Which Clutch Parts Manufacturer is best

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
Gavla
E30 Zone Squatter
E30 Zone Squatter
Posts: 1586
Joined: Tue Dec 06, 2011 11:00 pm

Post Sat Jun 02, 2012 1:43 am

I need to purchase new clutch parts, what make of cylinders, discs and pressure plates are best?

Pagid / Sachs / Bilstein or Bosch

Let me know your opinions and experiences

Thanks :D
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Sat Jun 02, 2012 6:36 am

Sachs stuff for the mechanism is OEM IIRC.

Not sure who makes the cylinders for BMW
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sat Jun 02, 2012 8:22 am

Sachs and LUK are the ones used over here
User avatar
Gavla
E30 Zone Squatter
E30 Zone Squatter
Posts: 1586
Joined: Tue Dec 06, 2011 11:00 pm

Post Sat Jun 02, 2012 4:29 pm

Thanks for the input gents I guess sachs it is.
jonny323i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5428
Joined: Mon Mar 14, 2005 11:00 pm
Location: Stoke on trent

Post Sun Jun 03, 2012 6:39 am

Iv been offered a Sachs and a drivetec(q&h) the sachs for m20 is £147 the other £69 has anyone used the drivetec type
Touring for life
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sun Jun 03, 2012 10:22 am

You will get a Sachs cheaper than that from Matt/ECP on here
The Q&H might be worth the risk if you spend all your driving time tickling the throttle but I wouldnt fit anything less than a Sachs, I ran an LUK on the back of my M52B30 and it died quickly, slipped like hell after only a few hundred miles and a couple of laps of Oulton Park, Sachs lasted 3 track days before it started slipping
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sun Jun 03, 2012 10:35 am

DanThe wrote: I ran an LUK on the back of my M52B30 and it died quickly, slipped like hell after only a few hundred miles and a couple of laps of Oulton Park, Sachs lasted 3 track days before it started slipping
I wish you hadn't said that. I just ordered one for my M20B25 :( Bargain at 85 quid though.
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Sun Jun 03, 2012 1:19 pm

They're all pretty good - LuK, Borg and Beck, Unipart etc.
User avatar
PeteE30Tourer
E30 Zone Camper
E30 Zone Camper
Posts: 1317
Joined: Tue Dec 21, 2004 11:00 pm
Location: Dorset

Post Sun Jun 03, 2012 9:33 pm

I'm beginning to think this is the next job for me. How easy is it to replace the clutch?
Image
Back behind an M20, but now I can hear it better.
User avatar
Gavla
E30 Zone Squatter
E30 Zone Squatter
Posts: 1586
Joined: Tue Dec 06, 2011 11:00 pm

Post Sun Jun 03, 2012 10:53 pm

Apparently the cylinders are a fairly easy job, however the clutch is not for the faint hearted?
User avatar
rich318i
E30 Zone Addict
E30 Zone Addict
Posts: 2393
Joined: Wed Oct 26, 2005 11:00 pm
Location: Brands :) :)

Post Sun Jun 03, 2012 11:27 pm

DanThe wrote:You will get a Sachs cheaper than that from Matt/ECP on here
The Q&H might be worth the risk if you spend all your driving time tickling the throttle but I wouldnt fit anything less than a Sachs, I ran an LUK on the back of my M52B30 and it died quickly, slipped like hell after only a few hundred miles and a couple of laps of Oulton Park, Sachs lasted 3 track days before it started slipping
was that with the duel mass or soild fly ?
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sun Jun 03, 2012 11:43 pm

M20 gear
User avatar
Ronits
E30 Zone Newbie
E30 Zone Newbie
Posts: 44
Joined: Mon Oct 24, 2011 11:00 pm
Location: Rugby , Warwickshire

Post Sun Jun 03, 2012 11:44 pm

im buying clutches from Germany , they are cheaper over there and quality very good :)
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Mon Jun 04, 2012 6:21 am

PeteE30Tourer wrote:I'm beginning to think this is the next job for me. How easy is it to replace the clutch?
I've got the engine and box and the floor of my garage to do it. Based on the location of all the bolts on the gearbox, fook doing that in situ 8O
User avatar
Billwill
E30 Zone Regular
E30 Zone Regular
Posts: 363
Joined: Sun Jun 26, 2011 11:00 pm
Location: South Africa

Post Mon Jun 04, 2012 9:10 am

Gavla wrote:Apparently the cylinders are a fairly easy job, however the clutch is not for the faint hearted?
I replaced my clutch master and slave cylinders a few weeks ago...slave cylinder is easy but the master cylinder can be difficult to access...I have small hands but it really can be awkward on the RHD models with the brake linkeage and air-con hoses getting in the way.

I have done the clutch replacement a few times...not too difficult if you support the weight of the gearbox with a trolley jack. I was much younger though in those days.....I dont know if I could replace the clutch by myself now! :(

And here the Sachs clutch is supposed to be the best although my present LUK clutch has been in for about 7 years now with no problem but this is with pretty sedate driving.
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Jun 04, 2012 9:51 am

Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Mon Jun 04, 2012 9:55 am

nothing wrong with LUK in its intended car! Sachs seem better for 24v use.
BATTS91
E30 Zone Squatter
E30 Zone Squatter
Posts: 1764
Joined: Sat May 01, 2010 11:00 pm
Location: clacton on sea essex

Post Mon Jun 04, 2012 3:13 pm

totally diffrent cars but i put cheap transmech clutches in my escort 1.8 gti and my mk5 fiesta that had a 1.7 puma engne and i launched them hard and ragged em day in day out , e30 id go Luk
User avatar
irish320i
E30 Zone Regular
E30 Zone Regular
Posts: 431
Joined: Wed Jun 29, 2005 11:00 pm
Location: Co. Monaghan, Ireland

Post Mon Jun 04, 2012 11:36 pm

we sell all of the above and we see most warranty returns on the luk stuff followed by transmech but the transmech only fails on bigger cars never had any back on lighter cars
Al
89 316i s50b30, 00 subaru imperza turbo(gone) 2005 range rover td6,
BATTS91
E30 Zone Squatter
E30 Zone Squatter
Posts: 1764
Joined: Sat May 01, 2010 11:00 pm
Location: clacton on sea essex

Post Tue Jun 05, 2012 2:56 am

get what ya pay for with big boy engines with clutches it seems , didnt read the couple of bad comments on Luk previous experiance sees them pretty good but hey ho
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue Jun 05, 2012 7:14 pm

irish320i wrote:we sell all of the above and we see most warranty returns on the luk stuff followed by transmech but the transmech only fails on bigger cars never had any back on lighter cars
Exactly the same was said by a mate of mine that works at GSF.
LUK seem to be worse at making dual mass clutches than sprung clutches like the M20.
As Si pointed out the LUK M20 stuff lasts ok on standard engines
User avatar
Gavla
E30 Zone Squatter
E30 Zone Squatter
Posts: 1586
Joined: Tue Dec 06, 2011 11:00 pm

Post Fri Jun 08, 2012 9:47 am

The good news is that I only needed to replace the slave cylinder. Bad news is that my mechanic had to spend more than usual on it as the problem was a a bolt had snapped off (or so he said). So it still cost me £415!

He did say that he recons it was the original slave cylinder so hopefully the new Sachs one lasts another 26 years.

In search of the best price I did come across 3 parts websites that I thought were worth a mention as they all had very different prices but were very competitive. mrauto.co.uk / 123carparts.co.uk / carparts4less.co.uk (thanks Brian)
User avatar
harry_p
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5313
Joined: Thu Oct 12, 2006 11:00 pm
Location: norfolk

Post Fri Jun 08, 2012 9:51 am

£400 to do a slave :eek:

did he take the engine and gearbox out to do it? :mad:
cheers,

harry
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Jun 08, 2012 12:55 pm

Wow, must be a londoner
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Fri Jun 08, 2012 1:04 pm

i very much doubt it would have been the original slave.! and 400 sheets to replace the entire clutch is way OTT but 400 quid to do a slave..... hes not only a lier, but a con artist and he ripped you off big time 8O
I wouldnt fit anything less than a Sachs, I ran an LUK on the back of my M52B30 and it died quickly, slipped like hell after only a few hundred miles and a couple of laps of Oulton Park, Sachs lasted 3 track days before it started slipping
this.!! i fitted a brand new luk to the back of my m52b28, it is complete shite and has been that way pretty much from brand new.!
as simon says, i would fit one to the back of its intended engine provided the driver doesnt have a foot made of lead. cope fine with an m20 but on anything bigger it has to be sachs for sure.
luk could not stand up to my m52 with my right foot so its all coming out to be replaced with sachs very soon 8)
A 2 door e30 with 8 cylinders, what could be better winkeye :D
User avatar
Gavla
E30 Zone Squatter
E30 Zone Squatter
Posts: 1586
Joined: Tue Dec 06, 2011 11:00 pm

Post Fri Jun 08, 2012 2:01 pm

Yip, that's London for you.

I would love to have a garage and a lift and then I would tinker myself. He may have ripped me off but the catch 22 is that he is 2 blocks from where I live so its the whole convenience factor. Anyway, I have had the break discs and pads, shocks, water pump and now the slave cylinder done. Hopefully that will be it for the next 6 months at least.

Why could it not have been the original slave?
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Fri Jun 08, 2012 2:29 pm

slave can be done with a jack, axle stand, 8mm spanner, 3/8 ratchet and a 13mm socket. just something to bare in mind in the future mate.
Why could it not have been the original slave?
because how many time do you think the clutch has been used in the last 23 odd years?.... not something that i would see last that long to be fair. and the amount he charged you suggests thats just the type of thing one of these rip off merchants would say to someone to make the job sound like it was more difficult than actually was.. my slave took me 15 mins from the time i stuck the jack under the car
A 2 door e30 with 8 cylinders, what could be better winkeye :D
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Fri Jun 08, 2012 2:30 pm

btw, im not having a go mate. just trying to make you aware
A 2 door e30 with 8 cylinders, what could be better winkeye :D
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Jun 08, 2012 6:31 pm

I can think of absolutely no reason not to expect the slave cylinder to be the original one, OTHER than lack of maintenance!
On RH drive E30s the clutch fluid is contained in a separate reservoir from the brake fluid, and this is its downfall. Brake fluid should be changed every two years, and whereas the fluid in the brake system may get changed occasionally, once these cars have left a regular dealer or specialist servicing schedule, I find it's not at all unusual to find fluid in the clutch reservoir similar in appearance and viscosity to cold used engine oil, having not been replaced for maybe fifteen years or so.
The braking hydraulic system on E30s uses similar components, much more of them, and is used far more often, but it's rare for any of it to fail.
User avatar
Gavla
E30 Zone Squatter
E30 Zone Squatter
Posts: 1586
Joined: Tue Dec 06, 2011 11:00 pm

Post Fri Jun 08, 2012 6:42 pm

[quote="e30-dk"]slave can be done with a jack, axle stand, 8mm spanner, 3/8 ratchet and a 13mm socket. just something to bare in mind in the future mate.

Well now I feel like a mug, but hey you live and learn. Thanks for the info.
User avatar
Gavla
E30 Zone Squatter
E30 Zone Squatter
Posts: 1586
Joined: Tue Dec 06, 2011 11:00 pm

Post Fri Jun 08, 2012 6:45 pm

Brianmoooore wrote:I can think of absolutely no reason not to expect the slave cylinder to be the original one, OTHER than lack of maintenance!
On RH drive E30s the clutch fluid is contained in a separate reservoir from the brake fluid, and this is its downfall.
Quite right, that is what he said, clutch fluid was like tar. He may have taken the mick a bit but I do have faith that he knows his cars. I will question him more about the time he takes do work next time I have to get the car to him. (hopefully not soon!)
Idol
E30 Zone Regular
E30 Zone Regular
Posts: 331
Joined: Mon Jul 31, 2006 11:00 pm
Location: Essex

Post Sat Jun 09, 2012 3:11 pm

Which is actually Euro Car Parts as they have the same VAT number :wink:
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Jun 09, 2012 6:31 pm

Also have the same part numbers. ECP without the silly fake sales.
User avatar
Gavla
E30 Zone Squatter
E30 Zone Squatter
Posts: 1586
Joined: Tue Dec 06, 2011 11:00 pm

Post Sat Jun 09, 2012 9:27 pm

I figured there was some sort of affiliation, cheeky that the prices vary so much. ECP quoted me +-£92 for a slave and master cylinder, same parts on carparts4less were +-£66!