Does anybody know how much these are from the dealer and if they are nla or on back order etc?
Cheers
Numberplate light covers
Moderator: martauto
-
Blitz
- Married to the E30 Zone

- Posts: 11151
- Joined: Mon Jan 30, 2006 11:00 pm
- Location: East London+Basildon
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Buy yourself some stainless self tappers to go with them as well.
-
kitch
- E30 Zone Regular

- Posts: 878
- Joined: Sat Nov 01, 2008 11:00 pm
I've got some stainless screws at home that I'll now be using. Cheers

-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
And dont forget to chuck some waxoil around before you put them in 
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
The screws go into plastic inserts, so they won't be cutting into painted metal. The area is still prone to rust though.DanThe wrote:And dont forget to chuck some waxoil around before you put them in
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
No but the sharp edge of the cut out is one of the most likely places for an E30 to rust, and the plastic inserts still push into the sharp edged steel and can hold water
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
what would you suggest for putting in a brand new rear panel ? i need to buy new fittings,what size screw is it where can you get stainless ones from ? any other rust prevention ideas there ?Brianmoooore wrote:The screws go into plastic inserts, so they won't be cutting into painted metal. The area is still prone to rust though.DanThe wrote:And dont forget to chuck some waxoil around before you put them in
-
kitch
- E30 Zone Regular

- Posts: 878
- Joined: Sat Nov 01, 2008 11:00 pm
I'm having a full respray atm and have bought 7litres of waxoyl for after it. I'll be sure to remember that little bit, thanks.DanThe wrote:And dont forget to chuck some waxoil around before you put them in

-
mcbonio
- E30 Zone Squatter

- Posts: 1868
- Joined: Sun Feb 12, 2012 11:00 pm
I replaced mine not so long ago, the screws were that corroded the heads looked like finishing pins. I had to smash through the lights and pry them all out piece by piece.!
Tided the tail end up nice though.!
Tided the tail end up nice though.!
