Got loads of grime and oil on the block possible to use a wallpaper stripper as a steam cleaner and will it come off?
Wiring is gonna be renewed to 1.3 so not an issue heads off as well shoul I obv avoid targeting the alternator and starter and just the bottom half?
Cleaning engine block? Steam clean...
Moderator: martauto
-
Topblag
- Old Skooler

- Posts: 7095
- Joined: Wed Jul 30, 2008 11:00 pm
- Location: Fife - You got a problem with that ?
I spray the engine with TFR then hose it off. If it's heavier grime, use spray on gunk. Work it in to the worst areas with a brush of some sort and be careful with water near the electrics.
You'll be pleasantly surprised how much dirt it'll remove.
I used to leave the engine running and clean it with a hot power washer, which essentially put out hot steam. Never brought any problems.
You'll be pleasantly surprised how much dirt it'll remove.
I used to leave the engine running and clean it with a hot power washer, which essentially put out hot steam. Never brought any problems.
1990 325i Cab auto in Alpine White II
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
-
bmw9818
- E30 Zone Addict

- Posts: 2561
- Joined: Tue Aug 11, 2009 11:00 pm
- Location: Croydon
cool spent enuff money on this car allready! tfrs a bit much, will just use the wallpaper stripper with a nozzle to clean it up as best it does,
-
Topblag
- Old Skooler

- Posts: 7095
- Joined: Wed Jul 30, 2008 11:00 pm
- Location: Fife - You got a problem with that ?
I'd suggest you use a degreaser, it'll work well with the steam.
1990 325i Cab auto in Alpine White II
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
-
Gavla
- E30 Zone Squatter

- Posts: 1586
- Joined: Tue Dec 06, 2011 11:00 pm
I used Astonish Engine Degreaser on my engine, worked an absolute treat!
At £1.25 a bottle from Amazon you can't go go wrong. Use a couple of bottles if necessary it really made my engine look brand new.
At £1.25 a bottle from Amazon you can't go go wrong. Use a couple of bottles if necessary it really made my engine look brand new.
-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
Yeah I used a litre a engine degreaser in a squirty bottle, spray it on, leave it to soak for 15 mins then the same squirty bottle with fresh water to rinse. Spotless.! Again take care with with the electrical components.
Don't be too alarmed at the steam from the engine when you run it mind.!
Don't be too alarmed at the steam from the engine when you run it mind.!
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Just remember anything you degrease will have zero protection from the elements once your done, the oil thats been stuck to everything for the last 20 odd years will have been doing a great job of keeping everything rust free. I prefer to use 3-in-1 spray oil or similar with a stiff brush to leave a bit of a protective layer behind
-
Topblag
- Old Skooler

- Posts: 7095
- Joined: Wed Jul 30, 2008 11:00 pm
- Location: Fife - You got a problem with that ?
that's good advice.
1990 325i Cab auto in Alpine White II
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
1988 Alpina C2.5 moredoor in Black, 71k
1990 325ix, moredoor auto in Laser Blue. 51k
1984 Hartge H35 in Black
2004 996 C4S in Silver 43k manual
2006 Audi S6 V10 in Black 58k
-
bmw9818
- E30 Zone Addict

- Posts: 2561
- Joined: Tue Aug 11, 2009 11:00 pm
- Location: Croydon
nice one, with the rust issue allready got some waxoyl etc to go around the engine bay, so that should be cool, engine block is fairly solid,
