M20 B25 Sump Gasket ????

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

scott180gtb
E30 Zone Camper
E30 Zone Camper
Posts: 1251
Joined: Thu Mar 26, 2009 11:00 pm
Location: Yorkshire

Post Wed Jul 04, 2012 8:46 am

I posted up a while ago that I needed to change my sump gasket.

I think andyboy recommended a particular brand of gasket.

Has anyone got experience of the best gasket to use?

Thanks

Scott
Cars

2007 VW Caravelle 2.5 TDI 250 bhp 550 NM
1989 325i Sport Gone :(
2003 E46 320d Touring
1998 E36 M3 EVO Track Toy
1996 E36 328i Sport welder-up project
maggspower
Turbo Farmer Tractor Driver
Posts: 2376
Joined: Wed Oct 12, 2005 11:00 pm
Location: Nowhere near South Wales, ok butt

Post Wed Jul 04, 2012 9:09 am

A word of warning, the BMW ones are the cork ones. I ordered two thinking BMW would sell the superior paper type ones, but not. I'm sure they will last a good while, long enough for me to forget what a cr4p job it is to do with the engine in situ at least :D

I was thinking of using a sealant, as, used correctly, I think this would last very well. The key words here are "used correctly".

Sorry for not being more help.
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Wed Jul 04, 2012 9:12 am

Yeah, i just fitted a BMW one and it was a feeble little cork thing too. Having read through the archives, I'll now be going back and fitting a bead of sealant around it too.
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Wed Jul 04, 2012 5:49 pm

Liquid stalent used properly is fine. Few oil pan flanges are still flat 20 years down the line.
(damn auto correct)
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
User avatar
aimlessrock
E30 Zone Squatter
E30 Zone Squatter
Posts: 1821
Joined: Sun Dec 06, 2009 11:00 pm
Location: Manchester

Post Wed Jul 04, 2012 8:11 pm

when i re-did mine i used both gasket and locktite sealer as the gasket looked a little feeble (oem)..Maggs on a 6 pot its a horrid job to do..i resorted to lifting the engine of its mounts to clear the crossmember...shite job.
E30 320i Convertible (1989)
190 Mercedes (1988)

"there is nothing more expensive than a cheap E30"
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Wed Jul 04, 2012 8:24 pm

Use the card one. I think Payen do them but it's easy toake one from thick gasket paper. Also use theadlock on the sump bolts so they don't work loose.
scott180gtb
E30 Zone Camper
E30 Zone Camper
Posts: 1251
Joined: Thu Mar 26, 2009 11:00 pm
Location: Yorkshire

Post Wed Jul 04, 2012 9:19 pm

I managed to get the sump off this afternoon. Half the bolts on the drivers side were hand tight 8O 8O

There is loads of info on the net saying that you have to lift the engine to get the sump off. All I have done is remove the steering rack and hey presto. :D

Paper gasket and lock thread as Andy recommended. If it leaks I can always ream him at the pod!
Cars

2007 VW Caravelle 2.5 TDI 250 bhp 550 NM
1989 325i Sport Gone :(
2003 E46 320d Touring
1998 E36 M3 EVO Track Toy
1996 E36 328i Sport welder-up project
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Wed Jul 04, 2012 9:39 pm

Words. Just words you bitch.
spook
League two here we come !!!
Posts: 7583
Joined: Sat Aug 19, 2006 11:00 pm
Location: portsmouth

Post Wed Jul 04, 2012 10:28 pm

Ive done the sump gasket with the engine in the car, its not much fun trying to feed the oil pump feed pipe back in, but its do able. :D
Image