E36 bonnet insulation conversion fitted into my e30.

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
atlantis
E30 Zone Newbie
E30 Zone Newbie
Posts: 187
Joined: Sat Aug 14, 2010 11:00 pm

Post Fri May 25, 2012 3:04 pm

Think i used turps to get mine off :?

Polsta
Will post some pics when i get my car back, exhaust just fallen off :cry:

Cheers Andrew
E30 325i cabby

E39 525i sport in Atlantis blue
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Fri May 25, 2012 3:21 pm

why nissan ? is that a nissan main dealer thing ?

mine needs doing, cars going in for paint any time now, been meaning to get it all removed, but weeks of rain and not really any work on car weather, to then being scorching hot and too hot to get motiovated to do it...typical

mines a 1987, so its all very brittle and just flakes/crumbles away, i shouldnt think it will take much to get it just to the remaining glue residue
e30-EVN
Old Skooler
Old Skooler
Posts: 3382
Joined: Sun Dec 13, 2009 11:00 pm
Location: S.Wales

Post Fri May 25, 2012 7:39 pm

i took all mine out as it started to flake,, when i have the car re-painted i will not be fitting any. i will be going for the fresh paint finish for when the hood is open at shows ect.
and a few grams less weight up front will help with a big 6 there.................. i joke haha 8)
A 2 door e30 with 8 cylinders, what could be better winkeye :D
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Sat May 26, 2012 12:03 pm

but will that have any heat effect on the paint and bubble it ?
Kedge
Old Skooler
Old Skooler
Posts: 7698
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Post Sat May 26, 2012 12:11 pm

polsta wrote:but will that have any heat effect on the paint and bubble it ?
Well BMW won't have fitted it for no reason so I'd guess over time it would have an affect on the paint.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
pukar
E30 Zone Addict
E30 Zone Addict
Posts: 2225
Joined: Tue Sep 08, 2009 11:00 pm

Post Sat May 26, 2012 1:06 pm

polsta wrote:so there are 2 different types of e30 ones available ? (i thought there was only 1, as posted by dhfis with the pics)

p/n 51 48 1 925 437 as DHFIS posted

and 51488103798

is that correct ? any pictures of that one ?

Image

here is my OEM one, a smooth surfaced foam....about £35

this is the only OEM one i've seen apart from the M3 variant
Image
pukar
E30 Zone Addict
E30 Zone Addict
Posts: 2225
Joined: Tue Sep 08, 2009 11:00 pm

Post Sat May 26, 2012 1:08 pm

Kedge wrote:
polsta wrote:but will that have any heat effect on the paint and bubble it ?
Well BMW won't have fitted it for no reason so I'd guess over time it would have an affect on the paint.
...its called "sound" insulation on realoem, but i agree with kedge and say it must have a heat protection effect also.
Image
polsta
Married to the E30 Zone
Married to the E30 Zone
Posts: 10322
Joined: Fri Oct 09, 2009 11:00 pm
Location: portsmouth

Post Sat May 26, 2012 5:49 pm

pukar wrote:
polsta wrote:so there are 2 different types of e30 ones available ? (i thought there was only 1, as posted by dhfis with the pics)

p/n 51 48 1 925 437 as DHFIS posted

and 51488103798

is that correct ? any pictures of that one ?

Image

here is my OEM one, a smooth surfaced foam....about £35

this is the only OEM one i've seen apart from the M3 variant
is that new mate ? got a part number ? the one dhfis is oem from bmw also, thats what my old is had, but in my tech 1 it has the smooth stuff, hows it feel when new ? mines all brittle and a little thicker than the other, how has it lasted up ? easily damaged and scored/bits break of etc ? , the other one seemed quite durable although i have no idea what the smooth is like when new
bss325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 24532
Joined: Sat Jan 20, 2007 11:00 pm
Location: London/Surrey

Post Sat May 26, 2012 6:04 pm

suchy wrote:
polsta wrote:what was the stuff people use to remove the old insulation ?>
iirc Nissan brake fluid was aparently the best stuff to remove the old residue (after scrapping obviously)

Barry (Bss) has it in his build thread if you want to double check...
Toyota own brand of brake cleaner, with the red lid.

Remove all the crumbly foam off by hand then use the brake cleaner and a plastic scraper to remove the glue residue.
http://www.bmrperformance.co.uk

BMW and MINI specialist - Gatwick
suchy
True Zone Relic
Posts: 6604
Joined: Tue Apr 26, 2005 11:00 pm
Location: Portsmouth

Post Sat May 26, 2012 6:23 pm

Toyota!! I was nearly right!! :-)
pukar
E30 Zone Addict
E30 Zone Addict
Posts: 2225
Joined: Tue Sep 08, 2009 11:00 pm

Post Sun May 27, 2012 11:51 pm

polsta wrote:
pukar wrote:
polsta wrote:so there are 2 different types of e30 ones available ? (i thought there was only 1, as posted by dhfis with the pics)

p/n 51 48 1 925 437 as DHFIS posted

and 51488103798

is that correct ? any pictures of that one ?

Image

here is my OEM one, a smooth surfaced foam....about £35

this is the only OEM one i've seen apart from the M3 variant
is that new mate ? got a part number ? the one dhfis is oem from bmw also, thats what my old is had, but in my tech 1 it has the smooth stuff, hows it feel when new ? mines all brittle and a little thicker than the other, how has it lasted up ? easily damaged and scored/bits break of etc ? , the other one seemed quite durable although i have no idea what the smooth is like when new
it gets brittle when it is really old, so falls apart.... a new set should be fine for may years, i have had mine in for 2 years and it feels brand new. it is foam, but has a sort of harder foam on the outside so pretty durable, it also has the cutout bit where people tend to stick their cam belt service sticker. looks smart....just ask at the dealers which is what i did, i dont have the part number.
Image
User avatar
redcar
E30 Zone Squatter
E30 Zone Squatter
Posts: 1610
Joined: Wed Jul 20, 2011 11:00 pm
Location: Hertfordshire

Post Mon May 28, 2012 12:22 am

Anyone else running a strut brace which touches the foam?

Every time I open my bonnet, there's a but if the foam in my strut brace :(