Didn't expect this today

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Green
E30 Zone Squatter
E30 Zone Squatter
Posts: 1698
Joined: Wed Mar 17, 2010 11:00 pm
Location: Santa Pod

Post Fri Jun 29, 2012 8:18 pm

I thought as it was a nice day it'd be a good chance to switch my diff over to a LSD. I thought removing the driftshafts would've been the most painful part but turns out one of the bolts that hold the diff on to the subframe was the hard part until I noticed a lot of movement when I was trying to undo it.

To my suprise it was totally loose, so I removed the jack and popped the diff down and confirmed my concerns...

Image

The area around the left mount for the diff has come away 8O as an added bonus I didn't have the 2 bolts in at the top either!

I put the subframe on last year as the old one got damaged and it was more then solid enough and hammerited for protection at the time, is this a common thing to happen or have I been unfortunate with this?
I really can't be bothered to change a whole beam this year -_-
Image
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Fri Jun 29, 2012 8:42 pm

that's bad :eek:

you would've been aware of it for a while by the looks of it,all you had to do was tighten the bolts up with some thread lock on them .

needs a new beam now though,i wouldn't blag it with three bolts .
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
User avatar
harry_p
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5313
Joined: Thu Oct 12, 2006 11:00 pm
Location: norfolk

Post Fri Jun 29, 2012 8:44 pm

I'd guess the top two bolts have worked loose and vanished, so it's only the two lower and the rear bush locating it. Under acceleration it will try and twist anticlockwise ( looking from the rear ) which has pulled down on, fatigued and cracked the subframe around the one remaining left hand bolt.
cheers,

harry
BATTS91
E30 Zone Squatter
E30 Zone Squatter
Posts: 1764
Joined: Sat May 01, 2010 11:00 pm
Location: clacton on sea essex

Post Fri Jun 29, 2012 8:56 pm

jeepers :/ :eek:
adit
Married to the E30 Zone
Married to the E30 Zone
Posts: 13727
Joined: Wed Jun 20, 2007 11:00 pm
Location: portsmouth

Post Fri Jun 29, 2012 8:58 pm

the car behind would certainly know it if you dumped that on the tarmac!
Image

E30 Parts Galore!! 07901 888019

[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
Green
E30 Zone Squatter
E30 Zone Squatter
Posts: 1698
Joined: Wed Mar 17, 2010 11:00 pm
Location: Santa Pod

Post Fri Jun 29, 2012 9:37 pm

magpie wrote:that's bad :eek:

you would've been aware of it for a while by the looks of it,all you had to do was tighten the bolts up with some thread lock on them .

needs a new beam now though,i wouldn't blag it with three bolts .
Wasn't aware that it had destroyed the mounting area at all, infact barely aware there was a problem. I'd very rarely get a judder accelerating up to 20mph which developed maybe a 4 or 5 months ago, I investigated this before the MOT ran out in May and saw some movement in the diff bush and assumed it needed replacement.

I had the whole beam changed last year at a garage and some people may remember when I posted back in october about a bad vibration which turned out to be all my bolts coming out and my local garage unable to detect that as the problem (http://www.e30zone.net/modules.php?name ... 00&start=0)

I wasn't actually aware of the two other bolts higher up, and now unsure if they were still there. I had threadlocked the new bolts in as to not repeat the same problem but looks like this is a bit worse.

I haven't driven it for nearly 2 months now and was looking to get the MOT and that sorted for next week but this as said above can't really be left without a bolt in it. Just wasn't looking to pay for anything extra during this :cry:
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Jun 29, 2012 11:55 pm

Green wrote:....... and hammerited for protection at the time,
This could be relevant. Hammerite is a very thick paint, and paint between mating surfaces that are bolted together is bad news.
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Sat Jun 30, 2012 12:06 am

Could you not weld in some new metal and drill it, rather than replace the whole subframe?
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Jun 30, 2012 2:25 am

I posted a while back,now,that after a diff change/rear beam change that involved removing the diff that those bolts MUST be checked for;
a.Tightness
b.That they are in fact in place.

I would expect that an un-disturbed diff will be OK,but it's so difficult to get any real torque on the diff bolts that I feel it is essential to check them for tightness at least once every 6 months.

That rear beam is scrap,now! :(
Youth is wasted on the young.
Green
E30 Zone Squatter
E30 Zone Squatter
Posts: 1698
Joined: Wed Mar 17, 2010 11:00 pm
Location: Santa Pod

Post Sat Jun 30, 2012 3:27 pm

Speedtouch wrote:Could you not weld in some new metal and drill it, rather than replace the whole subframe?
I had seriously thought about that rather then have to remove everything. I'd have thought as long as the weld is good it'll be fine (especially with all 4 bolts in place -_-) but I feel that will be prolonging the inevitable... Seeing as it's on the last day of tax and hasn't moved since May I'm half tempted to SORN it off to deal with it properly and sort some rot out. It's a shame as I wanted it on the road for the short sun we'll get :(
Image
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Sat Jun 30, 2012 9:58 pm

I'm sure that if you used a sturdy repair section and welded it in nicely, it would be durable enough.
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
Morat
E30 Zone Team Member
E30 Zone Team Member
Posts: 8943
Joined: Thu Feb 09, 2006 11:00 pm
Location: The Peoples Republic of Yorkshire

Post Sat Jun 30, 2012 10:04 pm

But a replacement beam, with a bit of sand blasting and powdercoating... £200?
E30 Touring 0.35 cD - more slippery than prison soap :)

Image
Praise the Lard... and pass the dripping!
Finto_316
E30 Zone Regular
E30 Zone Regular
Posts: 421
Joined: Tue Apr 06, 2010 11:00 pm
Location: Ireland,Louth

Post Sat Jun 30, 2012 10:19 pm

Ive had a similar problem on my project, Took off the beam the scrapper im using, And the top bolt holes were cracked to the edge and diff backing case was cracked :o Have had them welded professionally though and job seems a goodn :D
Image
BMW e30 325i Sport-88-Diamond Shwartz
User avatar
andyp
True Old Skooler
Posts: 6899
Joined: Sun Jan 09, 2005 11:00 pm
Location: LONDON

Post Sat Jun 30, 2012 11:19 pm

ive got a nice beam here with excellent bushes in should you need it.