Replacement front wings: too cheap to be any good..?

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Post Reply
User avatar
A18RPF
E30 Zone Newbie
E30 Zone Newbie
Posts: 145
Joined: Sat Nov 01, 2008 11:00 pm
Location: Leeds

Sat May 19, 2012 11:43 pm

After a bit of an argument with a 40 ton truck, my E30 is in need of a new front wing:
Image
I figured I might as well do them both as they are a bit rusty, and my dad told me about some pattern wings on nicedeals.co.uk for £29.99:
http://www.nicedeals.co.uk/product_info ... cts_id=439
Has anyone had experience of these, or could recommend some pattern wings that aren't too crummy?
Kedge
Old Skooler
Old Skooler
Posts: 7702
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Sat May 19, 2012 11:57 pm

I'm guessing that since they are titled as "without hole" that they are the early ones without holes for the indicators.

If i was you i'd try sourcing a rust free second hand wing, if you don't have any success then try a pattern wings, genuine new BMW wings are only "approved" parts any way and you can tell them apart from the original E30 wings.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
User avatar
A18RPF
E30 Zone Newbie
E30 Zone Newbie
Posts: 145
Joined: Sat Nov 01, 2008 11:00 pm
Location: Leeds

Sun May 20, 2012 12:05 am

Would wings for earlier models fit a later one? I'd be tempted to go without side repeaters for the money, or to cut my own holes! I will try source some originals, as I also need a front valance
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9538
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Sun May 20, 2012 12:07 am

Id choose good second hand wings over pattern parts any day of the week.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
Kedge
Old Skooler
Old Skooler
Posts: 7702
Joined: Thu Jan 13, 2005 11:00 pm
Location: Leicestershire

Sun May 20, 2012 12:13 am

A18RPF wrote:Would wings for earlier models fit a later one? I'd be tempted to go without side repeaters for the money, or to cut my own holes! I will try source some originals, as I also need a front valance
They would fit but due to the MOT regs you'd still need to find a way of fitting side repeaters.
Image
'86 Polaris 316 M20B28 Rebuild
Instagram - Kedge85
Ajsingh
E30 Zone Addict
E30 Zone Addict
Posts: 2378
Joined: Sun Mar 28, 2010 11:00 pm
Location: West Laaaandaan init! / Milton Keynes

Sun May 20, 2012 1:14 am

I had a friend try and fit pattern wings to his e30 and it was a no go. They wouldn't line up..... I too would go for 2nd rot free or BMW wings
E30 Crazy!
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Sun May 20, 2012 7:31 am

B7
E30 Zone Team Member
E30 Zone Team Member
Posts: 15846
Joined: Tue Feb 13, 2007 11:00 pm
Location: Surrey / West Sussex

Sun May 20, 2012 7:44 am

Its a common colour. There must be someone breaking an alpine saloon somewhere.

Speak to Adit. He may have some.

Original genuine panels over pattern all day long :wink:
B7's Motto. "If it's French, BURN IT!!!!!!"
User avatar
e30mtech
E30 Zone Regular
E30 Zone Regular
Posts: 430
Joined: Wed Dec 05, 2007 11:00 pm
Location: glenrothes, fife

Sun May 20, 2012 4:15 pm

kitch
E30 Zone Regular
E30 Zone Regular
Posts: 878
Joined: Sat Nov 01, 2008 11:00 pm

Sun May 20, 2012 5:09 pm

Euro car parts do pattern wings for about £30, they're ok but don't fit as well as genuine ones obviously
Image
Tan91
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Fri Jun 20, 2008 11:00 pm
Location: West London

Sun May 20, 2012 6:19 pm

After my accident I put a pattern passenger wing on myn as I needed the car on the road...load of shyt.

Did not line up at all and left a gap near the grill, but recently I bought one of ebay, from a shop called bmwspareshop really good contact, I got a genuine one for less than the pattern part no rust incl delivery, and did a test fit and lines up near enough 100%. Don't waste your time on pattern parts.

Quality = Poor.
Alpina99
E30 Zone Camper
E30 Zone Camper
Posts: 1000
Joined: Sat Nov 17, 2007 11:00 pm
Location: Portsmouth

Sun May 20, 2012 6:36 pm

Tanveer wrote:After my accident I put a pattern passenger wing on myn as I needed the car on the road...load of shyt.

Did not line up at all and left a gap near the grill, but recently I bought one of ebay, from a shop called bmwspareshop really good contact, I got a genuine one for less than the pattern part no rust incl delivery, and did a test fit and lines up near enough 100%. Don't waste your time on pattern parts.

Quality = Poor.
+1 on bmwspareshop on ebay,
After the service I got with a steering pump recently I can only recommend him too,
Gone, but not forgotten !!
User avatar
e30mtech
E30 Zone Regular
E30 Zone Regular
Posts: 430
Joined: Wed Dec 05, 2007 11:00 pm
Location: glenrothes, fife

Sun May 20, 2012 8:21 pm

Alpina99 wrote:
Tanveer wrote:After my accident I put a pattern passenger wing on myn as I needed the car on the road...load of shyt.

Did not line up at all and left a gap near the grill, but recently I bought one of ebay, from a shop called bmwspareshop really good contact, I got a genuine one for less than the pattern part no rust incl delivery, and did a test fit and lines up near enough 100%. Don't waste your time on pattern parts.

Quality = Poor.
+1 on bmwspareshop on ebay,
After the service I got with a steering pump recently I can only recommend him too,

+2 i have also bought several quality items for my project
kman82
E30 Zone Regular
E30 Zone Regular
Posts: 967
Joined: Mon Sep 22, 2008 11:00 pm
Location: Oxford

Sun May 20, 2012 8:49 pm

Just find a good second hand one in the correct colour, will be much cheaper in the long run if you dont have to paint them.
Tan91
E30 Zone Regular
E30 Zone Regular
Posts: 368
Joined: Fri Jun 20, 2008 11:00 pm
Location: West London

Mon May 21, 2012 11:39 pm

e30mtech wrote:
Alpina99 wrote:
Tanveer wrote:After my accident I put a pattern passenger wing on myn as I needed the car on the road...load of shyt.

Did not line up at all and left a gap near the grill, but recently I bought one of ebay, from a shop called bmwspareshop really good contact, I got a genuine one for less than the pattern part no rust incl delivery, and did a test fit and lines up near enough 100%. Don't waste your time on pattern parts.

Quality = Poor.
+1 on bmwspareshop on ebay,
After the service I got with a steering pump recently I can only recommend him too,

+2 i have also bought several quality items for my project
His postage is not bad either and most of his products for sale are near enough 99% not broken, very reliable.
User avatar
A18RPF
E30 Zone Newbie
E30 Zone Newbie
Posts: 145
Joined: Sat Nov 01, 2008 11:00 pm
Location: Leeds

Tue May 22, 2012 9:52 am

Cheers for all the helpful info, I will check this guy out on eBay and will most likely be putting a wanted ad on here for the other bits I need to repair the damage. Tbh I thought the prices of pattern parts were a but too cheap to be good quality
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Tue May 22, 2012 2:11 pm

B7 wrote:Its a common colour. There must be someone breaking an alpine saloon somewhere.

Speak to Adit. He may have some.

Original genuine panels over pattern all day long :wink:

Me. I have front wings but I intended to respray the car so theyr currently rust proofing colour and would need sprayed :/
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
Post Reply