Hi all,
My 318is baur is making a "screeching" sound when turning the steering wheel when parked.....i was told the power steering belt needs tightening?..
Can anyone tell me which belt it is and a rough guide on how to do it????..
Many thanks...
power steering belt?
Moderator: martauto
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
the p/s beltis the front one nearest the rad,it has a 13mm nut locking a 19mm [spanner size] adjusting nut that when turned will tighten or slacken the belt .

no's 12 and 13 ,don't forget to tighten 13 when done

no's 12 and 13 ,don't forget to tighten 13 when done

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
if the pump is on it's way out i have a few for sale.

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
gman1
- E30 Zone Newbie

- Posts: 245
- Joined: Wed May 16, 2012 11:00 pm
Ok thankyou.....i'll have a look when i get chance...
-
DHFiS
- Old Skooler

- Posts: 2733
- Joined: Sat Aug 12, 2006 11:00 pm
- Location: cambridge
Ease off the bolt the pump pivots on whilst moving it with part 12 in the diagram above
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
8,10 and 13 should all be slackened off very slightly, and the adjustment made by turning 12.
Only slacken 13 just enough to let 12 wind along the rack (9), or the teeth on 13 will slide off of the matching teeth on 9, damaging both parts.
Tighten all that you slackened to complete the job.
Only slacken 13 just enough to let 12 wind along the rack (9), or the teeth on 13 will slide off of the matching teeth on 9, damaging both parts.
Tighten all that you slackened to complete the job.
