e30 lowering
Moderator: martauto
-
Vandi
- E30 Zone Newbie

- Posts: 5
- Joined: Mon Jul 25, 2011 11:00 pm
hi was wondering if anyone can help me,i have an e30 325i with the bilstien b12 kit and want a little bit more lowering without changing the spring or shocks because i love the ride any ideas anyone?
-
Kos
- E30 Zone Team Member

- Posts: 15448
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
on the front or back ?
if its on the front, you can use a thinner spring pad. they come in 9mm and 3mm.
same applies to the rear, the come in 5 7.5 and 10mm
if its on the front, you can use a thinner spring pad. they come in 9mm and 3mm.
same applies to the rear, the come in 5 7.5 and 10mm
-
Vandi
- E30 Zone Newbie

- Posts: 5
- Joined: Mon Jul 25, 2011 11:00 pm
want about 10-15mm at the front if possible. spring pads? do you have a link ?
-
Kos
- E30 Zone Team Member

- Posts: 15448
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
The pads are the rubber bit the spring rests on in the base of the cup.
You can also use e90 top hats which can lower 15mm. They sit between the spring and top mount. never don't it my self but a few others have
Can't post any links as im replying on my phone.
You can also use e90 top hats which can lower 15mm. They sit between the spring and top mount. never don't it my self but a few others have
Can't post any links as im replying on my phone.
-
Kos
- E30 Zone Team Member

- Posts: 15448
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
NP 
