Lads,
I have a set of -60mm front lowering springs, the seller tells me they are definately for a 4 cylinder E30, however they are different to other E30 springs that I have seen in that they are different widths at top and bottom.
The bottom diameter is 140mm the top is 85mm.
They are blue, and the only marking on them is a code TSA009BM.
Is it possible they are for another BMW or will they fit my E30?
Any help appreciated.
Thanks, Michael
Wrong Springs?
Moderator: martauto
-
Rtaylor2208
- E30 Zone Addict
- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
The dont sound like E30 springs as they should the same diameter top and bottom as then need to fit into the spring pads within the strut.
-
Duke137
- Married to the E30 Zone
- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
MickoE30
- E30 Zone Newbie
- Posts: 140
- Joined: Wed Oct 03, 2007 11:00 pm
- Location: Sperrins
Yes, thats what they are, in the right of the pic above.
Thanks.
Yeah, direct fit springs should be same diameter top and bottom.
By the way R Taylor, I have the same rims on my iS (only with gold centres and polished lip). Look great on your cab - not many sets about in 4-stud!
Thanks.
Yeah, direct fit springs should be same diameter top and bottom.
By the way R Taylor, I have the same rims on my iS (only with gold centres and polished lip). Look great on your cab - not many sets about in 4-stud!