Glass removal

[Hoobs]

Just stripping shell prior to sending off for cage and need to remove all the glass.

Apart from using a hammer are there any tips / techniques to make it easier?

[BATTS91]

no hammers ect required for front and back take outer middle bead out an they pretty much push out .
Rear quarter windows if not popouts lay in back and push out with your feet

[Hoobs]

Thanks.

It all came out far more easily than expected tbh. Only downer was the front screen which developed a tiny tiny crack. Big enough to render is useless though.

[bimanut]

no hammers ect required for front and back take outer middle bead out an they pretty much push out .
Rear quarter windows if not popouts lay in back and push out with your feet

Got to remove some pop outs soon,any tips cuz i dont want to break them

[milescook]

Took my windscreen out after some tips very easily. It stayed under my bed for 2 months while the cage was fitted.

When putting it in the other car to take to a garage, so they could put it back in (the bit more difficult part), I held it horizontally and the weight of it cracked itself... top tip there hold them upright when moving them about!

[BATTS91]

first id undo the two screws at the hinge ,

Then theres 2 8mm nuts 1 behind the circle bung and 1 behind the hook at top , you will probs need 1/4 " socketand extension , whilst undoing second nut hold window as precaution but shouldnt fall out ;)

[bimanut]

Ta very much

[BATTS91]

No problemo sir