320 cab exhaust
Moderator: martauto
-
davek320
- E30 Zone Newbie

- Posts: 10
- Joined: Sun Aug 05, 2012 11:00 pm
hi can anyone tell me if a coupe exhaust system will fit a converible please? as having night mare trying to find a cheap after market one for mine
-
macas
- E30 Zone Squatter

- Posts: 1696
- Joined: Sat Mar 10, 2007 11:00 pm
- Location: BEAUTIFUL BIRMINGHAM
I cant recommend enough to try and find even a second hand or knew original bmw exhaust,every after market centre boxs and back boxs etc have been so shit!!(theyv broke baffles etc) within two weeks!
-
macas
- E30 Zone Squatter

- Posts: 1696
- Joined: Sat Mar 10, 2007 11:00 pm
- Location: BEAUTIFUL BIRMINGHAM
BUt to answer your question...yes a coupe exhaust will fit,(obviously if its from a 2.l)...
-
davek320
- E30 Zone Newbie

- Posts: 10
- Joined: Sun Aug 05, 2012 11:00 pm
ok thanks
iv seen this on ebay 180943447145(klarius full exhaust) but not sure. lol
iv seen this on ebay 180943447145(klarius full exhaust) but not sure. lol
-
capri_rob
- Married to the E30 Zone

- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
As long as you match the year and engine type the exhausts are interchangeable - so an exhaust from a 1988 320i touring or saloon should go straight on a 1988 320i Convertible.
However you need to check whether yours is a 2 piece or 3 piece system - 2 piece ones are more commonly fitted to later cars and seem harder to find
However you need to check whether yours is a 2 piece or 3 piece system - 2 piece ones are more commonly fitted to later cars and seem harder to find

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
davek320
- E30 Zone Newbie

- Posts: 10
- Joined: Sun Aug 05, 2012 11:00 pm
mine a 1989 think its a 3 peace, ill have to find out.
-
johnt0709
- E30 Zone Addict

- Posts: 2291
- Joined: Mon Nov 06, 2006 11:00 pm
- Location: West of Scotland
2 or 3 piece is relevant, however equally important is the manifold connection - 3 bolt and 4 bolt with2 different sizes. Especially important if it is a 2 piece as this includes the connection to the manifold.
Phase I - Bodywork Complete
http://www.e30zone.net/modules.php?name ... by+restore
Phase II - 2.8 stroker- Complete
Project II - 325 Motorsport Cabriolet Restoration.
http://www.e30zone.net/modules.php?name ... by+restore
Phase II - 2.8 stroker- Complete
Project II - 325 Motorsport Cabriolet Restoration.
