mtech2 kit fitting
Moderator: martauto
-
matt86
- E30 Zone Addict

- Posts: 2468
- Joined: Thu Jan 19, 2012 11:00 pm
- Location: "The Cotswolds" Stroud, Gloucestershire
Hi I've just had a mtech2 kit sparyed and would like to fit it tonight, I wanted to ask if I can fit the side pods and bumpers before the side skirts, also the side pods only have a couple 1 or 2 clips on where I believe they go into the holes where the trim sits half way up the door normally (without mtech2 kit fitted is this correct, do I tiger bond the rest of it to keep it in place?
Also if I put the bumpers on first will I need to take at least one back off to fit the side skirts?
Also how are the side skirts secured? do I need to buy clips from bmw?
Thanks
Matt
Also if I put the bumpers on first will I need to take at least one back off to fit the side skirts?
Also how are the side skirts secured? do I need to buy clips from bmw?
Thanks
Matt
-
matt86
- E30 Zone Addict

- Posts: 2468
- Joined: Thu Jan 19, 2012 11:00 pm
- Location: "The Cotswolds" Stroud, Gloucestershire
just found this, although still no info on side pods and side skirts http://www.e30zone.net/e30zonewiki/inde ... ar_bumpers
It says in this article the 2door side pods are different to the convertible, is this true?
If so how are they different and can they be modified to fit? Or am I best of getting the side skirts/side pods from a convertible and selling my 2 door ones?
Its a bit of a bitch if they don't fit as just spent 300 to spray the full kit in mauritius metallic blue, still my fault, should have done more research first, it was mainly the bumpers I wanted anyway, but would be nice to fit the skirts and pods though.
Thanks in advance.
It says in this article the 2door side pods are different to the convertible, is this true?
If so how are they different and can they be modified to fit? Or am I best of getting the side skirts/side pods from a convertible and selling my 2 door ones?
Its a bit of a bitch if they don't fit as just spent 300 to spray the full kit in mauritius metallic blue, still my fault, should have done more research first, it was mainly the bumpers I wanted anyway, but would be nice to fit the skirts and pods though.
Thanks in advance.
-
Captain_Birdseye
- E30 Zone Regular

- Posts: 874
- Joined: Sun Mar 25, 2012 11:00 pm
- Location: Bristol (and Cheltenham)
oh, hope it fits ok mate.
-
matt86
- E30 Zone Addict

- Posts: 2468
- Joined: Thu Jan 19, 2012 11:00 pm
- Location: "The Cotswolds" Stroud, Gloucestershire
If anyone is near by and could fit this I would be willing to pay them, or alternatively I can drive to you (within reason depending on how far away you are), alternatively, I could take it to a bodyshop and see what they can do.
-
Tom_Maverick
- E30 Zone Camper

- Posts: 1343
- Joined: Wed Aug 25, 2010 11:00 pm
- Location: Brighton
I thought 2 door and vert ones were the same? correct me if I'm wrong... have you tried holding the kit up to the car and seeing how it'll fit?

-
matt86
- E30 Zone Addict

- Posts: 2468
- Joined: Thu Jan 19, 2012 11:00 pm
- Location: "The Cotswolds" Stroud, Gloucestershire
No mate, that was on my mind, will try that first, I would have thought they were too, apparently a bit of the bottom of the sideskirts need to be trimmed though, as sills are slightly different on 2 door and convertible.
Don't really know what clips I need etc though, I know how bumpers go on, and I think I know hopw the side pods go on but not 100%
Don't really know what clips I need etc though, I know how bumpers go on, and I think I know hopw the side pods go on but not 100%
-
Tom_Maverick
- E30 Zone Camper

- Posts: 1343
- Joined: Wed Aug 25, 2010 11:00 pm
- Location: Brighton
http://www.scchosting.com/e30/M-Technik%20II.pdf
the original installation manual!
personally I'd get a drill, centrepunch, kurust, zinc primer (for the holes) and some self tappers and washers!
the original installation manual!
personally I'd get a drill, centrepunch, kurust, zinc primer (for the holes) and some self tappers and washers!

-
matt86
- E30 Zone Addict

- Posts: 2468
- Joined: Thu Jan 19, 2012 11:00 pm
- Location: "The Cotswolds" Stroud, Gloucestershire
Cheers mate your a ledgend, was thinking of just doing that the main thing is to rustproof the siles and get the sideskirts on straight and flush I think, still may take it to a bodyshop, just for the sideskirts.
-
Tom_Maverick
- E30 Zone Camper

- Posts: 1343
- Joined: Wed Aug 25, 2010 11:00 pm
- Location: Brighton
I wouldn't bother.. all you need to do is go to the local dealers and get the clips that hold the skirts to the underside lip of the sills.. they'll probably even explain how they work! apart from that it's a piece of p*ss!

-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
well worth buying templates & clips from bmw, ok, they're going to add to your expendature, but if you want it to look good, it's the only guarantee you have of doing a decent job, check, double check and check again..
get some new HSS bits, cheap bits need not apply.
the front splitter needs holes drilling into the valnce to locate the top hangers, also the unique extended lower lip brackets, all are essential.
the pods need you to drill into the arches and wings - templates are again almost essential. They also require unique hanging brackets & self tappers
skirts need special clips for the lower sill seam and again unique hanger brackets that push into the top edge of the sill into gromets which you need, and need to drill.
Seriously, don't try and do it on the cheap, it's not a 5 minute fit & forget.
get some new HSS bits, cheap bits need not apply.
the front splitter needs holes drilling into the valnce to locate the top hangers, also the unique extended lower lip brackets, all are essential.
the pods need you to drill into the arches and wings - templates are again almost essential. They also require unique hanging brackets & self tappers
skirts need special clips for the lower sill seam and again unique hanger brackets that push into the top edge of the sill into gromets which you need, and need to drill.
Seriously, don't try and do it on the cheap, it's not a 5 minute fit & forget.
-
matt86
- E30 Zone Addict

- Posts: 2468
- Joined: Thu Jan 19, 2012 11:00 pm
- Location: "The Cotswolds" Stroud, Gloucestershire
who can I get to do it for me, as I don't think I would be up to the task?
thanks
thanks
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
trouble is it'll be expensive that way.. Shaz325sport (iirc) will do it but he's quite far from you.
as Tom says it's not difficult, just don't cut corners & rush it, you can sell the templates on afterwards.
as Tom says it's not difficult, just don't cut corners & rush it, you can sell the templates on afterwards.
-
Tom_Maverick
- E30 Zone Camper

- Posts: 1343
- Joined: Wed Aug 25, 2010 11:00 pm
- Location: Brighton
Do it yourself! It's a learning curve, not hard and you get the satisfaction of saying ' I did that!! ' plus were all here for advice and abuse 

-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Hardtop skirts will not fit without MAJOR beasting. Convertible side skirts are very thin on the ground and most councilled up cabs with retrofitted kits have chopped skirts.
Hopefully you have most of the fixings as they are lots of money new.
Don't waste money on lower sill fixings as they won't be of much use.
If you need to ask the questions you are asking you are best leaving the fitting to somebody who has previous experience or else you will end up with a car that looks like swiss cheese and a scrap bodykit
Hopefully you have most of the fixings as they are lots of money new.
Don't waste money on lower sill fixings as they won't be of much use.
If you need to ask the questions you are asking you are best leaving the fitting to somebody who has previous experience or else you will end up with a car that looks like swiss cheese and a scrap bodykit
-
kman82
- E30 Zone Regular

- Posts: 967
- Joined: Mon Sep 22, 2008 11:00 pm
- Location: Oxford
yeah take it back to the place who sprayed them for you and ask them to fit mate, its pretty involved. Failing that any other good body shop.
My cab has got coupe skirts on it and they needed to be cut and trimmed to fit. Its all hidden from view though so not as bad as it sounds.
from memory all the clips necessary from bmw was about £80. pop in and they'll tell you exactly what you need. Or contact cotwolds through the genuine parts bit of this site, i'm sure they've sold the complete kit 100's of times
My cab has got coupe skirts on it and they needed to be cut and trimmed to fit. Its all hidden from view though so not as bad as it sounds.
from memory all the clips necessary from bmw was about £80. pop in and they'll tell you exactly what you need. Or contact cotwolds through the genuine parts bit of this site, i'm sure they've sold the complete kit 100's of times
-
rich318i
- E30 Zone Addict

- Posts: 2393
- Joined: Wed Oct 26, 2005 11:00 pm
- Location: Brands :) :)
wurth do the clip aswell
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
I think Matt has been through the sill issue via a different thread, whether DIY or a 'pro' install it's either a step by step job paying careful attn to detail, or £££'s
-
adit
- Married to the E30 Zone

- Posts: 13727
- Joined: Wed Jun 20, 2007 11:00 pm
- Location: portsmouth
Matt, i told you the skirts were different and not to get them all nicely painted if they have to be modified 
i think you really do need some help with this one mate, just my advice though
i think you really do need some help with this one mate, just my advice though

E30 Parts Galore!! 07901 888019
[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
you can take a horse to water an all that..adit wrote:Matt, i told you the skirts were different and not to get them all nicely painted if they have to be modified
i think you really do need some help with this one mate, just my advice though
Oh well. Best of luck mate, hope all works out
-
Tom_Maverick
- E30 Zone Camper

- Posts: 1343
- Joined: Wed Aug 25, 2010 11:00 pm
- Location: Brighton
If I wasn't going on holiday for most of next month then I'd say I'll give you a hand one saturday.. If you still don't have them fitted when I'm back I'll give you a shout and we could sort something out.. Bit of a drive but I don't want your cash..

-
adit
- Married to the E30 Zone

- Posts: 13727
- Joined: Wed Jun 20, 2007 11:00 pm
- Location: portsmouth
Barx325i wrote:you can take a horse to water an all that..adit wrote:Matt, i told you the skirts were different and not to get them all nicely painted if they have to be modified
i think you really do need some help with this one mate, just my advice though
Oh well. Best of luck mate, hope all works out
he's a good lad really

E30 Parts Galore!! 07901 888019
[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
-
matt86
- E30 Zone Addict

- Posts: 2468
- Joined: Thu Jan 19, 2012 11:00 pm
- Location: "The Cotswolds" Stroud, Gloucestershire
haha, no you are right I'm a bit of a muppet
, but It was a all in job for the spray job and just though spray it, then cross the other problems later, I don't hae much confidence with things like this and worried if I try it I will f**k it up, want to say thank-you so much for the large amount of replies and advice aswell from everyone on here.
Will possibly get the bumpers on for now and worry about the rest in a bit, I might have to take Tom up on his offer, but theres no way you're driving to me mate, I'll drive down to you, I dont mind travelling for help, just can't pay anyone a massive amount, but willing to pay 30 quid or so, probably better to get it done sooner rather than later as m.o.t runs out 7th June, not the best timing really but shit happens.
I'm still a bit confused with this, as lots of different opinions and advice.
Basically I don't think its a good idea to try anything I'm unsure of as cost me 700 for the mtech kit and sprayjob, so can't take the risk of messing it up.
It's either bodyshop or someone on here I think is the best move forward.
thanks again,
Matt
p.s cheers adi for the advice the other day with the side skirts.
Will possibly get the bumpers on for now and worry about the rest in a bit, I might have to take Tom up on his offer, but theres no way you're driving to me mate, I'll drive down to you, I dont mind travelling for help, just can't pay anyone a massive amount, but willing to pay 30 quid or so, probably better to get it done sooner rather than later as m.o.t runs out 7th June, not the best timing really but shit happens.
I'm still a bit confused with this, as lots of different opinions and advice.
Basically I don't think its a good idea to try anything I'm unsure of as cost me 700 for the mtech kit and sprayjob, so can't take the risk of messing it up.
It's either bodyshop or someone on here I think is the best move forward.
thanks again,
Matt
p.s cheers adi for the advice the other day with the side skirts.
-
BenHar
- E30 Zone Addict

- Posts: 3089
- Joined: Sun Jul 11, 2010 11:00 pm
- Location: Reigate, Surrey
Have you changed the oil and cam belt yet?matt86 wrote: cost me 700 for the mtech kit and sprayjob, so can't take the risk of messing it up.
Ben
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
never ending struggle, just take your time, planning and execution is key EDIT!!!!
-
matt86
- E30 Zone Addict

- Posts: 2468
- Joined: Thu Jan 19, 2012 11:00 pm
- Location: "The Cotswolds" Stroud, Gloucestershire
cheers everyone, no haven't changed cambelt and oil yet, as I have the 2 litre running gear in grage as back up and just want to get the outside sorted first, I know it seems stupid doing bodywork first, but the engine has taken me all over the place recently, its not running spot on, but the way I see it, is I'll run it till it dies, or when funds become available and fit a 2litre or 2.5 running gear.
There's still loads I have to do to get the car spot on, but its a running resto and is along way from a shed, cleans up quite nice to be honest.
Thanks again, think I will take to the bodyshop or wait for someone to become available on here to fit the mtech kit.
There's still loads I have to do to get the car spot on, but its a running resto and is along way from a shed, cleans up quite nice to be honest.
Thanks again, think I will take to the bodyshop or wait for someone to become available on here to fit the mtech kit.
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Matt, the kit is easy to fit, you're looking at a day to do it properly.
The side pods use the origional side trim fixings, but won't go on the front wing or rear qtr, as the need to slide into the top of the botom skirt and then press into the origional holes in the wing and rear qtr.
The "Butchering" of the side skirts only requires the bottom lip to be trimmed off.
YOu don't need the template either, waste of money imo.
There are NO SCREWS needed, as everything is fixed in place via plastic holders.
The side pods use the origional side trim fixings, but won't go on the front wing or rear qtr, as the need to slide into the top of the botom skirt and then press into the origional holes in the wing and rear qtr.
The "Butchering" of the side skirts only requires the bottom lip to be trimmed off.
YOu don't need the template either, waste of money imo.
There are NO SCREWS needed, as everything is fixed in place via plastic holders.

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
matt86
- E30 Zone Addict

- Posts: 2468
- Joined: Thu Jan 19, 2012 11:00 pm
- Location: "The Cotswolds" Stroud, Gloucestershire
Cheers rav, how are you?Rav335uk wrote:Matt, the kit is easy to fit, you're looking at a day to do it properly.
The side pods use the origional side trim fixings, but won't go on the front wing or rear qtr, as the need to slide into the top of the botom skirt and then press into the origional holes in the wing and rear qtr.
The "Butchering" of the side skirts only requires the bottom lip to be trimmed off.
YOu don't need the template either, waste of money imo.
There are NO SCREWS needed, as everything is fixed in place via plastic holders.
Have you done it before? You don't fancy doing it if I drive up to you and pay you some cash do you?
If not do you think I could manage it, I'm more confused as to what I need, so far only have the fixings to attachsplitter to front bumper and the bits on the side pods that pop into the original holes on the rear quarter, doors and wing, I'm unsure as to what else I need, guessing I need something to secure the side skirts?
cheers
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Post a pic of ALL the fixings you have, then we can go through what's needed.
Yea, bring her up and i can help you get the kit on, no problem.
Yea, bring her up and i can help you get the kit on, no problem.

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
which are then screwed into with.......screwsRav335uk wrote:via plastic holders.
-
matt86
- E30 Zone Addict

- Posts: 2468
- Joined: Thu Jan 19, 2012 11:00 pm
- Location: "The Cotswolds" Stroud, Gloucestershire
ok, just ordered some from bmw and waiting for them to come through, I'm sure we can come to some sort of deal, I have 2 sets of standard headlights suitable to be smokedRav335uk wrote:Post a pic of ALL the fixings you have, then we can go through what's needed.
Yea, bring her up and i can help you get the kit on, no problem.
I will try get some pics to you soon, but may be a day or so, I'm off work this Friday 1st June till 10th June, so plenty of time free.
we'll sort something out.
Cheers Mate.
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Expanding rivetsBarx325i wrote:which are then screwed into with.......screwsRav335uk wrote:via plastic holders.
No 16
http://bmwfans.info/parts/catalog/E30/2 ... technic-2/

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
failed to noticed number 4 then?Rav335uk wrote:Expanding rivetsBarx325i wrote:which are then screwed into with.......screwsRav335uk wrote:via plastic holders.![]()
No 16
http://bmwfans.info/parts/catalog/E30/2 ... technic-2/
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
No, I ignored it, N0 16 fits just fine where No4 goes. 

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
number 5 is incompatible with number 16, you're just backtracking dudeRav335uk wrote:No, I ignored it, N0 16 fits just fine where No4 goes.
Birds moment
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
It'll workBarx325i wrote:number 5 is incompatible with number 16, you're just backtracking dudeRav335uk wrote:No, I ignored it, N0 16 fits just fine where No4 goes.
Birds moment

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
