Dash buttons.
Moderator: martauto
-
cee
- E30 Zone Regular

- Posts: 983
- Joined: Sun Aug 23, 2009 11:00 pm
- Location: Plymouth
Above the head unit there are the emergency blinker and rear window heater buttons, and on my car two blanks. What is fitted in the space of the two blanks on other models? I have a sneaky plan for a spare button...

1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
-
adz79
- E30 Zone Newbie

- Posts: 107
- Joined: Sat Dec 20, 2008 11:00 pm
- Location: Plymouth
Turbo boost and oil slick or on cabs an ejector seat. 
-
Speedtouch
- Old Skooler

- Posts: 14129
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Depends on model; some are for a stereo fader control, others electric rear window child safety cut-off switch:


I built a digital LED display into mine, to indicate which gear I was in!


I built a digital LED display into mine, to indicate which gear I was in!
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
cee
- E30 Zone Regular

- Posts: 983
- Joined: Sun Aug 23, 2009 11:00 pm
- Location: Plymouth
I have an LED for the alarm in one, and I have the electric window 'lock' button down above the drivers side window control by the gear knob, but I guess I could fit another up there for the purpose I'm thinking of...
Alternatively, looking at your photos, I could fit the extra climate control buttons and use one of those...
Alternatively, looking at your photos, I could fit the extra climate control buttons and use one of those...
Last edited by cee on Tue Jul 03, 2012 11:45 pm, edited 1 time in total.

1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
-
cee
- E30 Zone Regular

- Posts: 983
- Joined: Sun Aug 23, 2009 11:00 pm
- Location: Plymouth
If only!adz79 wrote:Turbo boost and oil slick or on cabs an ejector seat.

1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
Get an m20, go faster that the m42 so no need for the boost and the oil slick comes as standard with them.cee wrote:If only!adz79 wrote:Turbo boost and oil slick or on cabs an ejector seat.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
in my old is, i fitted a fog light 2 button switch in there , wired to the remote leads for the sub and electric ariel- so could turn both on/off at a button
-
cee
- E30 Zone Regular

- Posts: 983
- Joined: Sun Aug 23, 2009 11:00 pm
- Location: Plymouth
Cool idea - the fog buttons would work well as they're plain. Thing is for what I want, I want it to look OEM, so I think the climate controls would be the best bet.

1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
-
ajay
- E30 Zone Camper

- Posts: 1041
- Joined: Fri Nov 24, 2006 11:00 pm
All cabs with electric roofs have the switch mouned there.
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
thats why i used them, plain, and 2 in 1 switch, looked oem, was cool to have the ariel push button operated, as i rarley used it,it annoyed me going up/down every time the key was turnedcee wrote:Cool idea - the fog buttons would work well as they're plain. Thing is for what I want, I want it to look OEM, so I think the climate controls would be the best bet.
and the sub switch a quick cut off for it when on phone or late at night etc, without having to do it via the stereo
-
Speedtouch
- Old Skooler

- Posts: 14129
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
For anyone wanting to fill up their vacant slots
, I have the following E30 switches available:
Stereo fader control
Hazard warning switch
Heated rear window switch
Twin fog light switch (plain black, no markings)

Stereo fader control
Hazard warning switch
Heated rear window switch
Twin fog light switch (plain black, no markings)

Last edited by Speedtouch on Sun Jul 15, 2012 11:06 am, edited 1 time in total.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
Speedtouch
- Old Skooler

- Posts: 14129
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
The above switches are now on E-bay, ending tonight, if anyone is interested:
http://www.ebay.co.uk/itm/BMW-E30-Dashb ... 3f19b136e5
http://www.ebay.co.uk/itm/BMW-E30-Dashb ... 3f19b136e5
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
cypriot_boy_2k7
- E30 Zone Squatter

- Posts: 1641
- Joined: Mon Jan 29, 2007 11:00 pm
how did you do that? you also have PMSpeedtouch wrote:
I built a digital LED display into mine, to indicate which gear I was in!
-
cee
- E30 Zone Regular

- Posts: 983
- Joined: Sun Aug 23, 2009 11:00 pm
- Location: Plymouth
There was also a post on here a while ago where someone built one into the service indicator lights. Was pretty cool!cypriot_boy_2k7 wrote:how did you do that? you also have PMSpeedtouch wrote:
[img]
I built a digital LED display into mine, to indicate which gear I was in!

1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Best use for one of the spare switch positions is a petrol/LPG changeover switch. AEB Leonardo one, if fitted along with a couple of slivers off of the ends of the blank that you removed (switch is slightly short) looks absolutely OE.
-
Speedtouch
- Old Skooler

- Posts: 14129
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
I actually built it for a magazine article (May 1997 issue of Electronics and Beyond - The Maplin magazine). It used Hall effect sensors to detect the position of the gearstick, and used a logic circuit to generate a corresponding LED display output to show which gear you were in:cypriot_boy_2k7 wrote:how did you do that? you also have PMSpeedtouch wrote:
I built a digital LED display into mine, to indicate which gear I was in!





///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
