.
decent companies still seem to be able to make the separate spring and damper locations work fine.
at the front, because of the way the front strut is made, cheapo coilovers will just use and adjustable platform and a cone shaped spring on top of the standard spring perch (a bit like the rear end setup) more expensive kits will come as a complete strut with traditional threaded collars, but you'll often need to send your old struts in to be modified.
if you don't want the expense of a 'proper' front setup, and can (or know someone who can) weld, you can buy threaded collars and get them welded to your existing struts, so you can then use traditional style collars and springs, with the damper of your choice.
the e36 front setup has the advantage of the damper bolting to a separate spindle, so theyre generally cheaper and easier to get hold of off the shelf. it does mean needing to change a lot of other bits too though!
decent companies still seem to be able to make the separate spring and damper locations work fine.
at the front, because of the way the front strut is made, cheapo coilovers will just use and adjustable platform and a cone shaped spring on top of the standard spring perch (a bit like the rear end setup) more expensive kits will come as a complete strut with traditional threaded collars, but you'll often need to send your old struts in to be modified.
if you don't want the expense of a 'proper' front setup, and can (or know someone who can) weld, you can buy threaded collars and get them welded to your existing struts, so you can then use traditional style collars and springs, with the damper of your choice.
the e36 front setup has the advantage of the damper bolting to a separate spindle, so theyre generally cheaper and easier to get hold of off the shelf. it does mean needing to change a lot of other bits too though!
cheers,
harry
harry
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
not coilovers gas struts but may be suitable ?reepers13 wrote:Ooo where?polsta wrote:theres a set for sale on here for 300 notes
http://www.e30zone.net/modules.php?name ... c&t=224897
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Isnt it about time the differs started welding dampers up solid at the required drop? Its got to be better than useable suspension surely? After all, the tyre has plenty of 'give'
innit
innit
-
shanehaward
- E30 Zone Regular

- Posts: 532
- Joined: Fri Mar 13, 2009 11:00 pm
- Location: medway kent
i dont plan on keeping my ebay coilovers forever, they were only ever ment to be temporary, but...
ebay coilovers = £200
brand name = £800+
ive had a mk3 vr6 with cheap coilovers and had another vr6 with kw coilovers and they both handled almost identical. I know kw's etc are better made and will last longer but i would choose ebays over lowering springs and shocks anyday of the week and they proberly work out cheaper too if you buy new.
(p.s. i do plan to get kw's/gaz etc.. in the future but only for kudos)
ebay coilovers = £200
brand name = £800+
ive had a mk3 vr6 with cheap coilovers and had another vr6 with kw coilovers and they both handled almost identical. I know kw's etc are better made and will last longer but i would choose ebays over lowering springs and shocks anyday of the week and they proberly work out cheaper too if you buy new.
(p.s. i do plan to get kw's/gaz etc.. in the future but only for kudos)
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Innit!DanThe wrote:Isnt it about time the differs started welding dampers up solid at the required drop? Its got to be better than useable suspension surely? After all, the tyre has plenty of 'give'
innit
-
reepers13
- E30 Zone Newbie

- Posts: 116
- Joined: Thu Aug 09, 2012 11:00 pm
- Location: Surrey
thanks for the replys.
i had some cheapo ebay collies on my 36 328i that came on the car like new, but very soft and for drifting not what i want.
daz do collies for £650-700 dont they?? i dont mind spending decent money on something like this but if i am id like to have traditional rear collies.
please educate me with this 51mm front strut thing. mines a H reg 325i non sport. but has sport suspension there at the min
harryP - i know a good welder, actually the car helping build the car so any more info on what your refering too or point me in the right direction.
sorry for all the q's kind of new to e30's (although had a 325 about 8yrs ago but not for this drift stuff :p)
i had some cheapo ebay collies on my 36 328i that came on the car like new, but very soft and for drifting not what i want.
daz do collies for £650-700 dont they?? i dont mind spending decent money on something like this but if i am id like to have traditional rear collies.
please educate me with this 51mm front strut thing. mines a H reg 325i non sport. but has sport suspension there at the min
harryP - i know a good welder, actually the car helping build the car so any more info on what your refering too or point me in the right direction.
sorry for all the q's kind of new to e30's (although had a 325 about 8yrs ago but not for this drift stuff :p)
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
http://www.raceperformancemodified.com/ ... ilover-Kit
Why must you have a set of coilovers on the rear?
And you will already have 51mm struts.
Why must you have a set of coilovers on the rear?
And you will already have 51mm struts.
-
reepers13
- E30 Zone Newbie

- Posts: 116
- Joined: Thu Aug 09, 2012 11:00 pm
- Location: Surrey
im not saying MUST.. im saying if im paying good money like £700+ then id expect rear coilovers.ross_jsy wrote:http://www.raceperformancemodified.com/ ... ilover-Kit
Why must you have a set of coilovers on the rear?
And you will already have 51mm struts.
what are bc racing ones like?
-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
But why coilovers? There's nothing wrong with springs and shocks....
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!
-
reepers13
- E30 Zone Newbie

- Posts: 116
- Joined: Thu Aug 09, 2012 11:00 pm
- Location: Surrey
im coming from a history of jap cars and i swear by coilovers. i guess thats my reasoning. if an e30 will handle as good with seperate springs then ill consider itMorat wrote:But why coilovers? There's nothing wrong with springs and shocks....
but when it costs more to have rear coilovers on an e30 im presuming your payng a higher premium for a reason?
-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
It's just that the suspension design of the E30 doesn't lend itself to coilovers as easily as some others. If you get conventional coilovers at the rear your putting loads through the shock towers that they were not designed to cope with so you'll need to do work to reinforce them.
If you want to do that, fine - it's up to you. But a decent set of shocks/springs works well if you're happy to live with the "set it and forget it" nature of the setup.
Camber isn't adjustable on the E30 as stock. For the front you can use adjustable top mounts, for the rear you need to weld tabs onto the rear beam and use wiggle bolts. A quick search on here should show you what you're looking for.
this thread should be useful
http://www.e30zone.net/modules.php?name ... ber+adjust
If you want to do that, fine - it's up to you. But a decent set of shocks/springs works well if you're happy to live with the "set it and forget it" nature of the setup.
Camber isn't adjustable on the E30 as stock. For the front you can use adjustable top mounts, for the rear you need to weld tabs onto the rear beam and use wiggle bolts. A quick search on here should show you what you're looking for.
this thread should be useful
http://www.e30zone.net/modules.php?name ... ber+adjust
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
E30 rear can handle coil over damper design quite adequately, I track my car hard on very stiff springs, no issues at all, in fact calculations have shown the stock panel being able to handle the loads.
Of course if we go in to the DTM realms then yes the rear turrets need reinforcements for sure.
Of course if we go in to the DTM realms then yes the rear turrets need reinforcements for sure.
-
reepers13
- E30 Zone Newbie

- Posts: 116
- Joined: Thu Aug 09, 2012 11:00 pm
- Location: Surrey
thanksMorat wrote:It's just that the suspension design of the E30 doesn't lend itself to coilovers as easily as some others. If you get conventional coilovers at the rear your putting loads through the shock towers that they were not designed to cope with so you'll need to do work to reinforce them.
If you want to do that, fine - it's up to you. But a decent set of shocks/springs works well if you're happy to live with the "set it and forget it" nature of the setup.
Camber isn't adjustable on the E30 as stock. For the front you can use adjustable top mounts, for the rear you need to weld tabs onto the rear beam and use wiggle bolts. A quick search on here should show you what you're looking for.
this thread should be useful
http://www.e30zone.net/modules.php?name ... ber+adjust
ive got a fully poly bushed rear subframe ready to go in with full camber ond toe adjustables, also reinforced lower arms
i want a stiff setup for the rear but couldnt find any solid bushes for it
whats a decent rear suspension setup then? ive heard the spax rsx are quite good but then these are not collies up front correct??
height adjustment and damper soft/hard adjustment are very important to the setup.
-
reepers13
- E30 Zone Newbie

- Posts: 116
- Joined: Thu Aug 09, 2012 11:00 pm
- Location: Surrey
spring rates also important as running m60b40
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Im running AST race, £2200 + VAT and full rear dual rate coilover, extremely light as its made from billet aluminium which is then case hardened to 25 microns.reepers13 wrote:thanksMorat wrote:It's just that the suspension design of the E30 doesn't lend itself to coilovers as easily as some others. If you get conventional coilovers at the rear your putting loads through the shock towers that they were not designed to cope with so you'll need to do work to reinforce them.
If you want to do that, fine - it's up to you. But a decent set of shocks/springs works well if you're happy to live with the "set it and forget it" nature of the setup.
Camber isn't adjustable on the E30 as stock. For the front you can use adjustable top mounts, for the rear you need to weld tabs onto the rear beam and use wiggle bolts. A quick search on here should show you what you're looking for.
this thread should be useful
http://www.e30zone.net/modules.php?name ... ber+adjust
ive got a fully poly bushed rear subframe ready to go in with full camber ond toe adjustables, also reinforced lower arms
i want a stiff setup for the rear but couldnt find any solid bushes for it
whats a decent rear suspension setup then? ive heard the spax rsx are quite good but then these are not collies up front correct??
height adjustment and damper soft/hard adjustment are very important to the setup.
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Will you be reinforcing your quarter panels Andrew? 
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
No not really DanThe, mines are completely rust free 
-
reepers13
- E30 Zone Newbie

- Posts: 116
- Joined: Thu Aug 09, 2012 11:00 pm
- Location: Surrey
im leaning towards bc coilovers now
spoke to a uk seller who can get me custom spring rates, i was thinking 10kg all round for a nice stiff setup with the m60b40 upfront.
any thoughts on this?
thanks
spoke to a uk seller who can get me custom spring rates, i was thinking 10kg all round for a nice stiff setup with the m60b40 upfront.
any thoughts on this?
thanks
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
10kg rear non coilover?
-
reepers13
- E30 Zone Newbie

- Posts: 116
- Joined: Thu Aug 09, 2012 11:00 pm
- Location: Surrey
CorrectDemlotcrew wrote:10kg rear non coilover?
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
I dont think I can help, I'm not too clued up on the balance ratios of an inboard spring arrangement, in very basic terms 10kg inboard rear should be good, but I dont want to say for sure without knowing.
-
reepers13
- E30 Zone Newbie

- Posts: 116
- Joined: Thu Aug 09, 2012 11:00 pm
- Location: Surrey
well bc lists 6kg for an e30 so 10kg should be a vast improvment i would have thought
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
The problem is the lever ratio for the back, I don't have the figures to reverse engineer from true rear coilovers to inboard spring arrangement.
Generally speaking you want to have a loose rear end and a grippy front end that doesn't scrub off speed in the bends (this is for drifting). One way to get this is to make sure the beam is solidly mounted to the chassis and the other way is with high spring rates. But there are a few other considerations to be made, such as camber, weight and wheel/tyre width/choice. For a well balanced track car, the general rule of thumb with true real coilovers is the rear spring rate is roughly half the front, but with in board springs its very different, hopefully someone else will be able to help you.
Generally speaking you want to have a loose rear end and a grippy front end that doesn't scrub off speed in the bends (this is for drifting). One way to get this is to make sure the beam is solidly mounted to the chassis and the other way is with high spring rates. But there are a few other considerations to be made, such as camber, weight and wheel/tyre width/choice. For a well balanced track car, the general rule of thumb with true real coilovers is the rear spring rate is roughly half the front, but with in board springs its very different, hopefully someone else will be able to help you.
-
reepers13
- E30 Zone Newbie

- Posts: 116
- Joined: Thu Aug 09, 2012 11:00 pm
- Location: Surrey
thanks,Demlotcrew wrote:The problem is the lever ratio for the back, I don't have the figures to reverse engineer from true rear coilovers to inboard spring arrangement.
Generally speaking you want to have a loose rear end and a grippy front end that doesn't scrub off speed in the bends (this is for drifting). One way to get this is to make sure the beam is solidly mounted to the chassis and the other way is with high spring rates. But there are a few other considerations to be made, such as camber, weight and wheel/tyre width/choice. For a well balanced track car, the general rule of thumb with true real coilovers is the rear spring rate is roughly half the front, but with in board springs its very different, hopefully someone else will be able to help you.
normally the front should be slightly softer to avoid the understeer, these bc come with adjustable top mounts for camber and stiffness.
the rear is spring and shock set up but i know nothing about this
i have a rear subframe that has the camber/toe plates with bolts and the trailing arms or lower arms whatever you call them have had a strengthening bar welded to avoid and flex in them.
wheels initially will be 9.75x17 et25 with a 20mm adapter spacer thus giving an et5
ps for drifting you want as much grip as possible at the rear and front... to lose traction you play with tyre pressure but i will want to run no more than -1 camber rear and -2/3 front
-
reepers13
- E30 Zone Newbie

- Posts: 116
- Joined: Thu Aug 09, 2012 11:00 pm
- Location: Surrey
yes mateDemlotcrew wrote:10kg rear non coilover?

