has anyone made their own exhaust?

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
alan1272
E30 Zone Regular
E30 Zone Regular
Posts: 414
Joined: Sat Mar 04, 2006 11:00 pm
Location: dyserth, north wales

Post Thu Jul 05, 2012 12:31 am

after having to retire from a rally on the weekend when i did this to my exhaust, i'm in the market for a new one.
Image
Image

it's for an m42 engined car but i can't seem to find any through the usual budget motorfactors and an oem bmw one or a custom stainless one will be far to expensive for the brutal treatment they'll get down the rough whites.

does anyone know where i could get a cheap 318is exhaust?

the alternative route is to make my own, so i was wondering if there are any recommended suppliers that people get their exhaust parts from? bits like straight lenghts, 45 degree bends and silencers, in mild steel ideally.
thanks,
alan.
Image
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Thu Jul 05, 2012 12:52 am

Good effort sir! I considered doing it on my white one, demontweaks has lots of pipe sizes, bends all that stuff to build a pipe.
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
BATTS91
E30 Zone Squatter
E30 Zone Squatter
Posts: 1764
Joined: Sat May 01, 2010 11:00 pm
Location: clacton on sea essex

Post Thu Jul 05, 2012 1:34 am

i bought 2metre lenghs of exhause pipe from my local car spares shop. , ecp also sell it .
think i payed 12£ for 2m of mild steel 2.5" pipe :)
zaust
Zone day release
Posts: 13007
Joined: Sun Jan 09, 2005 11:00 pm
Location: Somewhere in Hertfordshire , or press Ctrl + W

Post Thu Jul 05, 2012 7:58 am

Got my bits from predator in Welwyn garden city. They made the 2 into one Y peace for me and I did the rest.
M30 Tech 1 Touring on gas.
Image
User avatar
alan1272
E30 Zone Regular
E30 Zone Regular
Posts: 414
Joined: Sat Mar 04, 2006 11:00 pm
Location: dyserth, north wales

Post Fri Jul 06, 2012 12:37 pm

thanks chaps,
i've obtained 2m of mild steel pipe and a selection of bends from the local motorfactors.
a friend who also rallies a 318is has suggested a couple of silencers that demon tweeks stock to get it under the noise test regs (98dBa limit but i'd prefer to be well under).

i'd notice that jetex do a rear half of the system for around £200, but i'll try it my way first and see how i get on.
Image
User avatar
redcar
E30 Zone Squatter
E30 Zone Squatter
Posts: 1610
Joined: Wed Jul 20, 2011 11:00 pm
Location: Hertfordshire

Post Fri Jul 06, 2012 12:44 pm

Yep, for my 318is 2.5"

Image
Image
Image
Image
Image
Image
GemE30
E30 Zone Regular
E30 Zone Regular
Posts: 930
Joined: Sat Jun 05, 2010 11:00 pm
Location: Notts

Post Fri Jul 06, 2012 1:24 pm

We made mine on my old E30 tourer and fella has recently done the one on my current tourer :D
Image
User avatar
alan1272
E30 Zone Regular
E30 Zone Regular
Posts: 414
Joined: Sat Mar 04, 2006 11:00 pm
Location: dyserth, north wales

Post Sat Jul 07, 2012 10:41 am

Redcar: that looks like a nice job, is it stainless? how loud is it with the single silencer?
Image
User avatar
redcar
E30 Zone Squatter
E30 Zone Squatter
Posts: 1610
Joined: Wed Jul 20, 2011 11:00 pm
Location: Hertfordshire

Post Sat Jul 07, 2012 10:57 am

alan1272 wrote:Redcar: that looks like a nice job, is it stainless? how loud is it with the single silencer?
Mild steel, made using pre bent sections.
It's really very loud with the one silencer. 4 pot though.
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Jul 07, 2012 11:17 am

May be an :idea: to see if you can incorporate some skids or protective plates of some kind to help this one out!
Youth is wasted on the young.
User avatar
redcar
E30 Zone Squatter
E30 Zone Squatter
Posts: 1610
Joined: Wed Jul 20, 2011 11:00 pm
Location: Hertfordshire

Post Sat Jul 07, 2012 11:20 am

daimlerman wrote:May be an :idea: to see if you can incorporate some skids or protective plates of some kind to help this one out!
Sorry? My exhaust doesn't scrape at all winkeye
steve_k
E30 Zone Team Member
E30 Zone Team Member
Posts: 8044
Joined: Fri May 23, 2008 11:00 pm
Location: in the vale of mansfield

Post Sat Jul 07, 2012 11:59 am

I'm in the middle of making my own system after my middle box split (blew?) open & I'm using 50mm T304 stainless steel pipes from jetex.

taking it from the end of my X-pipe straight through to the back box & keeping it as twin pipes.

so far it's cost me £80 in pipes & getting them bent.

also making up some new down pipes for my magnex 6 branch manifold as they are starting to look a bit frilly.

so all in cost? About £140.
if it's got t*ts or wheels it's bound to be trouble...............prove me wrong.
getting oral sex off an ugly person is like rock climbing.....don't look down ;)
User avatar
redcar
E30 Zone Squatter
E30 Zone Squatter
Posts: 1610
Joined: Wed Jul 20, 2011 11:00 pm
Location: Hertfordshire

Post Sat Jul 07, 2012 1:42 pm

My silencer was 2/3 of the cost of the exhaust 8O
User avatar
alan1272
E30 Zone Regular
E30 Zone Regular
Posts: 414
Joined: Sat Mar 04, 2006 11:00 pm
Location: dyserth, north wales

Post Sat Jul 07, 2012 3:21 pm

daimlerman wrote:May be an :idea: to see if you can incorporate some skids or protective plates of some kind to help this one out!
yes i had welded a skid on the backbox but the exhaust broke just where it emerged from behind the sump guard. i'll definately be making skids and plenty of hangers on this one to help it stay put when confronted by wales' finest boulders again!

i think i'll be using two of the oval jetex silencers available from tweeks, i already have 2m of mild steel pipe and several bends in 2 1/4" flavour.
Image