i recall some threads about deleting the oil cooler as its not neccessary due to the type of oils in use, i think??
cant seem to find anything on it though, is it a matter of simply disconnecting the lines from the engine and putting in some nuts? to blank the holes in the block,
m20 oil cooler delete
Moderator: martauto
-
jmc330i
- Engaged to the E30 Zone
- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
From memory, you remove the oil cooler take off and use the union/bolt that holds the filter on the M20B20. That's what I did on my B25.
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
bmw9818
- E30 Zone Addict
- Posts: 2561
- Joined: Tue Aug 11, 2009 11:00 pm
- Location: Croydon
-
jmc330i
- Engaged to the E30 Zone
- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
That could be it, hard to tell from those pics.
Stick up a wanted ad or contact one of the fraggers on here, they'll know which bit you're after.
Basically you remove the oil cooler take off plate and screw that piece in. The filter just screws on as it would on a 320i. I had no issues removing the cooler on my 325i lump.
Stick up a wanted ad or contact one of the fraggers on here, they'll know which bit you're after.
Basically you remove the oil cooler take off plate and screw that piece in. The filter just screws on as it would on a 320i. I had no issues removing the cooler on my 325i lump.
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v