help wanted with electric hood and mechanisms
Moderator: martauto
-
Gert_8
- Married to the E30 Zone

- Posts: 11302
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
^^ that the "Z" shaped key in your tool kit - if you've got one.

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
-
matt86
- E30 Zone Addict

- Posts: 2468
- Joined: Thu Jan 19, 2012 11:00 pm
- Location: "The Cotswolds" Stroud, Gloucestershire
Oh you mean that thing under the bootlid which only has one spanner in.lolGert_8 wrote:^^ that the "Z" shaped key in your tool kit - if you've got one.
May have to invest in a new tool kit, where do you actually insert it though?
-
matt86
- E30 Zone Addict

- Posts: 2468
- Joined: Thu Jan 19, 2012 11:00 pm
- Location: "The Cotswolds" Stroud, Gloucestershire
that will be good I'll find out what I need and let you know. Cheers mateben9040 wrote:I have a few spares in my garage including horseshoe cables etc so if you are missing anything I might be able to provide it for a reasonable price, let me know ideally with pics if something is broken or what you think is missing and I can see if I have it.
-
Gert_8
- Married to the E30 Zone

- Posts: 11302
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
Two motors in the boot. It fits into the hole in the one that you can see against the rear panel. The hole with all the scratch marks around it....
I can't remember which way to turn it to lock/unlock..
I can't remember which way to turn it to lock/unlock..

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
-
Gert_8
- Married to the E30 Zone

- Posts: 11302
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
Hey Dudes, The plate arrived. I replaced the old one and it has stopped the roof catching problem I described earlier! Yippee!
I'm hoping that now I can re-synchronise the motors and everything starts to work again. If time allows at the weekend, I'll try doing this and keep you posted.
Any tips are more than welcome on the procedure and what to do/look out for.
Cheers.
I'm hoping that now I can re-synchronise the motors and everything starts to work again. If time allows at the weekend, I'll try doing this and keep you posted.
Any tips are more than welcome on the procedure and what to do/look out for.
Cheers.

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
