For those of you who don't know about my car (which is probably all of you). I am currently the proud owner of a 87 320 chromie.
It is in very good, original oem condition, apart from painted suspension parts/ polybushes etc.
It has loads of history and all in all is a great little motor. As we all know its unlikely to be worth any serious cash any time soon as its basically a standard 6 pot, with not a lot else going for it.
However it is my absolute pride and joy and TBH I couldn't bring myself to sell.
My question is this. I'm nearby to, and know loads of people who are into hillclimbing at prescott. The mechanic who is storing the car for me is well into hillclimbing, and has always said I should enter with the BM. Who thinks I should stop focusing on the car as a restore, and pumping money into OEM bits etc, and hillclimb the car. This obviously carries risk of damage. It also means i would have to put cut off switches and fuel tanks etc that takes the car away from original condition.
Discuss and advise please.
CIA
To climb or not to climb
Moderator: martauto
-
Rich320I
- E30 Zone Camper

- Posts: 1272
- Joined: Tue Dec 06, 2011 11:00 pm
- Location: Worcester
yep 320-325 same number of cylinders different displacement
hill climbe for sure, iv been to shelsey walsh loads of times to spectate, seen a few bangs, but im tempted to have a go myself,
not far from you either mate, its in worcester
hill climbe for sure, iv been to shelsey walsh loads of times to spectate, seen a few bangs, but im tempted to have a go myself,
not far from you either mate, its in worcester
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
I'm building my car for hillclimb use.
It depends how far you want to take it and what class you want to enter. You can enter it how it is in standard production, you aren't going to be competitive but then again, no e30 is without silly money being spent.
What would you like to do to it/budget? Mine has a full cage, m50, 4 pots etc etc and will be entered in mod prod
It depends how far you want to take it and what class you want to enter. You can enter it how it is in standard production, you aren't going to be competitive but then again, no e30 is without silly money being spent.
What would you like to do to it/budget? Mine has a full cage, m50, 4 pots etc etc and will be entered in mod prod
-
Rich320I
- E30 Zone Camper

- Posts: 1272
- Joined: Tue Dec 06, 2011 11:00 pm
- Location: Worcester
What Ross says about competitiveness is totally true,
people spend a lot of money to be competitive at hill climbing, but just from my point of view I think youd have a heck of a lot of fun in a pretty standard car anyway it’s the taking part initially that counts. Then when you get addicted youl be spending all your pennies on suspension and engine mods
people spend a lot of money to be competitive at hill climbing, but just from my point of view I think youd have a heck of a lot of fun in a pretty standard car anyway it’s the taking part initially that counts. Then when you get addicted youl be spending all your pennies on suspension and engine mods
-
scjimbo
- E30 Zone Camper

- Posts: 1249
- Joined: Thu Feb 09, 2012 11:00 pm
- Location: Gloucester
To be honest I don't want to spend a fortune. My missus has been into motorsport for years and it would be nice for us to have something to do together.ross_jsy wrote:I'm building my car for hillclimb use.
It depends how far you want to take it and what class you want to enter. You can enter it how it is in standard production, you aren't going to be competitive but then again, no e30 is without silly money being spent.
What would you like to do to it/budget? Mine has a full cage, m50, 4 pots etc etc and will be entered in mod prod
I'm not really looking to win so much as have fun.
-
Rich320I
- E30 Zone Camper

- Posts: 1272
- Joined: Tue Dec 06, 2011 11:00 pm
- Location: Worcester
then just turn up and enjoy yourself 
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
Keep your nice one and get another cheap shed to strip out and mod 
-
Eddie25
- E30 Zone Newbie

- Posts: 37
- Joined: Fri Dec 29, 2006 11:00 pm
- Location: Gloucestershire
+1suchy wrote:Keep your nice one and get another cheap shed to strip out and mod
Rust is lighter than carbon fibre.
-
scjimbo
- E30 Zone Camper

- Posts: 1249
- Joined: Thu Feb 09, 2012 11:00 pm
- Location: Gloucester
That's part of the problem. I have pretty limited storage so unfortunately there is only room in my life for one toy.suchy wrote:Keep your nice one and get another cheap shed to strip out and mod
Does anyone have any idea what licences are required.
Also what safety kit is needed (i.e.) cages/3 point harnesses etc?
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
All depends on class. Enter standard production and leave the car standard if you don't have space for a second car.
License, you just need to apply for an MSA B class I believe it's called. No tests, you just apply.
Don't go down the route of cage/harness' if it's your only car. It's also a very expensive route as you will need a cage, in date seat, in date harness and all the other ancillaries such as cut off's that go with that class.
If you do decide you want to do more than standard production, my advise is buy a pre-built car. You won't have the pleasure (not sure if that's really the word) of building your own but it will cost you a hell of a lot less.
License, you just need to apply for an MSA B class I believe it's called. No tests, you just apply.
Don't go down the route of cage/harness' if it's your only car. It's also a very expensive route as you will need a cage, in date seat, in date harness and all the other ancillaries such as cut off's that go with that class.
If you do decide you want to do more than standard production, my advise is buy a pre-built car. You won't have the pleasure (not sure if that's really the word) of building your own but it will cost you a hell of a lot less.
-
scjimbo
- E30 Zone Camper

- Posts: 1249
- Joined: Thu Feb 09, 2012 11:00 pm
- Location: Gloucester
Brilliant cheers ross.ross_jsy wrote:All depends on class. Enter standard production and leave the car standard if you don't have space for a second car.
License, you just need to apply for an MSA B class I believe it's called. No tests, you just apply.
Don't go down the route of cage/harness' if it's your only car. It's also a very expensive route as you will need a cage, in date seat, in date harness and all the other ancillaries such as cut off's that go with that class.
If you do decide you want to do more than standard production, my advise is buy a pre-built car. You won't have the pleasure (not sure if that's really the word) of building your own but it will cost you a hell of a lot less.
I think you have made up my mind for me
