rear brakes

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
cjdonny
E30 Zone Regular
E30 Zone Regular
Posts: 514
Joined: Sat Sep 17, 2011 11:00 pm
Location: Doncaster South Yorkshire

Post Sun May 27, 2012 4:30 pm

picked up car up last week and rear brakes were very bad

Thought id have a go my self at changing the discs & pads

car now seems like there binding? bad noise

:roll: What have i done :evil:
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sun May 27, 2012 4:33 pm

Did you wind the pistons back in before putting the new pads in?

Did you hang the calipers when removing them, to avoid damaging the brake hoses?
User avatar
cjdonny
E30 Zone Regular
E30 Zone Regular
Posts: 514
Joined: Sat Sep 17, 2011 11:00 pm
Location: Doncaster South Yorkshire

Post Sun May 27, 2012 4:42 pm

hoses are fine no leaks

i used a set of clamps to push the piston back in

err they were hard working putting the discs back on? handbreak trouble?>
318 IS
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sun May 27, 2012 4:57 pm

Handbrake is a separate mechanism that operates small shoes inside the drum of the brake disc - nothing to do with the hydraulic system of calipers and pads.
User avatar
cjdonny
E30 Zone Regular
E30 Zone Regular
Posts: 514
Joined: Sat Sep 17, 2011 11:00 pm
Location: Doncaster South Yorkshire

Post Sun May 27, 2012 4:58 pm

yeh i sort of whacked the rear discs on so im thiking the hanbrake shoes are catching?
318 IS
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sun May 27, 2012 5:28 pm

There is a chance. If so, you need to adjust them at the disc; DON'T play around with the cable nuts under the handbrake lever.
User avatar
cjdonny
E30 Zone Regular
E30 Zone Regular
Posts: 514
Joined: Sat Sep 17, 2011 11:00 pm
Location: Doncaster South Yorkshire

Post Mon May 28, 2012 12:13 am

this was problem now sorted thanks

just got a scrapeing sound now from the dust shields catching the disc :roll:
318 IS
Barx325i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6493
Joined: Wed Jul 26, 2006 11:00 pm

Post Mon May 28, 2012 12:17 am

common issue, lucky escape...