Carpet Removal

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Mo13
E30 Zone Regular
E30 Zone Regular
Posts: 722
Joined: Tue Apr 03, 2012 11:00 pm
Location: East London

Post Tue Jun 19, 2012 4:03 pm

Hi Ive had a little dig under the carpet of my cab passenger side is dry but the driver side is moist! 8O . Had a little poke around and the screw driver went through a little rust spot :(

My question is do I have to take out the dash in order to remove the carpet?

Thanks
FinalD
E30 Zone Camper
E30 Zone Camper
Posts: 1098
Joined: Wed Apr 25, 2012 11:00 pm
Location: Bristol

Post Tue Jun 19, 2012 4:06 pm

You don't have to but it helps when removing the carpet around the HVAC area. I'd already removed the dash from mine when I pulled the carpet and I'll be putting the dash back once the carpet is back, not before, just to ensure I've got maximum space to clamber about.

The nice thing about removing it on the cab is that you can stand in the car an haul the bugger about and so you can get it out from under the HVAC without having to cut it out. :cool:


Link to my Carpet removal post. :)
Mo13
E30 Zone Regular
E30 Zone Regular
Posts: 722
Joined: Tue Apr 03, 2012 11:00 pm
Location: East London

Post Tue Jun 19, 2012 4:20 pm

FinalD wrote:You don't have to but it helps when removing the carpet around the HVAC area. I'd already removed the dash from mine when I pulled the carpet and I'll be putting the dash back once the carpet is back, not before, just to ensure I've got maximum space to clamber about.

The nice thing about removing it on the cab is that you can stand in the car an haul the bugger about and so you can get it out from under the HVAC without having to cut it out. :cool:


Link to my Carpet removal post. :)
Thanks, I have read through your post and its impressive! GREAT STUFF I was just trying to find an easy way out don't fancy tacking all those wires!
FinalD
E30 Zone Camper
E30 Zone Camper
Posts: 1098
Joined: Wed Apr 25, 2012 11:00 pm
Location: Bristol

Post Tue Jun 19, 2012 4:25 pm

You should (read: can) be able to do it without removing the dash, I wanted the dash out anyway so seemed logical to do it before.

As I say though, much easier in the cab as you can drop the roof and stand there scratching your head trying to work out how to get it out. It did take me a while to moving it about to get it out from under the HVAC unit, I was about to cut the carpet out then thought "one last try" and got it out without cutting.
Mo13
E30 Zone Regular
E30 Zone Regular
Posts: 722
Joined: Tue Apr 03, 2012 11:00 pm
Location: East London

Post Tue Jun 19, 2012 5:21 pm

I shall try getting to the rust spot with a grinder lifting the carpet up and covering it with a fire blanket....if that doesn't work Ill just have to bite the bullet and strip it :?
E30BeemerLad
Married to the E30 Zone
Married to the E30 Zone
Posts: 16806
Joined: Mon Mar 28, 2005 11:00 pm
Location: Norfolk

Post Tue Jun 19, 2012 5:55 pm

I would take the carpet out dude, when you come to weld the hole up or patch in some plate, it'll be a nightmare.

You don't need to remove the dash, just the centre console and the seats, front kick plates, accelerator pedal needs to be undone from the mechanism etc.