Improving the m20b20 with m20b25 parts?
Moderator: martauto
-
george101
- E30 Zone Newbie

- Posts: 113
- Joined: Fri Apr 20, 2012 11:00 pm
Just wondering if m20b25 parts can be used on an m20b20 to increase performance or just improve the engine?
Thanks
Thanks
-
Sanchez
- Married to the E30 Zone

- Posts: 7578
- Joined: Sun Apr 17, 2005 11:00 pm
- Location: Sunny Scotland
Inlet Manifold, TB, airbox.
but then you may aswell use the hole thing.
but then you may aswell use the hole thing.
-
george101
- E30 Zone Newbie

- Posts: 113
- Joined: Fri Apr 20, 2012 11:00 pm
I would use tho whole thing is it wasn't broken ha. Just wanna know what bits I could take off it, so I could fit to my 2.0 what about the injectors?Sanchez wrote:Inlet Manifold, TB, airbox.
but then you may aswell use the hole thing.
-
Sanchez
- Married to the E30 Zone

- Posts: 7578
- Joined: Sun Apr 17, 2005 11:00 pm
- Location: Sunny Scotland
Think the injectors are different.
They are different part numbers.
They are different part numbers.
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Pointless, a bit like a 320 engine 
-
george101
- E30 Zone Newbie

- Posts: 113
- Joined: Fri Apr 20, 2012 11:00 pm
Was just wondering, before it goes.
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
a) it's pointless. You can't improve an M20b20.
b) the dead M20B25 you have is so old that its parts will be incompatible with most other engines you find. The injectors will have the wrong impedance for a start.
b) the dead M20B25 you have is so old that its parts will be incompatible with most other engines you find. The injectors will have the wrong impedance for a start.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
just buy a good m20 b25 and enjoy 50bhp more power with the same fuel consumption .

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Or go straight to M52B28, and enjoy 70 - 90 bhp more with improved fuel consumption.magpie wrote:just buy a good m20 b25 and enjoy 50bhp more power with the same fuel consumption .
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
I was wanting to do the same. Use the 2.5 intake and bigger cam but the power gains for what would be abismal fuel consumption isnt worth it. Il wait til im 20/21 then just man up and m52 it
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
BATTS91
- E30 Zone Squatter

- Posts: 1764
- Joined: Sat May 01, 2010 11:00 pm
- Location: clacton on sea essex
m20's are past it in my opinion , unless fully rebuilt or turbo , m50/52 is soo much better , save ya pennys and get ond in plenty of help and parts here , that goes for you aswell euan ! do it asap
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
might be worth pulling the pistons out however as you might get £50 for them if they are high comp.
take the sump off and keep it as spare, stick the loom etc on ebay.
take the sump off and keep it as spare, stick the loom etc on ebay.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
Don't tell me - he's replacing the shagged 325i engine with a 320i donk?
Only this guy would do that..................
Only this guy would do that..................
-
gman1
- E30 Zone Newbie

- Posts: 245
- Joined: Wed May 16, 2012 11:00 pm
Or replace it with an m42 engine!!!!!!?? 
-
Captain_Birdseye
- E30 Zone Regular

- Posts: 874
- Joined: Sun Mar 25, 2012 11:00 pm
- Location: Bristol (and Cheltenham)
does the 2.0 sound better than the 2.5? I'd have a vrooooom over 50bhp any day.
-
Speedtouch
- Old Skooler

- Posts: 14130
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
The B20 is super-smooth and sounds good at high revs, but they do lack low-down torque. One often overlooked advantage is that the 731 heads tend to be more durable than the 885 head on the 325i, and less prone to cracking.
You can use the 325i (173/380) ECU, fitted with a 320i chip, although I've heard of people running them with the 325i chip - whether this is effective or not, I don't know...
You can use the 325i (173/380) ECU, fitted with a 320i chip, although I've heard of people running them with the 325i chip - whether this is effective or not, I don't know...
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
Captain_Birdseye
- E30 Zone Regular

- Posts: 874
- Joined: Sun Mar 25, 2012 11:00 pm
- Location: Bristol (and Cheltenham)
My recent overheat seems to have not managed to damage my head on my B20.
