rebuild TB into BBTB..pictures of my fooked one

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Miris325i
E30 Zone Newbie
E30 Zone Newbie
Posts: 242
Joined: Fri Feb 26, 2010 11:00 pm
Location: Bangor, NI

Post Mon Jun 25, 2012 1:10 am

Hi as a topic does anybody knows some1 who is able to do that...2guys already let me down, so pls only who can do it for sure :wink:

Thanks a lot
Miris
Last edited by Miris325i on Tue Jun 26, 2012 4:16 pm, edited 1 time in total.
1988 327i M-tech II...stolen
1993 316i touring...V8 build
Green
E30 Zone Squatter
E30 Zone Squatter
Posts: 1698
Joined: Wed Mar 17, 2010 11:00 pm
Location: Santa Pod

Post Mon Jun 25, 2012 1:19 am

Any local engineering place should be able to do it for you, have you tried that?
Image
Miris325i
E30 Zone Newbie
E30 Zone Newbie
Posts: 242
Joined: Fri Feb 26, 2010 11:00 pm
Location: Bangor, NI

Post Mon Jun 25, 2012 11:38 am

Green wrote:Any local engineering place should be able to do it for you, have you tried that?
Nope m8, i didn't think about that....whats a "diameter" of BBTB?

Cheers
1988 327i M-tech II...stolen
1993 316i touring...V8 build
User avatar
PeteE30Tourer
E30 Zone Camper
E30 Zone Camper
Posts: 1317
Joined: Tue Dec 21, 2004 11:00 pm
Location: Dorset

Post Mon Jun 25, 2012 12:42 pm

Have you read the Wiki article?

http://www.e30zone.net/e30zonewiki/inde ... tle_Bodies

There used to be a guy on here that did it for you for around £120 i think - Ian someone.
Image
Back behind an M20, but now I can hear it better.
Miris325i
E30 Zone Newbie
E30 Zone Newbie
Posts: 242
Joined: Fri Feb 26, 2010 11:00 pm
Location: Bangor, NI

Post Mon Jun 25, 2012 1:19 pm

Thanks Ian, yep i read that, but it doesn't say how much metal u can take off(have to find my old fooked BBTB and check it)...and £120 its quite expensive as i heard it should be done for £60-80.
1988 327i M-tech II...stolen
1993 316i touring...V8 build
scjimbo
E30 Zone Camper
E30 Zone Camper
Posts: 1249
Joined: Thu Feb 09, 2012 11:00 pm
Location: Gloucester

Post Mon Jun 25, 2012 1:57 pm

If you can post/pm me some pictures and sizes of what you want done i would be happy to give you a quote to do it for you as long as we have the kit here.
maggspower
Turbo Farmer Tractor Driver
Posts: 2376
Joined: Wed Oct 12, 2005 11:00 pm
Location: Nowhere near South Wales, ok butt

Post Mon Jun 25, 2012 2:01 pm

The throttle can be taken out to 64mm. If you think £120 is expensive then don't look at this link:

http://www.ca-int.co.uk/products-Y2FyX2 ... kPTg=.html

And if you can get it done properly for £60-80 I say go for it.

There is alot of work involved, take the thing apart bore it to the correct size, then mill the slot in the spindle to accept a larger butterfly, next make a new butterfly using a custom jig so you can taper it the 4 degrees required (a throttle butterfly is not round), finally put it all back together while trying not to have a spring related eye removal situation :D
Miris325i
E30 Zone Newbie
E30 Zone Newbie
Posts: 242
Joined: Fri Feb 26, 2010 11:00 pm
Location: Bangor, NI

Post Mon Jun 25, 2012 2:25 pm

maggspower wrote:The throttle can be taken out to 64mm. If you think £120 is expensive then don't look at this link:

http://www.ca-int.co.uk/products-Y2FyX2 ... kPTg=.html

And if you can get it done properly for £60-80 I say go for it.

There is alot of work involved, take the thing apart bore it to the correct size, then mill the slot in the spindle to accept a larger butterfly, next make a new butterfly using a custom jig so you can taper it the 4 degrees required (a throttle butterfly is not round), finally put it all back together while trying not to have a spring related eye removal situation :D
Thanks for that!! Do u think they could use my fooked BBTB as donor?? picture follow :wink:
1988 327i M-tech II...stolen
1993 316i touring...V8 build
maggspower
Turbo Farmer Tractor Driver
Posts: 2376
Joined: Wed Oct 12, 2005 11:00 pm
Location: Nowhere near South Wales, ok butt

Post Mon Jun 25, 2012 2:27 pm

What is wrong with it?
Miris325i
E30 Zone Newbie
E30 Zone Newbie
Posts: 242
Joined: Fri Feb 26, 2010 11:00 pm
Location: Bangor, NI

Post Mon Jun 25, 2012 3:17 pm

When i get my 2.7stroker i found out that BBTB is fooked. That spring on top of body came off (during the delivery must hit something hard or i don't know)...will find picture for better explain :wink:
1988 327i M-tech II...stolen
1993 316i touring...V8 build
Miris325i
E30 Zone Newbie
E30 Zone Newbie
Posts: 242
Joined: Fri Feb 26, 2010 11:00 pm
Location: Bangor, NI

Post Tue Jun 26, 2012 4:13 pm

maggspower wrote:What is wrong with it?
That's wrong...i don't think its repairable...or is it? :roll:

Image
Image
Image[/img]
1988 327i M-tech II...stolen
1993 316i touring...V8 build
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Tue Jun 26, 2012 4:18 pm

That's scrap.
maggspower
Turbo Farmer Tractor Driver
Posts: 2376
Joined: Wed Oct 12, 2005 11:00 pm
Location: Nowhere near South Wales, ok butt

Post Tue Jun 26, 2012 4:25 pm

Andyboy wrote:That's scrap.
Indeed :D

Dont throw it away though.

PMed
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Tue Jun 26, 2012 4:32 pm

At leat you can salvage the butterfly and just get your other TB bored out for it to fit.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Miris325i
E30 Zone Newbie
E30 Zone Newbie
Posts: 242
Joined: Fri Feb 26, 2010 11:00 pm
Location: Bangor, NI

Post Wed Jun 27, 2012 10:14 am

Kedge wrote:At leat you can salvage the butterfly and just get your other TB bored out for it to fit.
same thinkin :D I just came back from post office, u should get that TB in 2days :wink:
1988 327i M-tech II...stolen
1993 316i touring...V8 build