Anyone know whats inside the centre box?
i have a fair idea but without chopping it open and looking its hard to be sure which of the silencing methods they have used.
Pretty much mine got hit and is rattling so i was going to be a potless looser and open it up and weld what ever has come loose back. The rest of the box is fine and it seems a waste to bin it.
Anyone know....... (exhaust question)
Moderator: martauto
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
craigieeb
- E30 Zone Addict

- Posts: 4988
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: In my man cave modifying... something
The inside is just perforated tubing, connecting the front to the rear, then just packing to quiet it down,
If it's rattling, odds are the "tube" has come away from one end or the other,
If it's rattling, odds are the "tube" has come away from one end or the other,
M50 Turbo!!!
I shall say no more 
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
thought it might just be an absorptive/glass pack style box, well direct pipe of the correct bore it is then.
It took a whack on a fairly hefty speed bump while i was off mountainbiking a couple of months back, started rattling a few weeks later and been getting worse since.
Discovered uni-part don't stock tube in straight lengths, (how fucking useless is that?)
but will be picking some up from the local motorfactors tomorrow. On my current budget (read bugger all) £117 to cure a rattle is a bit strong, a repaired bmw box will still be better than a cheep aftermarket.
It took a whack on a fairly hefty speed bump while i was off mountainbiking a couple of months back, started rattling a few weeks later and been getting worse since.
Discovered uni-part don't stock tube in straight lengths, (how fucking useless is that?)
but will be picking some up from the local motorfactors tomorrow. On my current budget (read bugger all) £117 to cure a rattle is a bit strong, a repaired bmw box will still be better than a cheep aftermarket.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
