Just bought a 318is, very cheap.
Very good condition, its needs the clutch bearing replacing by the sounds of it.
And was wondering what is the best affordable clutch you can fit to an IS. I've heard of people fitting a standard 325i clutch due to it being single mass?
Also, is the exhaust system the same as a 318i?
Cheers
e30 318is
Moderator: martauto
-
DHFiS
- Old Skooler

- Posts: 2733
- Joined: Sat Aug 12, 2006 11:00 pm
- Location: cambridge
Dual mass flywheels are uncommon, does your car have A/C?
Exhaust is not the same as the 318i.
Exhaust is not the same as the 318i.
-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
The flywheel, clutch and starter from a 320i will do just the job.
-
e30kid6
- E30 Zone Newbie

- Posts: 135
- Joined: Thu Nov 10, 2011 11:00 pm
- Location: Medway
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
you can change the small cog over to one from an m20 so you might as well just fit the whole thing .

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds

