
well my new wheel arrived....
Moderator: martauto
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
revealing what looks like the sketchiest e30 bodge job iv seen on this car. a home made steering wheel boss by the looks. i can see a welded seem and none of the holes line up. thus prompting the question, does anybody have for sale a cheap omp compatible steering wheel boss i can purchase or trade parts for?


Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
nice, but ditch the centre tape! You should know where the wheels are pointing with your eyes closed... 
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
thanks, but its not tape its sown on vinyl. i quite like it anyway. im pissed off my gimpy boss doesnt fit. so car minus a steering wheel til i find another then
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Rich320I
- E30 Zone Camper

- Posts: 1272
- Joined: Tue Dec 06, 2011 11:00 pm
- Location: Worcester
did the boss fit the old wheel or did the car come minus a wheel mate?
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
na man it fitted the nardi it came with alright.
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Rich320I
- E30 Zone Camper

- Posts: 1272
- Joined: Tue Dec 06, 2011 11:00 pm
- Location: Worcester
definately the boss then and not the wheel? just hard to see from the photo thats all.
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
yeah its the boss man, apparently there are a few different patterns.
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
is the centre bore an issue? if not & it's a steel boss, fill the holes with weld, drill & re-tap.. Just make a note of where the indicator canceller is located
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
aaah i could do that. its a fuckin huge boss anyway tbh, il put pictures up give me a minute
my VW driving friends suggested welding it on or using gorilla glue, but seen as im not a ghetto fuck im not following that woeful advice
my VW driving friends suggested welding it on or using gorilla glue, but seen as im not a ghetto fuck im not following that woeful advice
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
as much as I have faith in various glues, fook that.. however if you have 2 screws in there, bonding it would be ok.. Not sure it'd pass an mot tho
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
il just do it properly, i may weld and re tap as u suggested. im naturally the unluckiest person u will ever meet so if theres a 0.001% chance of it coming unstuck if i did glue it, itl happen to me at 120 half way round the nurburgring so il just do it right
holes are just not quite right
boss is huuuuge

holes are just not quite right
boss is huuuuge

Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Rich320I
- E30 Zone Camper

- Posts: 1272
- Joined: Tue Dec 06, 2011 11:00 pm
- Location: Worcester
mate dont glue your steering wheel on that sort of stuff ends up on u-tube.
like barx said weld and retap it for the cheapest solution
like barx said weld and retap it for the cheapest solution
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
i know haha the boy that suggested it drives a lupo dumped on steelies so...that kinda advice flies in that scene i guess.
i found a boss online for 25 i think il get. as u can see the boss is very long and it looks daft as fuck, it does feel pretty good though....decisions decisions
i found a boss online for 25 i think il get. as u can see the boss is very long and it looks daft as fuck, it does feel pretty good though....decisions decisions
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
ross_jsy
- Married to the E30 Zone

- Posts: 7307
- Joined: Sun Jul 12, 2009 11:00 pm
- Location: Jersey, C.I.
Surely with a dished wheel that is sitting too close to your chest?
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
yeah its extremely close. its not even drift position its, beyond that hence why rather than weld il just buy a new bossross_jsy wrote:Surely with a dished wheel that is sitting too close to your chest?
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
Rich320I
- E30 Zone Camper

- Posts: 1272
- Joined: Tue Dec 06, 2011 11:00 pm
- Location: Worcester
lol some people man they suggest some stuff dont they,
yeah i think swerving clear of glueing the wheel on is a top idea, £25's reasonable for a boss that fits, like ross said would make the wheel in a more normal driving postion, unless you have arms like a t-rex.lol
yeah i think swerving clear of glueing the wheel on is a top idea, £25's reasonable for a boss that fits, like ross said would make the wheel in a more normal driving postion, unless you have arms like a t-rex.lol
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
haha i aint no t rex and nor shall i drive like one. i like a drift style upright driving position arms bent sorta thing but the huge boss + the dish on this is fucking hillarious, im on my own just now or i woulda got a picture of how the wheel sits in refrence to the driver
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
redcar
- E30 Zone Squatter

- Posts: 1610
- Joined: Wed Jul 20, 2011 11:00 pm
- Location: Hertfordshire
Problem with a boss and deep dish wheel like that is reaching for the indicator.
The driving position is way way better though. Indicator takes some getting used to though.
The driving position is way way better though. Indicator takes some getting used to though.
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
yeah i noticed haha, u gotta fuckin leap forward for the stalk. il get used to it though. its a much better driving position as u say, much more in control
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
andrew_baran
- E30 Zone Regular

- Posts: 762
- Joined: Fri Feb 12, 2010 11:00 pm
- Location: Leamington Spa
Best wheel boss for the money IMO are from "JJC Race & Rally". Only about £40, and it feels really well made. You can see it's been machined to a high standard.

-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
il get a look at it man. i honestly cannot be bothered spending money on a piece of metal that holds the wheel on, this one will do
http://www.ebay.co.uk/itm/BMW-E30-BOSS- ... 2ebd8f28e9
http://www.ebay.co.uk/itm/BMW-E30-BOSS- ... 2ebd8f28e9
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
andrew_baran
- E30 Zone Regular

- Posts: 762
- Joined: Fri Feb 12, 2010 11:00 pm
- Location: Leamington Spa
Arrrrrgh! NOOOOOO! Don't buy that piece of shit!
It'll end up like this:

It'll end up like this:


-
scjimbo
- E30 Zone Camper

- Posts: 1249
- Joined: Thu Feb 09, 2012 11:00 pm
- Location: Gloucester
PM'd mate
-
Prey
- E30 Zone Regular

- Posts: 359
- Joined: Tue Jun 15, 2010 11:00 pm
- Location: M1 J28
there aren't two sets of holes in the boss at all? they may look all the same but i've had them with different 'stud patterns' in.
-
aimlessrock
- E30 Zone Squatter

- Posts: 1821
- Joined: Sun Dec 06, 2009 11:00 pm
- Location: Manchester
...verde, ive got a stock three spoke steering wheel off an SE you can for postage costs and a small donation to the zone coffers if you want mate, its in great condition.
Might save you from having to steer your car with your chest!
pm me if you intrested mate.
cheers
Gary
Might save you from having to steer your car with your chest!
pm me if you intrested mate.
cheers
Gary
E30 320i Convertible (1989)
190 Mercedes (1988)
"there is nothing more expensive than a cheap E30"
190 Mercedes (1988)
"there is nothing more expensive than a cheap E30"
-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
You know what? There was...I spent 30 quid on a new boss...it arrived... I took the old one off, rotated it and swore very loudly having just wasted cash. Truely a retard moment that i wish id spent 5 minutes extra assessing the old one and saved the $$$Prey wrote:there aren't two sets of holes in the boss at all? they may look all the same but i've had them with different 'stud patterns' in.
Thanks for all the offers guys but I bought that one, how the fuck did it end up like that?
Its in and working well just now

Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
andrew_baran
- E30 Zone Regular

- Posts: 762
- Joined: Fri Feb 12, 2010 11:00 pm
- Location: Leamington Spa
It snapped... clean in half. Looked like was cast, not machined - the splines were terrible!. I'd never recommend anyone risk their lives or their car with one of those ebay turds.

-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
Dammit why did noone tell me before i ordered.
How did it snap? Were you gettin rowdy or did it just do it normally?
How did it snap? Were you gettin rowdy or did it just do it normally?
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
-
andrew_baran
- E30 Zone Regular

- Posts: 762
- Joined: Fri Feb 12, 2010 11:00 pm
- Location: Leamington Spa
Thankfully not while driving. I used my bucket and my wheel to lever myself out the car without thinking, and felt it give way. Trying to remove it the rest of the way snapped it clean in two.
I think i got a particularly bad one from ebay - there was overspray all over the cover, excess material from the casting process, and it looked like it had been thrown around a bit before I even got it. Either way, i had to use a combination of grips, chisels, saws and hammers to get the splined section off my steering column. Not something i'd ever like to do again - lesson learnt. Steering components is one thing i'll never skimp on again.
I think i got a particularly bad one from ebay - there was overspray all over the cover, excess material from the casting process, and it looked like it had been thrown around a bit before I even got it. Either way, i had to use a combination of grips, chisels, saws and hammers to get the splined section off my steering column. Not something i'd ever like to do again - lesson learnt. Steering components is one thing i'll never skimp on again.

-
verde
- Engaged to the E30 Zone

- Posts: 5438
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: The Sticks
This one doesnt look bad atal man, its a really solid piece. Im not too worried about it. Knowing my luck itl snap going into tiergarten on the ring at like 120
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
