Mcgard Wheel locking -Issue

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

SHAKEELE30
Boost Junkie
Posts: 3281
Joined: Mon Apr 04, 2005 11:00 pm
Location: CROYDON

Post Fri Jun 08, 2012 8:24 am

Ive got some mcgard wheel locks on my car, but yesterday i managed to mess up the locking key, so now cant take the bolts off, those you that know, these have diferent patterns on them so cant just go and buy another.
Also cant just cut them off as they sit a little way in the alloys.

So what to do, anyone know any other ways of getting these off, or any other ideas.

the company itself is based in USA, cant find a email add to email them, all i can find is a international number.... :roll:
Mo13
E30 Zone Regular
E30 Zone Regular
Posts: 722
Joined: Tue Apr 03, 2012 11:00 pm
Location: East London

Post Fri Jun 08, 2012 8:44 am

How bad is the key? Have you tried to straighten up the key and try to take it off? you may need get someone to to keep some pressure on it as you turn so it doesn't slip.....haven't tried this before but this is the way I would have gone about it at first.
SHAKEELE30
Boost Junkie
Posts: 3281
Joined: Mon Apr 04, 2005 11:00 pm
Location: CROYDON

Post Fri Jun 08, 2012 8:59 am

the key is pretty much out of shape...
User avatar
harry_p
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5313
Joined: Thu Oct 12, 2006 11:00 pm
Location: norfolk

Post Fri Jun 08, 2012 9:32 am

either weld a bolt to the top of it and undo with a socket and bar, or find an old socket slightly too small to fit over and smack it on with a lump hammer.

i've lost the keys to a couple of sets of these over the years :mad:

if you can find the original packaging there should be an address and a key code to send away for a replacement key. i've never bothered though as i expect it would take ages.
cheers,

harry
Jos
E30 Zone Camper
E30 Zone Camper
Posts: 1104
Joined: Mon Jan 17, 2005 11:00 pm
Location: Belfast

Post Fri Jun 08, 2012 10:07 am

Old socket over the top, mig weld the outer slip ring on the bolt to the inner, undo and throw away. Bloody rubbish as they are too shallow and always break!
'89 Touring - slightly rippled with a rusty underside
'94 e36 tree climber
anothere21323i
E30 Zone Camper
E30 Zone Camper
Posts: 1203
Joined: Mon Oct 31, 2005 11:00 pm
Location: Colchester

Post Fri Jun 08, 2012 10:48 am

I had exactly the same problem with mine recently - do you still have the packet they came in? There is an individual code in there for your specific bolt. I contacted them (they're in Germany) and bought a replacement for mine with the code number on my packet label which arrived a few days later and was a perfect fit. Next stop BMW Main Dealer - a genuine set of locking nuts is only about £20 I think, and a much better design.
SHAKEELE30
Boost Junkie
Posts: 3281
Joined: Mon Apr 04, 2005 11:00 pm
Location: CROYDON

Post Fri Jun 08, 2012 11:11 am

yeah i have a code, but i have 2 sets on them, so not sure whether or not the code is for the one i need...
appletree
E30 Zone Addict
E30 Zone Addict
Posts: 3479
Joined: Fri Jan 20, 2006 11:00 pm
Location: Retford

Post Fri Jun 08, 2012 11:25 am

These are pretty good, like a socket but with a left handed spirel inside so the grip in to the stud/nut as long as you can get them over it in the hole in the alloy.

http://www.ebay.co.uk/itm/Irwin-Bolt-Nu ... 1e6eadcd2b
Image

You should never underestimate the predictability of stupidity

M42 Supercharged 285bhp + M3 6speed box
Jos
E30 Zone Camper
E30 Zone Camper
Posts: 1104
Joined: Mon Jan 17, 2005 11:00 pm
Location: Belfast

Post Fri Jun 08, 2012 11:39 am

appletree wrote:These are pretty good, like a socket but with a left handed spirel inside so the grip in to the stud/nut as long as you can get them over it in the hole in the alloy.

http://www.ebay.co.uk/itm/Irwin-Bolt-Nu ... 1e6eadcd2b
don't work, the outer section spins independently of the bolt, hence the welder requirement
'89 Touring - slightly rippled with a rusty underside
'94 e36 tree climber
BATTS91
E30 Zone Squatter
E30 Zone Squatter
Posts: 1764
Joined: Sat May 01, 2010 11:00 pm
Location: clacton on sea essex

Post Fri Jun 08, 2012 2:18 pm

may i suggest going to a locksmith ? perhaps driving the car there with you ??
SHAKEELE30
Boost Junkie
Posts: 3281
Joined: Mon Apr 04, 2005 11:00 pm
Location: CROYDON

Post Fri Jun 08, 2012 3:18 pm

lol the car is sorn :D
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Fri Jun 08, 2012 3:54 pm

Get an old wheel nut, put it against the face of the mc guard, crank the big up and weld through the hole onto the mc guard. Then just undo as normal.
Have done a couple using that method, last set i managed to do without damaging the wheel.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
mcbonio
E30 Zone Squatter
E30 Zone Squatter
Posts: 1868
Joined: Sun Feb 12, 2012 11:00 pm

Post Fri Jun 08, 2012 4:20 pm

Use a cold chisel and hammer anti clockwise and chisel it out, one sturdy well placed whack will to begin to back the nut out.

Or you can get a 17-18mm socket and a hammer and bash it over the wheel nut and then undo it that way.

Very easy to do, locking wheel nuts are a joke. How do you think thieves steal your wheels? They just happen to have a cast collection of wheel nut keys? .... :evil:
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Fri Jun 08, 2012 9:53 pm

cold chisel is no good on mc guards, the outer collar just spins and the center is brittle enough that lumps come off instead of the nut tuning if it has been tightened correctly.

on the star shaped nuts a lot of thieves use the multi fit "needle" sockets, on ones without outer collars they use either the sockets shown above or a chisel but damage the wheel doing so (they dont care they are free) and rarely as the cold chisel makes a LOT of noise.
For anything with oem type lockers they will just go to a scrapyard and get a key out of the tool kit/glovebox of a scraper or take the vin and do it.
Wheels are rarely impulse thefts, they need to know they are there and be able to leave swiftly with 4 wheels.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
Jos
E30 Zone Camper
E30 Zone Camper
Posts: 1104
Joined: Mon Jan 17, 2005 11:00 pm
Location: Belfast

Post Fri Jun 08, 2012 10:55 pm

HairyScreech wrote:Get an old wheel nut, put it against the face of the mc guard, crank the big up and weld through the hole onto the mc guard. Then just undo as normal.
Have done a couple using that method, last set i managed to do without damaging the wheel.
that's better than the weld the middle up thru a socket method.. /brain filed
'89 Touring - slightly rippled with a rusty underside
'94 e36 tree climber
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Fri Jun 08, 2012 11:17 pm

^^ that should be MIG not big, that will be my auto correct.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
Barx325i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6493
Joined: Wed Jul 26, 2006 11:00 pm

Post Fri Jun 08, 2012 11:47 pm

I spotted some nice RA's in a scrap yard with days to go before they were crushed. The guy handed me a giant ice cream box full of keys as they were mcguarded on - after 2 mins of searching through the hundreds of keys I found a match. If you can't get them off, visit your local scrap man. Worth a shot..
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Sat Jun 09, 2012 2:28 am

And if the above fails get one of the 3 pin style keysnand drill the 3 pin holes in the nut for it to fit. There's lots of ways to skin this cat.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
Tom_Maverick
E30 Zone Camper
E30 Zone Camper
Posts: 1343
Joined: Wed Aug 25, 2010 11:00 pm
Location: Brighton

Post Sat Jun 09, 2012 7:03 am

Gator grips get them off in minutes, no welding required... I shall go find you a link,
Image
Tom_Maverick
E30 Zone Camper
E30 Zone Camper
Posts: 1343
Joined: Wed Aug 25, 2010 11:00 pm
Location: Brighton

Post Sat Jun 09, 2012 7:05 am

Image
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Sat Jun 09, 2012 9:06 am

hit the the centre with a large punch a few times to stop the outer case spinning, then a Drill bit down the middle :D
magpie
Old Skooler
Old Skooler
Posts: 28035
Joined: Sun Jun 29, 2008 11:00 pm
Location: Consett,Durham.

Post Sat Jun 09, 2012 10:47 am

there are a few fails at this 8O

Image

Image

Image

best of luck .
Image
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds :)
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Sat Jun 09, 2012 12:00 pm

Tom_Maverick wrote:http://bit.ly/MqZncz


Pow!
That's what i was thinking of in the first post.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&