Hose Clamps
Moderator: martauto
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
Bit of a long shot but I don't suppose anyone would have a list of all hose clamps and sizes handy? I want to renew all mine around the bay and where ever else they are used for stainless ones.
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
I reckon you're going to be trawling RealOEM mate, think thats lists the sizes in mm. The standard ones seem to hold up well enough against rust though.
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
I thought I might have to
I'll do it this evening if no one comes up with anything. I've not really looked at the ones used to see what they are like. I bought some wrong clamps that I'm returning and want to get different ones instead that will fit.
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
I've bought all new from BMW and they're really good quality, not like cars like ours are going to see much winter driving like the originals or get covered in that nasty lacquer so should look good for a long time.
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
They're probably a similar price to behonest - BM Mini Parts have a couple for example here & here
That second one is have you see used on exhausts

That second one is have you see used on exhausts
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
Their not badly priced at all! Are the bmw ones stainless or are they coated in some way to prevent corrosion?
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
I understand that the BMW-supplied hose clamps are stainless steel with the BMW logo stamped on.
I buy s/s clamps from my local factor in boxes of ten,the spares are bound to come in handy one day!
I buy s/s clamps from my local factor in boxes of ten,the spares are bound to come in handy one day!
Youth is wasted on the young.
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
I'm pretty sure they're stainless as well.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
BMW OE have stainless bands, but a plated worm and cage. The only ones that should show any signs of corrosion are the ones on the fuel lines under the car, and for these I keep a stock of all stainless clips of the correct size.
The more usual reason for replacing an E3O hose clip is that some muppet has been fitting or removing it with a flat blade screwdriver instead of a hex. driver.
The more usual reason for replacing an E3O hose clip is that some muppet has been fitting or removing it with a flat blade screwdriver instead of a hex. driver.
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Brianmoooore wrote: The more usual reason for replacing an E3O hose clip is that some muppet has been fitting or removing it with a flat blade screwdriver instead of a hex. driver.
Guilty,m'lord as charged....
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
I am by no means a brainwashed BMW disciple but OE all the way for me , excellent quality and they look and fit right. Few things offend me more than an underbonnet diahorrearama of Morris Ital and Ledbury Maestro hose clips !
Don't even get me started on those peasants who fit hose clips without the the 'heads' lining up or
on the same side !

Don't even get me started on those peasants who fit hose clips without the the 'heads' lining up or
on the same side !
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
I used all stainless when I did the hoses on my track car, cant remember the exact brand


Will check for brand and sizes tomorrow.
I also dislike most non bmw hose clips, especially springy french fckers


Will check for brand and sizes tomorrow.
I also dislike most non bmw hose clips, especially springy french fckers
-
Jozi
- E30 Zone Addict

- Posts: 3076
- Joined: Thu Nov 22, 2007 11:00 pm
- Location: Dublin, Ireland
So it's BMW for any underbonnet ones and stainless everywhere else then 
-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
Blue silicon hoses are so very Sierra Councilsworth.DanThe wrote:I used all stainless when I did the hoses on my track car, cant remember the exact brand
Will check for brand and sizes tomorrow.
I also dislike most non bmw hose clips, especially springy french fckers
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Yes, they are fordtastic but they are cheap and purposeful, not that you see them, if I could have had them in black for the same money there would have been no questions! 


