what are my ratio's ???

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

gnrsoul
E30 Zone Regular
E30 Zone Regular
Posts: 612
Joined: Mon Oct 05, 2009 11:00 pm
Location: Kincardine Scotland

Post Thu Jun 07, 2012 4:53 pm

ok called bmw with my vin number to find out what diff i have as the tag is gone and this is what they told me

its I=47:11=4,27

anyone know what that is?

i have a 1993 - 318i cabby m40

thanks
Duke137
Married to the E30 Zone
Married to the E30 Zone
Posts: 7207
Joined: Sat Aug 29, 2009 11:00 pm

Post Thu Jun 07, 2012 4:56 pm

4.27:1 I would say, unless it has been changed. You can also check the wiki

http://www.e30zone.net/e30zonewiki/inde ... fferential

Scroll down to the table at the bottom

Looks to be correct.
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
gnrsoul
E30 Zone Regular
E30 Zone Regular
Posts: 612
Joined: Mon Oct 05, 2009 11:00 pm
Location: Kincardine Scotland

Post Thu Jun 07, 2012 5:33 pm

:D thanks for that duke, it looks to be the one

need a replacement as myone is noices and whines and it p1ssing me off :chuckle:
User avatar
redcar
E30 Zone Squatter
E30 Zone Squatter
Posts: 1610
Joined: Wed Jul 20, 2011 11:00 pm
Location: Hertfordshire

Post Thu Jun 07, 2012 7:41 pm

Hi mate, 4.27 is what my m40 316i had, which I imagine is the same as what you would have on yours if it's also a manual. :D

Are you looking to buy a diff?
gnrsoul
E30 Zone Regular
E30 Zone Regular
Posts: 612
Joined: Mon Oct 05, 2009 11:00 pm
Location: Kincardine Scotland

Post Thu Jun 07, 2012 11:52 pm

yes looking around fora good priced one that does not have any noices or whines
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Jun 08, 2012 12:00 am

47 and 11 are the number of teeth on the crown wheel and pinion gears respectively.
User avatar
rich318i
E30 Zone Addict
E30 Zone Addict
Posts: 2393
Joined: Wed Oct 26, 2005 11:00 pm
Location: Brands :) :)

Post Fri Jun 08, 2012 12:00 am

there is a way to find out 100% what ur diff is a 4.27. turn the wheel 10 times and count the mount of times the input will turn 42.70 times, 100 turns of the wheel and the input will turn 427 times.
G-Bear
E30 Zone Squatter
E30 Zone Squatter
Posts: 1631
Joined: Wed Mar 12, 2008 11:00 pm
Location: Hertfordshire

Post Fri Jun 08, 2012 9:06 am

From reading through the above, I did a quick search to see if they can be serviced as mine is noisy and wines away. In doing so, came across this for sale on one of Magpies frags, if that's any help. It's 4.27...
G-Bear
E30 Zone Squatter
E30 Zone Squatter
Posts: 1631
Joined: Wed Mar 12, 2008 11:00 pm
Location: Hertfordshire

Post Fri Jun 08, 2012 9:06 am

e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Fri Jun 08, 2012 1:22 pm

there is a way to find out 100% what ur diff is a 4.27. turn the wheel 10 times and count the mount of times the input will turn 42.70 times, 100 turns of the wheel and the input will turn 427 times.
surely turning the output shafts once and counting the input turns would be easier.....
4.27 turns of the input will result in 1 turn of the out puts :wink:
A 2 door e30 with 8 cylinders, what could be better winkeye :D
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Jun 08, 2012 1:55 pm

rich318i wrote:there is a way to find out 100% what ur diff is a 4.27. turn the wheel 10 times and count the mount of times the input will turn 42.70 times, 100 turns of the wheel and the input will turn 427 times.
This won't work with an open diff, since both rear wheels are unlikely to turn together at exactly the same rate. You would normally do this test with one wheel still firmly on the ground, so as to remove it from the equation, and this would result in the input shaft turning 854 (2 x 427) turns for 100 turns of the wheel.