Engine change tomorrow!!
Moderator: martauto
-
george101
- E30 Zone Newbie

- Posts: 113
- Joined: Fri Apr 20, 2012 11:00 pm
Starting my engine change tomorrow, putting a 325i from a chromie into a 316 facelift. Wish me luck guys any tips?
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Yeah, see if you can get the parts to convert it to a more modern engine management system.
As for the rest; usual stuff. Jack the rear end as high as you can go, put thick towels/fire blankets around the engine bay so you don't scratch the paintwork, and always have a mate hanging around to watch your back/make the tea/ stand on the crane.
Also if you can, change the sump gasket before the 325i goes in; it'll NEED doing, and it's a pain in the arse doing it with it already sitting on the subframe.
Exciting, innit
As for the rest; usual stuff. Jack the rear end as high as you can go, put thick towels/fire blankets around the engine bay so you don't scratch the paintwork, and always have a mate hanging around to watch your back/make the tea/ stand on the crane.
Also if you can, change the sump gasket before the 325i goes in; it'll NEED doing, and it's a pain in the arse doing it with it already sitting on the subframe.
Exciting, innit
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
george101
- E30 Zone Newbie

- Posts: 113
- Joined: Fri Apr 20, 2012 11:00 pm
Cheers buddy, tea is all I need, will let everyone know how it goes.
-
Alex
- Married to the E30 Zone

- Posts: 22665
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
Read brianmoors wiring warning for engine swops in "engine swop" section
-
Mo13
- E30 Zone Regular

- Posts: 722
- Joined: Tue Apr 03, 2012 11:00 pm
- Location: East London
Good LUCK! it'll be nice to see few pics and documentation of the swap. 
