Hi. How do you change the input shaft seal on an m42 gearbox please? Inside of my bellhousing is soaking so while its out its a must that I do it now.
There are about 6 10mm bolts holding a housing on..... Is it this whole housing bmw supply with a gasket? As I've ordered one and its 31 quid
Help with this appreciated as I've never done one before
Thanks
input shaft seal on an m42 gearbox?
Moderator: martauto
-
e30-EVN
- Old Skooler
- Posts: 3382
- Joined: Sun Dec 13, 2009 11:00 pm
- Location: S.Wales
A 2 door e30 with 8 cylinders, what could be better 
-
e30-EVN
- Old Skooler
- Posts: 3382
- Joined: Sun Dec 13, 2009 11:00 pm
- Location: S.Wales
Anyone?
A 2 door e30 with 8 cylinders, what could be better
-
town325i
- E30 Zone Team Member
- Posts: 7050
- Joined: Thu Jun 26, 2008 11:00 pm
- Location: cannock staffordshire
cheaper option would be to but an m42 gearbox that has no issuse with it which i have in stock. its had new rear seals which cost me 45 from the dealers and the gearbox its self dont leak at all now
-
e30-EVN
- Old Skooler
- Posts: 3382
- Joined: Sun Dec 13, 2009 11:00 pm
- Location: S.Wales
Many thanks pm sent
A 2 door e30 with 8 cylinders, what could be better