What's the best way to do it?
Cheers.
Moderator: martauto


Indeed, i was also thinking that. I think the 4 pot carpets might be nylon weave but apparently the 6 pot carpets are much smoother/softer so it might be worth attempting to dye a 6 pot carpet rather than the 4 pot carpet.suchy wrote:Never tried it myself but can't believe dye would take properly as the carpets are a man-made material aren't they? Wasn't aware wool carpets were an option with an E30![]()
I know people have done it but how long it lasts or even how long it stays looking good is another question!!


Is it much softer and nicer compared to the 4 pot carpet. Do you have any pics?Alex wrote:Wet vac a half decent 6 pot/lux/touring carpet all ive done have come up like new and get rid of that old e30 smell



Cool, sounds good. Do you have any picturesBATTS91 wrote:i have a 318is dont know if the carpet is diffrent from other 4 pots, but i went to my local paint shop and see carpet dye in an aerosol can works well sprays out quick i think i used 3 or 4 cans looks good and it stuck to the drivers side fut part were its not carpet







The 6 pot carpet is quite a bit heavier, plus it's a better sound insulator. Depends if road noise is a concern, I go with the lighter 4 pot and it's not too bad but the 6 pot rug is noticably quieterredcar wrote:Are there any other differences apart from the material, to the 4 and 6 pot carpet?




Ok cheers mate.adit wrote:the 6-pot carpet is the softer velour ("posher") type and is nicer


Ok cheers for the advice.Jim320i wrote:Much easier to cut it, but if you take your time, you can get it out with out cutting it,the pain in the arse is getting it back in. You'll have to cut around the steering column part at the bottom anyway unless you strip everything out![]()
If you do cut it, then it wont be visable when put back in aslong as you cut it nice and closeto the matrix box![]()
If your looking for a carpet, I have a few here if your interested, send me apm and if I get a moment, I'll get you some pictures

