Most of the electrical plugs around my engine bay are corroded and frayed; the headlights, fog lights and indicators are particularly brittle.
These all use a standard BMW plug; some sort of plastic-covered elbow, about 2.5mm. My plan is to chop off all of them and solder on new plugs, but I can't work out via RealOEM what the part number is, or whether there's a universal equivalent. Anyone else done something similar?
Part number request
Moderator: martauto
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
No 3 - http://www.realoem.com/bmw/showparts.do ... g=61&fg=15
You might change your plan after pricing them up...
E36 E34 etc have plenty of the same connectors
You might change your plan after pricing them up...
E36 E34 etc have plenty of the same connectors
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
4 quid EACH
Yeah, I might need to find a cheaper alternative...
Yeah, I might need to find a cheaper alternative...
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
