E30 dash swap

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
Kenraf
E30 Zone Newbie
E30 Zone Newbie
Posts: 7
Joined: Sat Mar 29, 2008 11:00 pm

Post Sun Jun 17, 2012 7:27 pm

Hi all, got a lovely 325 convertible thats stunning (especially after its respray), been fitting loads of replacement parts that were either missing or broken but been putting off one job I'm worried about. We got a split dash (across the top) and split getting bigger with age and the occasional blast of sunny weather!!

Want to know if its as much of a ball ache as I perceive or fairly straight forward and where can I get some help, tips on how to do it!!??
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sun Jun 17, 2012 7:28 pm

jas025
E30 Zone Regular
E30 Zone Regular
Posts: 395
Joined: Wed Aug 05, 2009 11:00 pm
Location: Back in Essex

Post Sun Jun 17, 2012 7:36 pm

Deja vu here. Looked at the PDF file on the wiki here. Got mine at work ready for a dry weekend to put it in.

Read in several places that it's around a 14 hour job to replace it.

Does anyone know if there are there any cheap clips / etc that regularly snap off that are worth buying in advance from the dealer before starting the job?
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Sun Jun 17, 2012 7:44 pm

14 Hour job to replace a dashboard? Im guessing a typo or your trying to take it out using the medium of dance for that kinda time :mad:
nickso
E30 Zone Addict
E30 Zone Addict
Posts: 4396
Joined: Sat Jul 23, 2005 11:00 pm
Location: Go do that voodoo that you do so welllllllll!!

Post Sun Jun 17, 2012 7:44 pm

Shouldn't be anywhere near 14 hours unless you are completely handless, your first one will obviously take longer than your second.


You may want to invest in a set of heater matrix foam seals as they are usually in pretty shocking condition.
Image

'88 e30 328i M52 track bint.
User avatar
Kenraf
E30 Zone Newbie
E30 Zone Newbie
Posts: 7
Joined: Sat Mar 29, 2008 11:00 pm

Post Sun Jun 17, 2012 7:54 pm

Wow...forgot how popular this website is....only posted my request 20 mins ago!! Cheers for all the input folk...interestingly....no one has said 'dont do it'!!! :?
nickso
E30 Zone Addict
E30 Zone Addict
Posts: 4396
Joined: Sat Jul 23, 2005 11:00 pm
Location: Go do that voodoo that you do so welllllllll!!

Post Sun Jun 17, 2012 7:57 pm

That's cos it's not that difficult to do. The dash is only held in by a few bolts, the rest of it is just removing stuff bolted to the dash.

The link posted above is pretty comprehensive.
Image

'88 e30 328i M52 track bint.
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Sun Jun 17, 2012 7:59 pm

Its not all that much of a job to do in all honesty. Its more daunting just thinking about it. When you actually start, time flies past.


One word of advise is to remove the A pillar trims before you start and install once you finish. Most of the guides I see dont mention this and its extremely easy to damage them when moving the dash in and out.

Also, whats your location, you never know, a local zoner might be willing to give you a hand :cool:
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Sun Jun 17, 2012 8:52 pm

my first dash came out in about an hour, use loads fo ziplock bags (not for drugs but for the screws/bolts etc) you can use any E30 dash as they are all the same with exception of cabs that have a notch cut out for the under screen bracing - i found this the hard way when i fit (or failed) a tin top dash in my cab. Its not hard to modify, i used a junior hacksaw. When you remove your cab dash you should see the notch i mean side by side with tin top dash, its just under the screen near the a Pillar area (but Obviously on the dash itself!)


The foam around the blower always perishes, you can use any foam for the air vents, B&Q or similar should have it.

this site as posted above makes life very easy..

http://home.comcast.net/~cdeegan9/dashb ... ard_1.html

my best tip is to remove the dash from the donor car first, and second best tip is to cover the upper cowl of your steering wheeel in gaffer tape to avoid scratches, last tip is to use white paper tape to hold the vinyl cover onto youtr inner A-pillars so again you dont scratch it. If you can be bothered remove the seats and do a spring clean.

IF you have the donor car side by side with your good car, the i woudl:
A remove dash from donor car, bagging all the parts.
B remove dash from your car, bagging all the parts.
C fit the cracked dash back into the donor car, at least to feel how it slides in and fits to the clips on the lower A pillar (the only tricky part)
D fit new dash to your car using what ever bag has more clips

enjoy.

can be done alone but hard, with two the whole thing should be two hours first time round, i had only a cat for company, she was useless but did meow when i lost various clips.


Image

Image

Image
Image
oomz1975
E30 Zone Addict
E30 Zone Addict
Posts: 2019
Joined: Mon Feb 09, 2009 11:00 pm
Location: London UK

Post Sun Jun 17, 2012 10:25 pm

This is such a satisfying job to do.
Image
User avatar
biggill
E30 Zone Regular
E30 Zone Regular
Posts: 329
Joined: Sun Mar 30, 2008 11:00 pm
Location: Ashford Middlesex

Post Mon Jun 18, 2012 8:30 am

My first dash took roughly 4hrs, when i did the second 1 in my mates car took about 2hr. Two of us doing it.

No way 14hr's unless you plan on having loads of tea breaks & sleeping on the job :D

It's not that hard the main thing is remembering how it goes back together, if in doubt take pictures.

The info you get of fellow zoners and the wiki is spot on, it is a satisfying job having a crack free dash.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Jun 18, 2012 9:31 am

There's a major mistake in this article.
There are two wiring looms that run across the dash from the left hand side, and one of these, the one that is clipped along the top, plugs into the main body loom at a plug and socket next to the accessories socket at the rear left of the glovebox. This plug and socket should be separated, and the upper loom removed with the dash, along with the items connected to it.
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Mon Jun 18, 2012 10:05 am

Ok, I'll see what I can do about it. I can't edit the existing file, so the whole thing will have to be converted into a "proper" wiki page at some point.
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Mon Jun 18, 2012 10:06 am

This job is easier with the windscreen out,as this enables you to get a vertical lift via the 'screen opening to lift the dash off it'd locating tab just forward of the heater box.But this is not essential,if you have no other reason to remove the screen it can be left in!
In the same way,lowering the steery column by removing the security bolts on the body clamp give far more 'wiggle' space.
Front seats out as already stated are essential.

Should take about 2 hours each way.
Youth is wasted on the young.
User avatar
Kenraf
E30 Zone Newbie
E30 Zone Newbie
Posts: 7
Joined: Sat Mar 29, 2008 11:00 pm

Post Tue Jun 19, 2012 6:39 pm

Load of info and encouragement....just what I need to take it on!! Cheers for the heads up ref different cab and hardtop dash...however, I have my junior hack saw at the ready if required!!

As for location...Im just outside Cheltenham in Glos.
User avatar
e30mtech
E30 Zone Regular
E30 Zone Regular
Posts: 430
Joined: Wed Dec 05, 2007 11:00 pm
Location: glenrothes, fife

Post Tue Jun 19, 2012 8:16 pm

its rare to find any job on here that people will say dont do it,

if you haven't had most of your car to pieces you are not a true e30 owner winkeye