M20B25 or M50/52 B25/B28 Help Please

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Tan91
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Fri Jun 20, 2008 11:00 pm
Location: West London

Post Fri Jun 15, 2012 4:34 pm

Hello people, I am thinking of doing a conversion this year and want rid of the M40. Need help on deciding for a conversion.

Is it worth going for the M20B25

OR

A B25/B28 lump out of an E36 with all the needed mods to fit obv.

What is the better option for money and performance not looking for M3 power just looking for a 6-pot change and something with a decent MPG car will be used a few times a week.

Thanks in Advanced!

:cool:
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Fri Jun 15, 2012 4:42 pm

General idea:

500 quid: M20B25

1500 quid: M52B28

Only do a smaller M5x swap if the engine is being given to you for free.
User avatar
bhups
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Tue Nov 06, 2007 11:00 pm

Post Fri Jun 15, 2012 4:49 pm

M52 all day long! Although i would budget £2500 - £3000 for it.
Image
G-Bear
E30 Zone Squatter
E30 Zone Squatter
Posts: 1631
Joined: Wed Mar 12, 2008 11:00 pm
Location: Hertfordshire

Post Fri Jun 15, 2012 5:53 pm

M52 would give better MPG would it not?
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Fri Jun 15, 2012 7:25 pm

^ should do but depends how its driven.
An m50b25 is still a good option rather than an m52.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
Andy325i
E30 Zone Addict
E30 Zone Addict
Posts: 4052
Joined: Mon Jan 10, 2005 11:00 pm
Location: Avon

Post Fri Jun 15, 2012 7:28 pm

24 valve all the way if you have the time/ money or M20B25 for a straight forward conversion. Have a ride in a B28 car :)
Image
M50B25NonVanos & M52B28Vanos Heads for sale. Pm Me.
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Fri Jun 15, 2012 7:35 pm

i can get over 30 mpg out of my m50 and it does a quarter mile in 14.6 secs :D

Iron block none vanos FTW!
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
Tan91
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Fri Jun 20, 2008 11:00 pm
Location: West London

Post Fri Jun 15, 2012 10:43 pm

Yeh this is exactly what I like to hear, any opinions please share them as I would like to change it this year.

Also I know this is a silly request but anybody in the Hounslow, Twickenham, Richmond Slough area running a M50/M52 conversion would love to pop down and see it and maybe a small drive in it lol.

Just that I would be spending money obviously and would like to know what I can potentially have. Just like to get things right the first time as much as possible.

This is great guys really appreciate the help!

:cool:
User avatar
Das_BMW_E30
E30 Zone Newbie
E30 Zone Newbie
Posts: 150
Joined: Fri May 13, 2011 11:00 pm

Post Fri Jun 15, 2012 10:46 pm

S50B32....You Know You Wanna....
User avatar
Das_BMW_E30
E30 Zone Newbie
E30 Zone Newbie
Posts: 150
Joined: Fri May 13, 2011 11:00 pm

Post Fri Jun 15, 2012 10:48 pm

Get Bidding...

http://www.ebay.co.uk/itm/180906744021? ... 1426.l2649

Jus remember the crank is probrably scrap, will have bearing swarf all round the oilways, so will need major refurb....
Tan91
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Fri Jun 20, 2008 11:00 pm
Location: West London

Post Fri Jun 15, 2012 10:49 pm

Das_BMW_E30 wrote:S50B32....You Know You Wanna....
LOL i wish honestly, but not looking for a lot of power trying to keep the costs down. car needs some welding and paint.
Tan91
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Fri Jun 20, 2008 11:00 pm
Location: West London

Post Fri Jun 15, 2012 10:52 pm

Das_BMW_E30 wrote:Get Bidding...

http://www.ebay.co.uk/itm/180906744021? ... 1426.l2649

Jus remember the crank is probrably scrap, will have bearing swarf all round the oilways, so will need major refurb....
sounds good especially with the new vanos, but a lot of issues to be attended to and could quickly bump costs up. Just want a good engine to begin with and stick it in :D

Being a student during uni and trying to sort out a conversion is a bit of a battle for me lol.
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Jun 15, 2012 10:59 pm

S50 conversion = £6000 DIY to do it properly
M52 conversion = £1500 - £2000 DIY to do it properly
Tan91
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Fri Jun 20, 2008 11:00 pm
Location: West London

Post Fri Jun 15, 2012 11:03 pm

DanThe wrote:S50 conversion = £6000 DIY to do it properly
M52 conversion = £1500 - £2000 DIY to do it properly
Yeh M50/M52 I could afford and would be worthwhile for MPG/Fun/Power. Just think M20 is a too old now and if I was to go through with this swap would make sense for an M50/M52 right??
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Fri Jun 15, 2012 11:11 pm

all parts to convert to m50/52 are available from DanThe on here.

you would be best off going e36 rack as an upgrade while your on 8)

have a look here .

http://www.e30zone.net/modules.php?name ... highlight=

just noticed your post Dan. 8)
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
User avatar
bhups
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Tue Nov 06, 2007 11:00 pm

Post Sat Jun 16, 2012 2:22 am

Im near you Tanveer but my cars off the road at the moment.
Image
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Sat Jun 16, 2012 2:59 am

Das_BMW_E30 wrote:S50B32....You Know You Wanna....
if you've got 6k and handy with a spanner .........
User avatar
redcar
E30 Zone Squatter
E30 Zone Squatter
Posts: 1610
Joined: Wed Jul 20, 2011 11:00 pm
Location: Hertfordshire

Post Sat Jun 16, 2012 8:05 am

If I had 6k I'd rather m50 turbo than an n/a s50.

S50 is a heavy anchor :(
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Jun 16, 2012 1:16 pm

Last two tankfull's on my M50'd touring have gone through at a whisker under 37mpg...2.7 cabbie,driven by the same guy in the same way returns a little under 32mpg.

Cabbie is far more fun,on a sunny day... :D
Youth is wasted on the young.
cecotto479
Caution Unreliable Seller
Caution Unreliable Seller
Posts: 2949
Joined: Sun May 13, 2007 11:00 pm
Location: On a golf course somewhere probably

Post Sat Jun 16, 2012 1:26 pm

1981 E23 735i
1989 E30 325i Motorsport Convertible
Bavarian Retro - Classic BMW Cars, Parts and Accessories - 12.5% discount for forum members on E30 parts - use voucher code "E30zone" at checkout
Tan91
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Fri Jun 20, 2008 11:00 pm
Location: West London

Post Sat Jun 16, 2012 2:03 pm

daimlerman wrote:Last two tankfull's on my M50'd touring have gone through at a whisker under 37mpg...2.7 cabbie,driven by the same guy in the same way returns a little under 32mpg.

Cabbie is far more fun,on a sunny day... :D
See that sounds reasonable to me, not a racer type always flooring it just would consider a decent swap that would give a good return performance wise I think if i push the budget I'll be able to drop in a M50/M52.

Is there much difference between the two part from the vanos and the manifold. Correct me if I'm wrong guys. Also regarding brakes if I use 325i E30 calipars on the front that should be sufficient right? Want to try and start collecting parts after this month. winkeye
Tan91
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Fri Jun 20, 2008 11:00 pm
Location: West London

Post Sat Jun 16, 2012 2:06 pm

daimlerman so you roughly about 400 miles per tank right?
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Jun 16, 2012 2:10 pm

M50 iron block 2.5ltr
M52 alloy block 2.8ltr

OK,not quite that clear cut,but you get the idea. :D

If I were starting again,I would use the M50 iron block with M52 insides...run it on M50 management modified on a rolling road to suit the longer stroke M52 crank.

Matched with an M50 inlet manifold,I would expect about 220bhp,more than 'adequate' for an E30!
Youth is wasted on the young.
Tan91
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Fri Jun 20, 2008 11:00 pm
Location: West London

Post Sat Jun 16, 2012 8:13 pm

bhups wrote:Im near you Tanveer but my cars off the road at the moment.
Did you not sell yours through pistonheads??

or

Changed your mind? 8)
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Jun 16, 2012 9:14 pm

Tanveer wrote:daimlerman so you roughly about 400 miles per tank right?
That's pushing the tank capacity,I ran from home(Lincoln)to Calais,filled the back with cheaper wine and got to within 50 miles of home before the low fuel light came on..but that was all motorway or 'motorway standard' road.
Second trip was home into darkest Norfolk in poor weather,and a couple of 'home to work' trips.
I was pleasantly suprised at the overall fiqures for those weeks,last year the thing averaged about 32/33mpg overall,higher petrol prices tend to help generate a lighter right foot.

Running both an M20 and an M50 side by side shows up the differences between the single cam early engine and the later twin-cam with sequential injection,a light foot and the later engine does reduce costs a little,but this pales when the M20 spools up past 5000rpm in a low gear! :D
User avatar
bhups
E30 Zone Regular
E30 Zone Regular
Posts: 510
Joined: Tue Nov 06, 2007 11:00 pm

Post Sat Jun 16, 2012 9:45 pm

Tanveer wrote:
bhups wrote:Im near you Tanveer but my cars off the road at the moment.
Did you not sell yours through pistonheads??

or

Changed your mind? 8)
Nah just got stupid phone calls so decided to keep it.
Image
Tan91
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Fri Jun 20, 2008 11:00 pm
Location: West London

Post Sat Jun 16, 2012 10:50 pm

daimlerman wrote:
Tanveer wrote:daimlerman so you roughly about 400 miles per tank right?
That's pushing the tank capacity,I ran from home(Lincoln)to Calais,filled the back with cheaper wine and got to within 50 miles of home before the low fuel light came on..but that was all motorway or 'motorway standard' road.
Second trip was home into darkest Norfolk in poor weather,and a couple of 'home to work' trips.
I was pleasantly suprised at the overall fiqures for those weeks,last year the thing averaged about 32/33mpg overall,higher petrol prices tend to help generate a lighter right foot.

Running both an M20 and an M50 side by side shows up the differences between the single cam early engine and the later twin-cam with sequential injection,a light foot and the later engine does reduce costs a little,but this pales when the M20 spools up past 5000rpm in a low gear! :D
So overall-ish if your starting off with a M40, and changing the lump M50/M52 is a better bet than a M20. Just a normall query has anyone put a M54 engine in, which would be 325i or 330i from E46, some guy in America did try it pulled the lump out of a white E46 using a 330i but his thread stopped after a page or two lol.
User avatar
ajay
E30 Zone Camper
E30 Zone Camper
Posts: 1041
Joined: Fri Nov 24, 2006 11:00 pm

Post Sat Jun 16, 2012 11:16 pm

An M54 conversion would be very similar to the s54 conversion,ie fly by wire throttle k-bus etc, all possible but a bit pointless when the m52 b28 is so easily/reasonably cheaply tunable.
Tan91
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Fri Jun 20, 2008 11:00 pm
Location: West London

Post Sat Jun 16, 2012 11:50 pm

Ah fair enough nothing I was going to do just a general wondering really. Spoken to a few locals around me might have a chance to buy an M50, and get it done around July time hopefully. Shall see what time and money tells in the near future.

Amongst the engine swap I have compiled a list of things that I wish to complete by this summer, there will be many photo's and hopefully a descriptive write up, and sources of what I've used etc etc, basically a build thread LOL.

But nevertheless really appreciate the help guys and also, if you have any other info you'd like to share or ideas bring them on would love to hear them!

:cool:
Tan91
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Fri Jun 20, 2008 11:00 pm
Location: West London

Post Mon Jun 25, 2012 6:07 pm

bhups wrote:
Tanveer wrote:
bhups wrote:Im near you Tanveer but my cars off the road at the moment.
Did you not sell yours through pistonheads??

or

Changed your mind? 8)
Nah just got stupid phone calls so decided to keep it.
Yours is M52B28 if I remember correctly with a few tweeks, its a good sleeper.
What's your plans now?
And hows the Fuel Consumption on it?
Ajsingh
E30 Zone Addict
E30 Zone Addict
Posts: 2378
Joined: Sun Mar 28, 2010 11:00 pm
Location: West Laaaandaan init! / Milton Keynes

Post Mon Jun 25, 2012 9:54 pm

M20!!!! Then stroke it to a 2.7 or a 2.8!
E30 Crazy!
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Mon Jun 25, 2012 10:05 pm

Ajsingh wrote:M20!!!! Then stroke it to a 2.7 or a 2.8!
Then get bored and buy an M52 :)

Bush fillers GB is still on BTW winkeye
Tan91
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Fri Jun 20, 2008 11:00 pm
Location: West London

Post Tue Jun 26, 2012 12:41 am

Ajsingh wrote:M20!!!! Then stroke it to a 2.7 or a 2.8!
Na I'm afraid not Singh. As original as that block will be to the E30 can't afford to spend time on taking care of one, M50 seems like less maintenance more power and torque, and better MPG. And restoring a M20, well that's another book itself lol. Anyways to me M20 will always sound nicer!

winkeye