door seal?
Moderator: martauto
-
mucka88
- E30 Zone Newbie

- Posts: 129
- Joined: Wed Feb 22, 2012 11:00 pm
Noticed today after fixng other water leaks(floorbungs), Ive started getting water coming through the passenger side below the door, just above the plastic trim what hold carpet in place...
anyone else had this problem, thinking the door seals?
anyone else had this problem, thinking the door seals?
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
the door seals do shrink over the years,do they fit flush all the way around ? ie if you push the bottom corners in, does it come away from top corners ? etc, put a wanted up for some nice ones
-
mucka88
- E30 Zone Newbie

- Posts: 129
- Joined: Wed Feb 22, 2012 11:00 pm
Waiting for the terrible weather to stop and ill check that, thanks
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
check for splits in the rubber also.
is it a 2dr...4dr...touring or cab ?
is it a 2dr...4dr...touring or cab ?

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
BATTS91
- E30 Zone Squatter

- Posts: 1764
- Joined: Sat May 01, 2010 11:00 pm
- Location: clacton on sea essex
do bmw sell new door seals ? mine have shrunk but not noticed leakages yet??
-
rich318i
- E30 Zone Addict

- Posts: 2393
- Joined: Wed Oct 26, 2005 11:00 pm
- Location: Brands :) :)
yep they do, might have to wait a few months new door seals on a e28 took 18months till they get orders in to make them again. ask a man at the main dealers he said they do every part ever made still for any series.
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
at what cost though
i bet a new door seal isn't cheap .
i bet a new door seal isn't cheap .

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
rich318i
- E30 Zone Addict

- Posts: 2393
- Joined: Wed Oct 26, 2005 11:00 pm
- Location: Brands :) :)
think they were about 500
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
Yeah this has been asked before (ages ago mind) and the price was eye-watering then 
-
rich318i
- E30 Zone Addict

- Posts: 2393
- Joined: Wed Oct 26, 2005 11:00 pm
- Location: Brands :) :)
but go main dealers and ask they might have made a batch up
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Stick in a 2" section from a door seal off of a scrapper, next to the existing join along the bottom.
-
mucka88
- E30 Zone Newbie

- Posts: 129
- Joined: Wed Feb 22, 2012 11:00 pm
4door and seal seems ok, looked closer and seems running from bonnet area down side of door and under plastic door strip
-
BATTS91
- E30 Zone Squatter

- Posts: 1764
- Joined: Sat May 01, 2010 11:00 pm
- Location: clacton on sea essex
another good idea brian , cheers
im on that one
-
suchy
- True Zone Relic
- Posts: 6604
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Portsmouth
Good idea that!!Brianmoooore wrote:Stick in a 2" section from a door seal off of a scrapper, next to the existing join along the bottom.
